Inseize Control 0x002B

SwitchKit Name

InseizeControl

Type

EXS API and SwitchKit API message

Description

Inseize Control 0x002B

Use this message to control incoming call setup during real-time call processing on a specified channel. Instructions and data are passed in this message in the form of Information Control Blocks (ICBs).

You can preprogram a list of instructions using the Inseize Instruction List Configure message and initiate them by sending the Inseize Control message with an ICB of "Use Instruction List".

The system does not replace the default instruction list with the list you specify with the "Use Instruction List" ICB. The system concatenates the list you specify in this message to the default list.

An instruction that is not carried out is reported via a negative acknowledgment. A positive acknowledgment is reported only if you include a "Send Host Acknowledgment" Action ICB in the message.

Related Messages

• Inseize Instruction List Configure 0x0029 (InseizeInstrListConfig)

• Call Control Instructions Query 0x0087 (CallControlInstructionQuery)

Sent by

Host

SwitchKit Code

C Structure

typedef struct {

unsigned short Span;

UBYTE Channel;

UBYTE ICBCount;

UBYTE ICBData[222];

} XL_InseizeControl;

C++ Class

class XLC_InseizeControl : public XLC_OneChannelOutbound {

public:

unsigned short getSpan() const;

void setSpan(unsigned short x);

UBYTE getChannel() const;

void setChannel(UBYTE x);

UBYTE getICBCount() const;

void setICBCount(UBYTE x);

const UBYTE *getICBData() const;

UBYTE *getICBData();

void setICBData(UBYTE *x);

};

EXS API Hex Format