You are here: CSP API Reference > 1 EXS & SwitchKit API Messages > AddSS7TCAPCard
Type
EXS SwitchKit API message
Overview
The AddSS7TCAPCard message is used to make a direct TCP connection between the LLC Host and a SS7 card for the purpose of routing TCAP traffic on a separate link. This message creates the appropriate AddLLCCard messages and sends them to the LLC.
Sent by
Host, using Converged Services Administrator (CSA), webCSA or SwitchManager configuration file.
Arguments
The following table shows the arguments that you can modify:
|
Argument |
Description |
|---|---|
|
CardIP1 |
The primary SS7 card IP address in the CSP. |
|
CardIP2 |
The standby SS7 card IP address, if it exists. If there is only one SS7 card in the node, this field should be set to "", that is, the 0-length string. |
|
StackID |
The ID of the TCAP stack to which the LLC connects. |
|
SSN |
The Subsystem Number configured on the SS7 card to which the LLC should connect. |
|
ControlNode |
The logical node ID assigned to the CSP Matrix Series 3 Card which controls the chassis where the SS7 card resides. |
|
Action |
0x00 To add a connection |
C Structure
typedef struct {
char CardIP1[30];
char CardIP2[30];
UBYTE StackID;
UBYTE SSN;
int ControlNode;
UBYTE Action;
UBYTE reserved84[5];
} SK_AddSS7TCAPCard;
C++ Class
class SKC_AddSS7TCAPCard : public SKC_DummyMessage {
public:
const char *getCardIP1() const;
void setCardIP1(const char *x);
const char *getCardIP2() const;
void setCardIP2(const char *x);
UBYTE getStackID() const;
void setStackID(UBYTE x);
UBYTE getSSN() const;
void setSSN(UBYTE x);
int getControlNode() const;
void setControlNode(int x);
UBYTE getAction() const;
void setAction(UBYTE x);