Become Active 0x00A1

SwitchKit Name

ActivateMatrix

Type

EXS API and SwitchKit API message

Description

Become Active 0x00A1

For EXS API

Use this message to initiate a switchover in an CSP with a redundant CSP Matrix Series 3 Card or SS7 card. You must send this message to the standby CSP Matrix Series 3 Card from the matrix host or send this message to the standby SS7 card from the SS7 local host. If you send this message to the active CSP Matrix Series 3 Card or active SS7 card, it has no effect on the CSP.

Dialogic recommends sending this message from the Matrix host to initiate a switchover to the standby CSP Matrix Series 3 Card or sending this message from the SS7 local host to initiate a switchover to the standby SS7 card.

For SwitchKit API

ActivateMatrix() initiates a Matrix switchover regardless of what parameters are passed in. With EXS SwitchKit you must send a function call to sk_activateExnetMatrix(). You cannot send the message directly to the standby CSP Matrix Series 3 Card.

EXS SwitchKit API does not support sending this message from the host to the standby SS7 card.

Sent by

Host

EXS API Hex Format

MESSAGE (White)

RESPONSE (Gray)

Byte

Field Description

Byte

Field Description

0

Frame (0xFE)

0

Frame (0xFE)

1, 2

Length (0x0005)

1, 2

Length (0x0007)

3, 4

Message Type (0x00A1)

3, 4

Message Type (0x00A1)

5

Reserved (0x00)

5

Reserved (0x00)

6

Sequence Number

6

Same Sequence Number

7

Logical Node ID

7

Logical Node ID

8

Checksum

8, 9

Status MSB, LSB

10

Checksum