When specifying new timer values, remember that all PPL Timers are specified in 10 ms increments. For example, a PPL timer for 4 seconds is specified as 4000 (decimal, 400 x 10 ms = 4 seconds), which is the hexadecimal value of (0x190).
Timer ID |
Description |
Value (default) |
---|---|---|
0x01 |
Layer 3P BCC Response Wait |
8 seconds |
0x02 |
Signal (On-hook/Normal Polarity)/Disconnect Complete Wait |
4 seconds |
0x03 |
Layer 3 Digit Wait Timer |
4 seconds |
0x04 |
Layer 4 Clear Wait Timer |
4 seconds |
0x05 |
Layer 3 Establish Acknowledge Wait |
4 seconds |