You are here: CSP Hardware Product Descriptions > 3 Line Cards > Dialogic® E-ONE 75 Ohm I/O Card - EXSEIO1010/EXSEIO1010R
Dialogic® E-ONE 75 Ohm I/O Card - EXS-EIO-1010/EXS-EIO-1010R
The Dialogic® E-ONE 75 Ohm I/O card connects the CSP to eight E1 lines and other telecommunications equipment.
Use only 75 Ohm impedance coaxial cable fitted with BNC connectors in compliance with ITU-T G.703.
The card resides in the rear card slots of a CSP 2090, CSP 2110 or CSP 2040 chassis.
The part number, serial number, model number, and revision are located on the back of the board.
The E-ONE 75 Ohm I/O card is designed to the following electrical, physical and environmental specifications.
|
Electrical |
Specification |
|---|---|
|
Supply Voltage, Vcc |
5.00V |
|
Supply Current, Vcc @ 5.0V |
0.0A (typical) |
|
Physical |
Specification |
|---|---|
|
Height |
318.5 mm (12.54 in.) |
|
Depth |
105.2 mm (4.14 in) |
|
Width |
19.7 mm (0.775 in.) |
|
Environmental |
Specification |
|---|---|
|
Temperature - Storage |
-40~C to 70~C (-40~F to 158~F) |
|
Temperature - Operation |
0~C to 50~C (32~F to 122~F) |
|
Temperature Shock - Storage |
-40~C to 70~C to -40~C (-40~F to 158~F to -40~F) @ 5~C/min. |
|
Temperature Shock - Operation |
0~C to 50~C (32~F to 122~F) @ 10~C/min. |
|
Humidity - Operating |
5% to 85% |
|
Altitude |
Up to 4000 m (13,123 ft.) |
The products related to the E-ONE 75 Ohm I/O card are listed below.
|
Product |
Model No. |
RoHS Model No. |
|---|---|---|
|
E-ONE Card |
EXS-E1C-1081 |
EXS-E1C-1081R |
|
E-ONE 75 Ohm Red I/O Card |
EXS-EIO-1210 |
EXS-EIO-1210R |
|
E-ONE 75 Ohm Standby I/O Card |
EXS-EIO-1310 |
EXS-EIO-1310R |
The front and side views show the span transmit/receive connectors.