Span Filter Configure 0x00CD

SwitchKit Name

Span Filter Config

Type

EXS API and SwitchKit API message

Description

Span Filter Configure 0x00CD

This message is used to configure the detection of a Carrier Group Alarm (CGA), such as an AIS (Alarm Indication Signal) or LOF (Loss of Frame).

The "CGA Detected" validation timer determines how long a CGA alarm must be detected before the CSP informs the host with an Alarm message. The default is 2.5 seconds. The host will also receive a DS0 Status Change message of "Out Of Service" for the channels on the span.

The "CGA Cleared" validation timer is initiated after a CGA alarm has been detected and then clears. It determines how long the CSP must go without detecting a CGA alarm before informing the host with an Alarm Cleared message. The default is 12 seconds. The host will also receive a DS0 Status Change message of "In Service" for the channels on the span.

Sent by

Host

SwitchKit Code

Configuration

SpanFilterConfig (

Node = integer,

Span = integer,

Entity = integer,

Value = integer);

C Structure

typedef struct {

unsigned short Span;

UBYTE Entity;

unsigned short Value;

} XL_SpanFilterConfig;

C++ Class

class XLC_SpanFilterConfig : public XLC_SpanMessage {

public:

unsigned short getSpan() const;

void setSpan(unsigned short x);

UBYTE getEntity() const;

void setEntity(UBYTE x);

unsigned short getValue() const;

void setValue(unsigned short x);

};

EXS API Hex Format