D Channel Facility List Configure 0x00C6

SwitchKit Name

DChannelFacilityListConfig

Type

EXS API and SwitchKit API message

Description

D Channel Facility List Configure 0x00C6

This message is used by the host to add or delete spans from the facility list of D channels in NFAS mode. A D channel can control up to 20 spans of NI2 channels and 10 spans for all other channel types. The span where the D channel is assigned is automatically added to the facility list as Facility 0. You do not need to add it to the facility list using this message.

Sent by

Host

SwitchKit Code

Configuration

DChannelFacilityListConfig (

Node = integer,

Span = integer,

Channel = integer,

FacilitySpan = integer,

Action = integer,

FacilityNum = integer);

C Structure

typedef struct {

unsigned short Span;

UBYTE Channel;

unsigned short FacilitySpan;

UBYTE Action;

UBYTE FacilityNum;

} XL_DChannelFacilityListConfig;

C++ Class

class XLC_DChannelFacilityListConfig : public XLC_OutboundMessage {

public:

unsigned short getSpan() const;

void setSpan(unsigned short x);

UBYTE getChannel() const;

void setChannel(UBYTE x);

unsigned short getFacilitySpan() const;

void setFacilitySpan(unsigned short x);

UBYTE getAction() const;

void setAction(UBYTE x);

UBYTE getFacilityNum() const;

void setFacilityNum(UBYTE x);

};

EXS API Hex Format

Use the Channel and Span address type for this message. The table that follows shows you the format for addressing the span for Facility 0. Repeat the same format for facilities 1–9 (0x01–0x09) or 1-19 (0x01–0x13) for NI2 channels only.