J1 Span Configure 0x0019

Configuration API Messages

SwitchKit Name

J1SpanConfig

Type

EXS API and SwitchKit API message

Description

J1 Span Configure 0x0019

This message is used by the host to configure the transmitted pattern of certain bits in different frames of a multi-frame over the J-ONE interface.

NOTE: Before changing span configuration, Dialogic ALWAYS RECOMMENDS that you de-assign the spans, assign them again and then send the new span configuration.

Sent by

Host

SwitchKit Code

Configuration

J1SpanConfig (

Node = integer,

StartSpanRange = integer,

EndSpanRange = integer,

ChanData = byte array,

FrameData = byte array);

C Structure

typedef struct {

unsigned short StartSpanRange;

unsigned short EndSpanRange;

UBYTE ChanData[6];

UBYTE FrameData[217];

} XL_J1SpanConfig;

C++ Class

class XLC_J1SpanConfig : public XLC_SpanRangeMessage {

public:

XBYTE getStartSpan() const;

XBYTE getEndSpan() const;

void setStartSpan(XBYTE s);

void setEndSpan(XBYTE s);

unsigned short getStartSpanRange() const;

void setStartSpanRange(unsigned short x);

unsigned short getEndSpanRange() const;

void setEndSpanRange(unsigned short x);

const UBYTE *getChanData() const;

UBYTE *getChanData();

void setChanData(UBYTE *x);

const UBYTE *getFrameData() const ;

UBYTE *getFrameData();

void setFrameData(UBYTE *x);

};

EXS API Hex Format