Connect 0x0000

SwitchKit Name

Connect

Type

EXS API and SwitchKit API message

Description

Connect 0x0000

This message instructs the CSP to establish a two-way connection between the two channels specified, for example, Channel A and Channel B.

If there is no active call up for Channel B, a seizure will be generated on that channel, and once seize ACKs have been met, the voice path is connected.

NOTE: This message treats the first span/channel and the second span/channel the same regardless of their inbound or outbound nature. Therefore, the answer supervision mode of only the second span/channel is meaningful in the Connect API message.

Sent by

Host

Example Message (Socket Log Output for SwitchKit)

For EXS API, the example message below configures the CSP to establish a two-way connection between span 01 channel 01 and span 02 channel 02:

For SwitchKit, the socket log output below shows configuration of the CSP, which establishes a two-way connection between span 01 channel 01 and span 02 channel 02:

00 11 00 00 00 00 FF 00 02 0D 03 00 01 01 0D 03 00 02 02

SwitchKit Code

C Structure

typedef struct {

unsigned short SpanA;

UBYTE ChannelA;

unsigned short SpanB;

UBYTE ChannelB;

} XL_Connect;

C++ Class

class XLC_Connect : public XLC_OutboundMessage {

public:

unsigned short getSpanA() const;

void setSpanA(unsigned short x);

UBYTE getChannelA() const;

void setChannelA(UBYTE x);

unsigned short getSpanB() const;

void setSpanB(unsigned short x);

UBYTE getChannelB() const;

void setChannelB(UBYTE x);

};

EXS API Hex Format