You are here: CSP API Reference > 1 EXS & SwitchKit API Messages > Clear IP Signaling Series 3 Card 0x0108
Clear IP Signaling Series 3 Card 0x0108
Type
EXS API message
Description
Clear IP Signaling Series 3 Card 0x0108
This message clears the system software on the IP Signaling Series 3 card before and/or after the IP Signaling Series 3 card interface is established. This message is sent directly to the IP Signaling Series 3 card and uses the extended logical node ID format.
To initiate the download of the new software load, you need to reset the IP Signaling Series 3 card by pushing the Reset button or using the Reset IP Signaling Series 3 Card message (0x0107).
Sent by
Example Message
The following clears the system software on the IP Signaling Series 3 card when the IP Signaling Series 3 card ID or Matrix ID is not assigned.
00 11 01 08 00 00 fe 00 02 52 02 ff ff 53 04 00 20 ff ff
Hex API Format
|
MESSAGE (White) |
RESPONSE (Gray) |
||
|
Byte |
Field Description |
Byte |
Field Description |
|
0 |
Frame (0xFE) |
0 |
Frame (0xFE) |
|
1, 2 |
Length (0xNNNN) |
1, 2 |
Length (0xNNNN) |
|
3, 4 |
Message Type (0x0108) |
3, 4 |
Message Type (0x0108) |
|
5 |
Reserved (0x00) |
5 |
Reserved (0x00) |
|
6 |
Sequence Number |
6 |
Sequence Number (same as message) |
|
7 |
Extended Logical Node ID (0xFE) |
7 |
Extended Logical Node ID (0xFE) |
|
: |
Address Method 0x00 - Individual AEs |
8, 9 |
|
|
Number of AEs to follow |
|||
|
AEs |
|||
|
: |
Checksum |
: |
AIB Same as message |
|
: |
Checksum |
||