You are here: CSP Hardware Product Descriptions > 1 Chassis > CSP 2110 Fan Tray, Rear - EXSFTR1100/EXSFTR1100R
CSP 2110 Fan Tray, Rear - EXS-FTR-1100/EXS-FTR-1100R
The rear fan tray and front fan tray, as shown below, are both required to ensure proper air flow and cooling of the CSP 2110 chassis. The rear fan tray is powered by the -48 V DC midplane bus. It can be removed with the power ON. The rear fan tray does not have an air filter, it is maintenance-free.
Refer to the Hardware Installation and Maintenance Guide to access the rear fan tray.
The part number, serial number, model number, and revision are located on the back of the fan tray.
The rear fan tray is designed to the following electrical, physical and environmental specifications.
Electrical |
Specification |
---|---|
Input Power Requirement |
-48 V DC |
Input Voltage Range |
-40 V DC to -60 V DC |
Physical |
Specification |
---|---|
Height |
11.2 cm (4.4 in.) |
Width |
43.5 (17 in.) |
Depth |
21.0 cm 8.25 in.) |
Environmental |
Specification |
---|---|
Temperature - Storage |
-40~C to 70~C (-40~F to 158~F) |
Temperature - Operation |
0~C to 50~C (32~F to 122~F) |
Temperature Shock - Storage |
-40~C to 70~C to -40~C (-40~F to 158~F to -40~F) @ 5~C/min. |
Temperature Shock - Operation |
0~C to 50~C (32~F to 122~F) @ 10~C/min. |
Humidity - Operating |
5% to 85% |
Altitude |
Up to 4000 m (13,123 ft.) |
The products related to the CSP 2110 rear fan tray are listed below.
Product |
Model No. |
RoHS Model No. |
---|---|---|
CSP 2110 Chassis |
EXS-CHA-1201 |
EXS-CHA-1201R |
This shows the location of the fan trays.