IP Address Configure 0x00E7

SwitchKit Name

IPAddressConfig

Type

EXS API and SwitchKit API message

Description

IP Address Configure 0x00E7

Use this message to configure the subnet mask and assign either a single IP address or all IP addresses at once. You do this by matching the number of TLVs to the number of IP addresses being assigned.

You can clear IP addresses by setting all of the IP address and subnet mask data to 0xFF. If you plan to take a card with IP addresses from one chassis and insert it into another chassis, be sure to clear all IP addresses on the card first. Otherwise, there might be a conflict with the IP addresses of the cards in the new chassis.

NFS for DSP Series 2 card

To use TFTP or NFS, the DSP Series 2 card must be assigned an IP Address.

Gateway Address

In order to assign a Gateway IP Address to a VDAC mother board or any of the four modules, you must include the Gateway IP TLV in the same message as the IP Address Configure. You can not assign a Gateway IP Address in a message where the Gateway IP Address is the only TLV in the message.

Sent by

Host

SwitchKit Code

Configuration

IPAddress Config (

Node = integer,

Slot = integer,

DataType = integer,

TLVCount = integer,

Data = byte array);

C Structure

typedef struct {

UBYTE Slot;

UBYTE DataType;

UBYTE TLVCount;

UBYTE Data[221];

} XL_IPAddressConfig;

C Structure Response

typedef struct {

unsigned short Status;

UBYTE TLVCount;

UBYTE Data[250];

} XL_IPAddressConfigAck;

C++ Class

class XLC_IPAddressConfig : public XLC_OutboundMessage {

public:

UBYTE getSlot() const;

void setSlot(UBYTE x);

UBYTE getDataType() const;

void setDataType(UBYTE x);

UBYTE getTLVCount() const;

void setTLVCount(UBYTE x);

const UBYTE *getData() const;

UBYTE *getData();

void setData(UBYTE *x);

};

C++ Class Response

class XLC_IPAddressConfigAck : public XLC_AcknowledgeMessage {

public:

unsigned short getStatus() const;

void setStatus(unsigned short x);

UBYTE getTLVCount() const;

void setTLVCount(UBYTE x);

const UBYTE *getData() const;

UBYTE *getData();

void setData(UBYTE *x);

};

EXS API Hex Format