EXNET Ring Configure 0x0074

You are here: CSP API Reference > 1 EXS & SwitchKit API Messages > EXNET Ring Configure 0x0074

SwitchKit Name

RingConfig

Type

EXS API and SwitchKit API message

Description

EXNET Ring Configure 0x0074

Use this message to configure the EXNET® ring.

The configuration includes:

• Logical Ring ID

• EXNET-ONE Card Diagnostics

• Prepare For Addition

• Expand Ring

• Loop Back Port

• Add Node

Sent by

Host

SwitchKit Code

Configuration

RingConfig (

Node = integer,

Slot = integer,

Ring = integer,

Entity = integer,

Data = byte array);

C Structure

typedef struct {

UBYTE AddrInfo[30];

UBYTE Entity;

UBYTE Data[222];

} XL_RingConfig;

C++ Class

class XLC_RingConfig : public XLC_OutboundMessage {

public:

const UBYTE *getAddrInfo() const;

UBYTE *getAddrInfo();

void setAddrInfo(UBYTE *x);

UBYTE getSlot() const;

void setSlot(UBYTE x);

UBYTE getEntity() const;

void setEntity(UBYTE x);

const UBYTE *getData() const;

UBYTE *getData();

void setData(UBYTE *x);

};

Overview of message

The following table provides an overview of this message. The table following it, provides the detail for each byte.

MESSAGE (White)		RESPONSE (Gray)
Byte	Field Description	Byte	Field Description
0	Frame (0xFE)	0	Frame (0xFE)
1, 2	Length (0xNNNN)	1, 2	Length (0x0007)
3, 4	Message Type (0x0074)	3, 4	Message Type (0x0074)
5	Reserved (0x00)	5	Reserved (0x00)
6	Sequence Number	6	Same Sequence Number
7	Logical Node ID	7	Logical Node ID
:	AIB (starting with byte 0)	8, 9	Status MSB, LSB
:	AIB (starting with byte 0)	10	Checksum
:	Entity
:	Data
:	:
:	Checksum

EXS API Hex Format - Detailed

MESSAGE (White)		RESPONSE (Gray)
Byte	Field Description	Byte	Field Description
0	Frame (0xFE)	0	Frame (0xFE)
1, 2	Length (0xNNNN)	1, 2	Length (0x0007)
3, 4	Message Type (0x0074)	3, 4	Message Type (0x0074)
5	Reserved (0x00)	5	Reserved (0x00)
6	Sequence Number	6	Same Sequence Number
7	Logical Node ID	7	Logical Node ID
:	AIB Address Method 0x00 - Individual AEs	8, 9	Status MSB, LSB If the MSB of this field is 0x50 (NACK), the LSB indicates the NACK reason. 0x47 Invalid Ring Loop Timing This value is returned when trying to set a node to be master-configurable, if the ring timing has already been derived. 0xC0 Action Denied A value of Action Denied (0xC0) is returned if the user is trying to set an EXNET-ONE card.
	Number of AEs to follow	10	Checksum


	AEs 0x01 Slot to configure these entities: 0x01 Logical Ring ID 0x04 EXNET T-ONE Card Diagostics 0x05 Prepare for Addition 0x06 Expand Ring 0x07 Loopback Port 0x08 Add Note OR 0x1A EXNET Ring
	to configure these entities: 0x02 Transmit Mode 0x03 Number of Packets 0x04 EXNET-ONE Card Diagnostics 0x05 Prepare For Addition 0x06 Expand Ring 0x07 Loop Back Port 0x08 Add Node 0x09 Master-configurable 0x0A Ring Mode
:	Entity 0x01Logical Ring ID 0x02Transmit Mode 0x03Configure Number of Packets 0x04EXNET-ONE Card Diagnostics 0x05Prepare For Addition0x06Expand Ring 0x07Loop Back Port 0x08Add Node0x09Master-configurable 0x0ARing Mode
:	Data
	0x01 Assign Ring Data[0] Logical Ring ID De-assigning an EXNET Ring Use the values below to de-assign a specific ring or all rings on a node:
	0x02 Configure Transmit Mode Data[0] Transmit Mode 0x00 Receive Only 0x01 Transmit and Receive
	0x03 Configure Number of Packets Data[0] Number of Packets 0x01 - No longer used. 0x03 - No longer used. 0x04 - Four packets (E1, J1, VDAC-ONE, IP Network Interface Series 2, and PCI H.100 EXNET Connect nodes).
	0x04 EXNET-ONE Card Diagnostics Data[0] EXNET-ONE Card Diagnostics 0x00 Reserved 0x01 Non-Forced, Internal Loop Back 0x02 Non-Forced, External Loop Back 0x03 Forced, Internal Loop Back 0x04 Forced, External Loop Back The Non-Forced mode is used to prevent execution of EXNET-ONE Card Diagnostics procedure while EXNET® Ring is up and running. Performing EXNET-ONE Card Diagnostics will take the EXNET® Ring out of service. *The External Loop Back mode can be used when both I/O ports are externally looped back with fiber optic cabling.
	0x05 Prepare For Addition There is no data associated with this entity. 0x06 Expand Ring There is no data associated with this entity. 0x07 Loop Back Port Node ID of the neighbor CSP node. This message must be sent to the node that will loopback its "A" port. The neighbor node will automatically loopback "B" port. Data[0] 0x00 Logical Node ID of node whose "B" port will be looped back. 0x08 Add Node There is no data associated with this entity.
	0x09 Master-configurable The value of this field indicates whether or not a node is allowed to become the EXNET® Ring Master. Valid entries for these fields, based on the value of the Entity field value 0x09, are as follows: Data[0] Allow Master Arbitration Flag. 0x00 Do not allow this node to participate in EXNET® Ring Master Arbitration. 0x01 Allow this node to participate in EXNET® Ring Master Arbitration. (Default for CSP 2090 and CSP 2040 nodes)
	0x0A Ring Mode The Ring Mode entity configures the Enhanced Fault Tolerance Ring Mode. Data[0] Ring Mode 0x00 Reserved 0x01 Enhanced Fault Tolerance Ring Mode This mode adds enhanced Single Ring Redundancy with seamless switchover support, run-time software link validation, enhanced live node insertion, and overall improved performance and stability. This mode is recommended for homogenous second generation EXNET® rings.
:	Checksum

Field	Field Value to Deassign a Specific Ring	Field Value to Deassign All Rings
AIB	Slot #	0xFF
Entity	0x01 (Assign Ring)
Data[0]– Logical Ring ID	0xFF