Statistics Query 0x0121

SwitchKit Name

Statistics Query

Type

EXS API and SwitchKit API message

Description

Statistics Query 0x0121

NOTE: This message applies to the DSP Series 2 card only.

Use this message to query cache and function usage statistics that are kept on the DSP Series 2 card. The statistics are stored in cache for 16 days, and then they are replaced one-by-one with more recent statistics. At any time, you can view statistics for the past 16 days. You can configure the time to copy statistics into the buffer from one second to 86,400 seconds, in one-second increments.

This message does not support wildcards for the DSP Chip AIB, because the data that comes back from the CSP would be too long.

Sent by

Host Application

SwitchKit Code

C Structure

typedef struct {

unsigned short Status;

UBYTE reserved6[13];

UBYTE TLVCount;

UBYTE Data[250];

} XL_StatisticsQuery;

C Structure Response

typedef struct {

unsigned short Status;

UBYTE reserved[13];

UBYTE AddrInfo[251];

UBYTE TLVCount;

UBYTE Data[250];

} XL_StatisticsQueryAck;

C++ Class

class XLC_StatisticsQuery : public XLC_OutboundMessage {

public:

const UBYTE *getAddrInfo() const;

UBYTE *getAddrInfo();

void setAddrInfo(UBYTE *x);

// Extended addressing functions

// DSP Chip AIB functions

void DSPChip(UBYTE x);

UBYTE getDSPSlot() const;

void setDSPSlot(UBYTE x);

UBYTE getDSPSIMM() const;

void setDSPSIMM(UBYTE x);

// Slot AIB functions

UBYTE getSlot() const ;

void setSlot(UBYTE x);

UBYTE getDataType() const;

void setDataType(UBYTE x);

UBYTE getTLVCount() const;

void setTLVCount(UBYTE x);

const UBYTE *getData() const;

UBYTE *getData();

void setData(UBYTE *x)

};

C++ Class Response

class XLC_StatisticsQueryAck : public XLC_OutboundMessage {

public:

unsigned short getStatus() const

void setStatus(unsigned short x)

UBYTE getTLVCount() const;

void setTLVCount(UBYTE x);

const UBYTE *getData() const;

UBYTE *getData();

void setData(UBYTE *x)

;

EXS API Hex Format

* TLV 0x05F9, query type 0404 is only valid while addressing the CSP Matrix Series 3 Card slot to query Resource Points. It does not work, if you address the DSP Series 2 card slot to query Resource Points.