You are here: CSP Hardware Product Descriptions > 4 Common Channel Signaling Cards > Dialogic® CCS I/O Series 3 Card - EXS7IO1300/EXS7IO1300R
Dialogic® CCS I/O Series 3 Card - EXS-7IO-1300/EXS-7IO-1300R
The Dialogic® Common Channel Signaling I/O Series 3 card allows you to use one of the following cards in a distributed environment on a CSP:
• SS7 Series 3 card
• ISDN Series 3 card
• IP Signaling Series 3 card
The single slot CCS I/O Series 3 card is paired with one of the above cards to support either a single 10 Base-T or 100 Base-T Ethernet connection, auto-selected.
The Common Channel Signaling card call control at the Server Node matrix communicates with the CSP Matrix Series 3 Card on remote nodes over the Ethernet via the CCS I/O Series 3 card. A redundant CCS card connects to the remote matrix through the Ethernet, and to the primary SS7 Series 3 card, ISDN Series 3 card, or IP Signaling Series 3 card through the CCS I/O Series 3 Redundancy Link cable.
The CCS I/O Series 3 Redundancy Link cable serves as an independent link for redundancy between the adjacent CCS I/O Series 3 cards.
Important! Redundant configurations are optional. If selected, the removal of one of a pair of CCS I/O Series 3 cards will not interrupt CCS system operation nor require user intervention.
The CCS I/O Series 3 card resides in the rear card slot of a CSP 2090, CSP 2110 or CSP 2040 chassis directly behind the corresponding CCS card.
The part number, serial number, model number, and revision are located on the back of the board.
The CCS I/O Series 3 card is designed to the following electrical, physical and environmental specifications.
Electrical |
Specification |
---|---|
Supply Voltage, Vcc |
5.00V |
Supply Current, Vcc @ 5.0V |
0.74A (typical) |
Physical |
Specification |
---|---|
Height |
318.5 mm (12.54 in.) |
Depth |
105.2 mm (4.14 in) |
Width |
19.7 mm (0.775 in.) |
Environmental |
Specification |
---|---|
Temperature - Storage |
-40~C to 70~C (-40~F to 158~F) |
Temperature - Operation |
0~C to 50~C (32~F to 122~F) |
Temperature Shock - Storage |
-40~C to 70~C to -40~C (-40~F to 158~F to -40~F) @ 5~C/min. |
Temperature Shock - Operation |
0~C to 50~C (32~F to 122~F) @ 10~C/min. |
Humidity - Operating |
5% to 85% |
Altitude |
Up to 4000 m (13,123 ft.) |
The products related to the CCS I/O Series 3 card are listed below.
Product |
Model No. |
RoHS Model No. |
---|---|---|
SS7 Series 3 Card |
EXS-SS7-1360 |
EXS-SS7-1360R |
ISDN Series 3 Card |
EXS-PRI-1300 |
EXS-PRI-1300R |
IP Call Server Card |
EXS-SCS-1000 |
EXS-SCS-1000R |
CCS I/O Series 3 |
EXS-CBL-1000 |
EXS-CBL-1000R |
The front view shows the LEDs, Redundancy Link connector and Ethernet connectors.
The table below describes the LEDs as shown in the front view of the CCS I/O Series 3 card.
LEDs |
Color/Status |
Description |
---|---|---|
Power |
Green |
Power is within acceptable limits. |
Off |
Power is not available or out of tolerance. |
|
Activity |
Green |
CCS I/O Series 3 card is active. |
Off |
CCS I/O Series 3 card is inactive. |
|
Redundancy Link Status |
Green |
High speed redundant link is active. |
Off |
High speed redundant link is inactive. |
|
Port A |
On (100 Base-T) |
S-Speed |
On (10 Base-T) |
||
On |
L-Link |
|
Off |
||
Blinking Green |
A-Activity |
|
Off |
||
Port B (Reserved for future use) |
On (100 Base-T) |
S-Speed |
On (10 Base-T) |
||
On |
L-Link |
|
Off |
||
Blinking Green |
A-Activity |
|
Off |