The Response Data is dependent on the Query Type.

0x01 Local SSN Table

Data[0] Subsystem Number

Data[1] Subsystem Status

0x00 Prohibited

0x01 Allowed

Number of Network DPC/SSNs (1 byte)

DPC 1 (4 bytes)

Network SSN 1 (1 byte)

Network SSN 1 Status (1 byte)

:

DPC n (4 bytes)

Network SSN n

Network SSN n Status (1 byte)

Number of Hosts (1 byte)

Local/Matrix Host (1 byte)

Port ID (1 byte)

Data[2] Routing Flag

0x00 SCCP Route network message directly to host

0x01 SCCP Route network message to TCAP

Data[3] Number of Adjacent Translators

Data[4-7] Adjacent Translator 1 (4 bytes)

:

Adjacent Translator n (4 bytes)

Number of Other Concerned Point Codes (1 byte)

Other Concerned Point Code 1 (4 bytes)

:

Other Concerned Point Code n (4 bytes)

Number of Network DPC/SSNs (1 byte)

DPC 1 (4 bytes)

Network SSN 1 (1 byte)

Network SSN 1 Status (1 byte)

0x00 Prohibited

0x01 Allowed

:

DPC n (4 bytes)

Network SSN n

Network SSN n Status (1 byte)

0x00 Prohibited

0x01 Allowed

Number of Hosts (1 byte)

Local/Matrix Host (1 byte)

Port ID (1 byte)

0x02 SCCP/TCAP Default Parameter Table

Data[0-1] Parameter Type

Data[2-3] Parameter Length

Data[4+] Parameter Value

Refer to the Developer’s Guide: Common Channel Signaling for Parameter Information.

0x03 SSN Default Parameter Table

Data[0] Subsystem Number

Data[1-2] Parameter Type

Data[3-4] Parameter Length

Data[5+] Parameter Value

Refer to the Developer’s Guide: Common Channel Signaling for Parameter Information.

0x05 TCAP Active Transactions

Data[0] Subsystem Number

Data[1-4] Dialog ID (4 bytes)

Data[5-8] Transaction Originating Transaction ID (4 bytes)

Data[9-12] Transaction Responding Transaction ID (4 bytes)

Data[13] Transaction State

ANSI

The following Transaction State values apply for ANSI:

0x00 Idle

0x01 Query Without Permission package has been sent

0x02 Query With Permission package has been sent

0x03 Query Without Permission package has been received

0x04 Query With Permission package has been received

0x05 Conversation With Permission package has been received

0x06 Conversation Without Permission package has been received

0x07 Conversation Without Permission package has been sent

0x08 Conversation With Permission package has been sent

ITU

The following Transaction State values apply for ITU:

0x00 Idle

0x01 Initiation Received

0x02 Initiation Sent

0x03 Active

The following bytes are the stored CGPA for this transaction:

Data[14-15] CGPA Parameter Type

Data[16–17] Parameter Length

Data[18+] Parameter Value

The following bytes are the stored CGPA for this transaction:

Data[:] CDPA Parameter Type

Data[:] Parameter Length

Data[:+] Parameter Value

Data[:] :

Refer to the Developer’s Guide: Common Channel Signaling for Parameter Information.

Data[:] Reserved

0x06 TCAP Active Operations

Data[0] Subsystem Number

Data[1-5] Dialog ID (4 bytes)

Data[6-7] Operation Invoke ID

Data[8-9] Operation Correlation ID

The MSB is always 0x00 unless the Correlation ID is not available, in which case it is 0xFF)

Data[10] Operation State

ANSI

The following Operation State values apply for ANSI:

0x00 Idle The operation is not initiated

0x01 Operation is Pending The state machine is waiting for an incoming component from the network

0x02 Operation is in Progress The state machine is expecting the host to send a responding component

0x03 Operation Local Pending All components required for this operation are stored in TCAP.
A Dialog primitive must be sent to send the components to the network.
In this state, any component received for this operation from the network or the host
will be rejected.

ITU

The following Operation State values apply for ITU:

0x00 Idle

0x01 Operation Sent Class 1

0x02 Wait for Reject

0x03 Operation Sent Class 2

0x04 Operation Sent Class 3

0x05 Operation Sent Class 4

Data[9-12] Reserved

0x0B Number of active dialogs and invocations

Data[0-3] number of active dialogs
Data[4-7] number of active invocations
Data[8-11] next available dialog ID stack will use for the next incoming new dialog

0x0C TLV Format Configuration Contents

0x09D1 Global Title Group Query Response

0x09D2 Global Title Entry Query Response