Channel Release Request 0x0037

SwitchKit Name

ChannelReleaseRequest

Type

EXS API and SwitchKit API message

Description

Channel Release Request 0x0037

The conditions in which the CSP uses this message depends on the protocol you are using.

SS7

An SS7 channel reports this message to the host if both of the following conditions exist:

• The SS7 channel is connected to a channel that is released

• The release modes for the channels call for the SS7 channel to be released

This lets the host insert parameters for the outgoing ISUP REL using the Release Channel With Data message. If no data is to be inserted, the host may use the Release Channel message.

ISDN

The CSP sends this message to the host upon a network-initiated ISDN Disconnect message if the ISUP mode configuration is set to allow release upon a disconnect. The host responds with either a Release Channel message or a Release Channel With Data message to send information to the ISDN with the release.

Sent by

CSP

SwitchKit Code

C Structure

typedef struct {

unsigned short Span;

UBYTE Channel;

UBYTE ReleaseDataType;

UBYTE Data[222];

} XL_ChannelReleaseRequest;

C++ Class

class XLC_ChannelReleaseRequest : public XLC_OneChannelMessage {

public:

unsigned short getSpan() const;

void setSpan(unsigned short x);

UBYTE getChannel() const;

void setChannel(UBYTE x);

UBYTE getReleaseDataType() const;

void setReleaseDataType(UBYTE x);

const UBYTE *getData() const;

UBYTE *getData();

void setData(UBYTE *x);

};

EXS API Hex Format