0x01

PPL Event Indication format

0x00=Use RAW CGPA and CDPA format in PPL Event Indication. (default)

0x01=Use CGPA and CDPA Elements format in PPL Event Indication

0x02

User Abort Reason to use when a TCAP Transaction Abort is initiated (due to an Matrix Controller rest or switchover)

0x00 (default)

0x03

Action taken by TCAP when a subsystem is out-of-service

0x00=Do not initiate TCAP restart when subsystem out-of-service

0x01=Initiate TCAP restart when subsystem out-of-service (default)

0x04-0x05

Maximum length of the TC-primitive ICBs in PPL Event Indications

0xFF (default)

0x06

Action for dialog when timeout occurs

0x00 Do not abort the dialog

0x01 Abort the dialog

0x07

Abort reason when dialog timeout occurs

User defined

0x08

Action to be taken when an SS7 card switchover occurs

0x00 TCAP restart is not initiated (Keep all TCAP dialogs)

0x01 Initiate TCAP restart after SS7 switchover to reset TCAP dialogs

0x09

Unused

0x0A

Mandatory parameter validation

0x00 - Disable
0x01 - Enable (Default)

0x0B

Configures whether the Dialogue Terminated Parameter TLV will be included in the last TCAP indication of a dialog.

0x00 - Exclude TLV (Default)
0x01 - Include TLV

0x0C-0x11

Reserved (Do Not Use)

0x12

ICB format for indications

0x00 - Data ICB (default)

0x01 - Extended ICB
format

0x13-0xC8

Reserved (Do Not Use)