Virtual Card Configure 0x00E0

SwitchKit Name

VitualSlotConfig

Type

EXS API and SwitchKit API message

Description

Virtual Card Configure 0x00E0

Use this message when configuring virtual spans to simulate the adding and removing of cards that do not exist in the system. The slot numbers you configure with this message are used when configuring the virtual spans. You must send this message prior to the Assign Logical Span ID message.

NOTE: De-assigning all spans using the Assign Logical Span ID (0x00A8) message will clean up all virtual slots which acts as if the virtual cards were removed.

Related Messages

Virtual Span Configure

Sent by

Host

Example Message

The following example configures virtual slot 40 on board type 80, virtual VDAC card.

00 0d 00 E0 00 00 ff 00 00 01 01 01 02 40 80

SwitchKit Code

Configuration

VirtualSlotConfig (

Node = integer,

ConfigType = integer,

Data = byte array);

C Structure

typedef struct {

BaseFields Base;

UBYTE ConfigType;

UBYTE Data[222];

} XL_VirtualSlotConfig;

C++ Class

class XLC_VirtualSlotConfig : public XLC_OutboundMessage {

public:

UBYTE getConfigType() const;

void setConfigType(UBYTE x);

const UBYTE *getData() const;

UBYTE *getData();

void setData(UBYTE *x);

};

EXS API Hex Format

Response Data

The response data varies depending upon the value of the fields in the message.