Recorded Announcement Connect 0x0055

SwitchKit Name

RecAnnConnect

Type

EXS API and SwitchKit API message

Description

Recorded Announcement Connect 0x0055

Use this message to connect a channel to one or a series of downloaded voice recorded announcements (RANs).

NOTE: You can use this message for the DSP Series 2 card, but only for RAN IDs below 4096. In CSPs using the DSP Series 2 card with the DSP-ONE card, the CSP Matrix Series 3 Card examines the announcement ID(s) and determines if there are any DSP-ONE cards that can play the entire list of announcements. If there is no DSP-ONE card that can do this, the request is passed to the DSP Series 2 card. Because of this, the DSP Series 2 card must either have all the same announcements loaded onto it as all the DSP-ONEs via TFTP, or all the announcements must be accessible via NFS.

Sent by

Host

C Structure

typedef struct {

unsigned short Span;

UBYTE Channel;

UBYTE Config;

UBYTE Event;

UBYTE Cnt;

unsigned short ID1;

unsigned short ID2;

unsigned short ID3;

unsigned short ID4;

unsigned short ID5;

unsigned short ID6;

unsigned short ID7;

unsigned short ID8;

unsigned short ID9;

unsigned short ID10;

UBYTE OtherIDs[200];

} XL_RecAnnConnect;

C Structure Response

typedef struct {

unsigned short Status;

unsigned short Span;

UBYTE Channel;

} XL_RecAnnConnectAck;

C++ Class

class XLC_RecAnnConnect : public XLC_OneChannelOutbound {

public:

unsigned short getSpan() const;

void setSpan(unsigned short x);

UBYTE getChannel() const;

void setChannel(UBYTE x);

UBYTE getConfig() const;

void setConfig(UBYTE x);

UBYTE getEvent() const;

void setEvent(UBYTE x);

UBYTE getCnt() const;

void setCnt(UBYTE x);

unsigned short getID1() const;

void setID1(unsigned short x);

unsigned short getID2() const;

void setID2(unsigned short x);

unsigned short getID3() const;

void setID3(unsigned short x);

unsigned short getID4() const;

void setID4(unsigned short x);

unsigned short getID5() const;

void setID5(unsigned short x);

unsigned short getID6() const;

void setID6(unsigned short x);

unsigned short getID7() const;

void setID7(unsigned short x);

unsigned short getID8() const;

void setID8(unsigned short x);

unsigned short getID9() const;

void setID9(unsigned short x);

unsigned short getID10() const;

void setID10(unsigned short x);

const UBYTE *getOtherIDs() const;

UBYTE *getOtherIDs();

void setOtherIDs(UBYTE *x);

};

C++ Class Response

class XLC_RecAnnConnectAck : public

XLC_AcknowledgeMessage {

public:

unsigned short getStatus() const;

void setStatus(unsigned short x);

unsigned short getSpan() const;

void setSpan(unsigned short x);

UBYTE getChannel() const;

void setChannel(UBYTE x);

};

 

 

EXS API Hex Format

MESSAGE (White)

RESPONSE (Gray)

Byte

Field Description

Byte

Field Description

0

Frame (0xFE)

0

Frame (0xFE)

1, 2

Length (0x00NN)

1, 2

Length (0x0007)

3, 4

Message Type (0x0055)

3, 4

Message Type (0x0055)

5

Reserved (0x00)

5

Reserved (0x00)

6

Sequence Number

6

Same Sequence Number

7

Logical Node ID

7

Logical Node ID

:

 

AIB

Address Method

0x00 - Individual AEs

Number of AEs to follow

AE

0x0D Channel

8, 9

Status (MSB, LSB)

10, 11

State (MSB, LSB)

If the preceding Status field is a positive acknowledgement, this field does not apply.

:

AIB (same as message)

:

Checksum

:

Configuration Flag

This field is a bit mask.

Bit

0 If set, enables Barge-In feature. The channel connects to an announcement even if the
announcement is in progress. This is valid only if the announcement count is 0x01.

 

1-7 Reserved (must be 0x00)

:

Event Flag

This field is a bit mask.

 

Bit

0 - If set, a Call Processing Event of "Recorded Announcement Completed" (0x26) is
generated when the announcement is complete.

 

1 - If set, a Call Processing Event of "Recorded Announcement Started" (0x25) is generated when the announcement starts.

 

2-7 - Reserved (Must be 0x00)

:

Announcement Count (n)

Number of announcements to follow. The host can chain together multiple announcements to
be played out in sequence to a channel (0x01-0x40).

:

Announcement ID [0, 1]

:

Announcement ID [2, 3]

:

:

:

Announcement ID [x, y]

:

Checksum