You are here: CSP Developers Guide: Overview > 11 Call Routing > Sample Routing TLV Configurations
Sample Routing TLV Configurations
This section includes examples of PPL Config Byte configurations of the CH component required for various routing methods.
The example in the table below shows the following PPL Config Byte configuration:
Byte 20 configures the Outseize Method to Send Call Request to Layer 4 (0x00).
Byte 21 configures the Routing Flag to Use Internal Router (0x01).
TLV 1: Bytes 5154 configure the Routing Method to Terminating Channel (0x09).
TLV 2: Bytes 5557 configure the Router Protocol ID to 0x0B, which is the default and the only protocol currently supported.
TLV 3: Bytes 5862 configure the value of the Terminating Span/Channel.
Table 11-1 PPL Config Byte Configuration
BYTE |
Description |
Value |
---|---|---|
20 |
Outseize Method |
0x00 - Send Call Request to L4 |
21 |
Routing Flag |
0x01 - Use Internal Router |
50 |
TLV Count |
0x03 |
51 |
TLV 1 Tag |
0x13 (Routing Method) |
52 |
TLV 1 Data Length |
0x02 |
53 |
TLV 1 Data[0] Routing Method (MSB) |
0x00 |
54 |
TLV 1 Data[1] Routing Method (LSB) |
0x09 (Terminating Channel or Node) |
55 |
TLV 2 Tag |
0x0F (Protocol ID) |
56 |
TLV 2 Length |
0x01 |
57 |
TLV 2 Data[0] Protocol ID |
0x0B (Default) |
58 |
TLV 3 Tag |
0x09 (Terminating Channel or Node) |
59 |
TLV 3 Data Length |
0x03 |
60 |
TLV 3 Data[0] Terminating Span MSB |
|
61 |
TLV 3 Data[1] Terminating Span LSB |
|
62 |
TLV 3 Data[2] Terminating Channel |
|
Terminating Resource Group Routing
The example in the table below shows the following PPL Config Byte configuration:
Byte 20 configures the Outseize Method to Send Call Request to Layer 4 (0x00).
Byte 21 configures the Routing Flag to Use Internal Router (0x01).
TLV 1: Bytes 5154 configure the Routing Method to Terminating Resource Group (0x15).
TLV 2: Bytes 5557 configure the Router Protocol ID to 0x0B, which is the default and the only protocol currently supported.
TLV 3: Bytes 5861 configure the value of the Terminating Resource Group ID.
Table 11-2
BYTE |
Description |
Value |
---|---|---|
20 |
Outseize Method |
0x00 - Send Call Request to L4 |
21 |
Routing Flag |
0x01 - Use Internal Router |
50 |
TLV Count |
0x03 |
51 |
TLV 1 Tag |
0x13 (Routing Method) |
52 |
TLV 1 Data Length |
0x02 |
53 |
TLV 1 Data[0] Routing Method (MSB) |
0x00 |
54 |
TLV 1 Data[1] Routing Method (LSB) |
0x15 (Terminating Resource Group) |
55 |
TLV 2 Tag |
0x0F (Protocol ID) |
56 |
TLV 2 Length |
0x01 |
57 |
TLV 2 Data[0] Protocol ID |
0x0B (Default) |
58 |
TLV 3 Tag |
0x15 (Terminating Resource Group) |
59 |
TLV 3 Data Length |
0x02 |
60 |
TLV 3 Data[0] Resource Group MSB |
|
61 |
TLV 3 Data[1] Resource Group LSB |
|
PPL Config Bytes
Terminating Span/Channel Offset Routing
The example in the table below shows the following PPL Config Byte configuration:
Byte 20 configures the Outseize Method to Send Call Request to Layer 4 (0x00).
Byte 21 configures the Routing Flag to Use Internal Router (0x01)
TLV 1: Bytes 5154 configure the Routing Method to Span/Channel Offset (0x0B).
TLV 2: Bytes 5557 configure the Router Protocol ID to 0x0B, which is the default and the only protocol currently supported.
TLV 3: Bytes 5862 configure the value of the Terminating Span/Channel Offset.
Table 11-3
BYTE |
Description |
Value |
---|---|---|
20 |
Outseize Method |
0x00 - Send Call Request to L4 |
21 |
Routing Flag |
0x01 - Use Internal Router |
50 |
TLV Count |
0x03 |
51 |
TLV 1 Tag |
0x13 (Routing Method) |
52 |
TLV 1 Data Length |
0x02 |
53 |
TLV 1 Data[0] Routing Method (MSB) |
0x00 |
54 |
TLV 1 Data[1] Routing Method (LSB) |
0x09 (Terminating Channel) |
55 |
TLV 2 Tag |
0x0F (Protocol ID) |
56 |
TLV 2 Length |
0x01 |
57 |
TLV 2 Data[0] Protocol ID |
0x0B (Default) |
58 |
TLV 3 Tag |
0x0E (Span/Channel Offset) |
59 |
TLV 3 Data Length |
0x03 |
60 |
TLV 3 Data[0] Terminating Span Offset MSB |
|
61 |
TLV 3 Data[1] Terminating Span Offset LSB |
|
62 |
TLV 3 Data[2] Terminating Channel Offset |
|
PPL Config Byte Configuration
Route Group Routing with Address Digits
The example in the table below shows the following PPL Config Byte configuration:
Byte 20 configures the Outseize Method to Send Call Request to Layer 4 (0x00)
Byte 21 configures the Routing Flag to Use Internal Router (0x01)
TLV 1: Bytes 5154 configure the Routing Method to Route Group (0x06).
TLV 2: Bytes 5557 configure the Router Protocol ID to 0x0B, which is the default and the only protocol currently supported.
TLV 3: Bytes 5861 indicate the Route Group ID.
TLV 4: Bytes 6265 indicate the stage and string number for the address digits.
Table 11-4
BYTE |
Description |
Value |
---|---|---|
20 |
Outseize Method |
0x00 - Send Outseize Control to L3 |
21 |
Routing Flag |
0x01 - Use Internal Router |
50 |
TLV Count |
0x04 |
51 |
TLV 1 Tag |
0x13 (Routing Method) |
52 |
TLV 1 Data Length |
0x02 |
53 |
TLV 1 Data[0] Routing Method (MSB) |
0x00 |
54 |
TLV 1 Data[1] Routing Method (LSB) |
0x06 (Route Group) |
55 |
TLV 2 Tag |
0x0F (Protocol ID) |
56 |
TLV 2 Length |
0x01 |
57 |
TLV 2 Data[0] Protocol ID |
0x0B (Default) |
58 |
TLV 3 Tag |
0x06 (Route Group) |
59 |
TLV 3 Length |
0x02 |
60 |
TLV 3 Data[0] Route Group ID MSB |
|
61 |
TLV 3 Data[1] Route Group ID LSB |
|
62 |
TLV 4 Tag |
0x01 (Address Digits) |
63 |
TLV 4 Data Length |
0x02 |
64 |
TLV 4 Data[0] Stage # |
0x01 |
65 |
TLV 4 Data[1] String # |
0x01 |
Sample PPL Config Byte Configuration
Terminating Channel Routing with Called Party Digits
The example in the table below shows the following PPL Config Byte configuration:
Byte 20 configures the Outseize Method to Send Call Request to Layer 4 (0x00)
Byte 21 configures the Routing Flag to Use Internal Router (0x01)
TLV 1: Bytes 5154 configure the Routing Method to Terminating Channel (0x09).
TLV 2: Bytes 5557 configure the Router Protocol ID to 0x0B, which is the default and the only protocol currently supported.
TLV 3: Bytes 5861 indicate the criteria type of Address Digits 1 (0x01).
TLV 4: Bytes 6265 indicate the stage and string number of the address digits.
Table 11-5 Sample PPL Config Byte Configuration
BYTE |
Description |
Value |
---|---|---|
20 |
Outseize Method |
0x00 - Send Outseize Control to L3 |
21 |
Routing Flag |
0x01 - Use Internal Router |
50 |
TLV Count |
0x04 |
51 |
TLV 1 Tag |
0x13 (Routing Method) |
52 |
TLV 1 Data Length |
0x02 |
53 |
TLV 1 Data[0] Routing Method (MSB) |
0x00 |
54 |
TLV 1 Data[1] Routing Method (LSB) |
0x09 (Terminating Channel) |
55 |
TLV 2 Tag |
0x0F (Protocol ID) |
56 |
TLV 2 Length |
0x01 |
57 |
TLV 2 Data[0] Protocol ID |
0x0B (Default) |
58 |
TLV 3 Tag |
0x08 (Criteria) |
59 |
TLV 3 Length |
0x02 |
60 |
TLV 3 Data[0] Criteria Type MSB |
0x00 |
61 |
TLV 3 Data[1] Criteria Type LSB |
0x01 (Address Digits 1) |
62 |
TLV 4 Tag |
0x01 (Address Digits) |
63 |
TLV 4 Data Length |
0x02 |
64 |
TLV 4 Data[0] Stage # |
0x01 |
65 |
TLV 4 Data[1] String # |
0x01 |
The example in the table below shows the following PPL Config Byte configuration:
Byte 20 configures the Outseize Method to Send Call Request to Layer 4 (0x00)
Byte 21 configures the Routing Flag to Use Internal Router (0x01)
TLV 1: Bytes 5154 configure the Routing Method to Terminating Channel (0x09).
TLV 2: Bytes 5557 configure the Router Protocol ID to 0x0B, which is the default and the only protocol currently supported.
TLV 3: Bytes 5861 indicate the criteria type of Incoming Channel (0x07).
TLV 4: Bytes 6265 indicate the stage and string number of the address digits.
TLV 5: Bytes 6668 are the Incoming Channel TLV. No data is required.
Table 11-6 Sample PPL Config Byte Configuration
Byte |
Description |
Value |
---|---|---|
20 |
Outseize Method |
0x00 - Send Outseize Control to L3 |
21 |
Routing Flag |
0x01 - Use Internal Router |
50 |
TLV Count |
0x05 |
51 |
TLV 1 Tag |
0x13 (Routing Method) |
52 |
TLV 1 Data Length |
0x02 |
53 |
TLV 1 Data[0] Routing Method (MSB) |
0x00 |
54 |
TLV 1 Data[1] Routing Method (LSB) |
0x09 (Terminating Channel) |
55 |
TLV 2 Tag |
0x0F (Protocol ID) |
56 |
TLV 2 Length |
0x01 |
57 |
TLV 2 Data[0] Protocol ID |
0x0B (Default) |
58 |
TLV 3 Tag |
0x08 (Criteria) |
59 |
TLV 3 Length |
0x02 |
60 |
TLV 3 Data[0] Criteria Type MSB |
0x00 |
61 |
TLV 3 Data[1] Criteria Type LSB |
0x07 (Incoming Channel) |
62 |
TLV 4 Tag |
0x01 (Address Digits 1) |
63 |
TLV 4 Data Length |
0x02 |
64 |
TLV 4 Data[0] Stage # |
0x01 |
65 |
TLV 4 Data[1] String # |
0x01 |
66 |
TLV 5 Tag |
0x07 (Incoming Channel) |
67 |
TLV 5 Length |
0x01 |
68 |
TLV 5 Data[0] |
X (Reserved) |
Incoming Resource Group Routing
The example in the table below shows the following PPL Config Byte configuration:
Byte 20 configures the Outseize Method to Send Call Request to Layer 4 (0x00)
Byte 21 configures the Routing Flag to Use Internal Router (0x01)
TLV 1: Bytes 5154 configure the Routing Method to Criteria (0x08).
TLV 2: Bytes 5557 configure the Router Protocol ID to 0x0B, which is the default and the only protocol currently supported.
TLV 3: Bytes 5861 indicate the criteria type of Incoming Resource Group (0x10).
TLV 4: Bytes 6265 indicate the Incoming Resource Group ID.
TLV 5: Bytes 6668 indicate the stage and string number of the address digits.
Table 11-7 Sample PPL Config Bytes Configuration
Byte |
Description |
Value |
---|---|---|
20 |
Outseize Method |
0x00 - Send Outseize Control to L3 |
21 |
Routing Flag |
0x01 - Use Internal Router |
50 |
TLV Count |
0x03 |
51 |
TLV 1 Tag |
0x13 (Routing Method) |
52 |
TLV 1 Data Length |
0x02 |
53 |
TLV 1 Data[0] Routing Method (MSB) |
0x00 |
54 |
TLV 1 Data[1] Routing Method (LSB) |
0x08 (Criteria) |
55 |
TLV 2 Tag |
0x0F (Protocol ID) |
56 |
TLV 2 Length |
0x01 |
57 |
TLV 2 Data[0] Protocol ID |
0x0B (Default) |
58 |
TLV 3 Tag |
0x08 (Criteria Type) |
59 |
TLV 3 Length |
0x02 |
60 |
TLV 3 Data[0] Criteria Type MSB |
0x00 |
61 |
TLV 3 Data[1] Criteria Type LSB |
0x10 (Incoming Resource Group) |
62 |
TLV 4 Tag |
0x10 (Incoming Resource Group ID) |
63 |
TLV 4 Length |
0x02 |
64 |
TLV 4 Data[0] Incoming Resource Group ID MSB |
|
65 |
TLV 4 Data[1] Incoming Resource Group ID LSB |
|
66 |
TLV 5 Tag |
0x01 (Address Digits 1) |
67 |
TLV 5 Data Length |
0x02 |
68 |
TLV 5 Data[0] Stage # |
0x01 |
69 |
TLV 5 Data[1] String # |
0x01 |
Incoming Resource Group Routing with Multiple Criteria
(Address Digit Type 2)
The example in the table below shows the following PPL Config Byte configuration:
Byte 20 configures the Outseize Method to Send Call Request to Layer 4 (0x00)
Byte 21 configures the Routing Flag to Use Internal Router (0x01)
TLV 1: Bytes 5154 configure the Routing Method to Criteria (0x08).
TLV 2: Bytes 5557 configure the Router Protocol ID to 0x0B, which is the default and the only protocol currently supported.
TLV 3: Bytes 5861 indicate the criteria type of Incoming Resource Group (0x10).
TLV 4: Bytes 6265 indicate the Incoming Resource Group ID.
TLV 5: Bytes 6669 indicate the stage and string number of the address digits for digit type 1.
TLV 6: Bytes 7073 is a Multiple Criteria TLV (0x0C) indicating the criteria type of Address Digits Type 2 (0x02).
TLV 7: Bytes 7477 indicate the stage and string number of the address digits for digit type 2
Table 11-8 PPL Config Bytes Configuration.
Byte |
Description |
Value |
---|---|---|
20 |
Outseize Method |
0x00 - Send Outseize Control to L3 |
21 |
Routing Flag |
0x01 - Use Internal Router |
50 |
TLV Count |
0x07 |
51 |
TLV 1 Tag |
0x13 (Routing Method) |
52 |
TLV 1 Data Length |
0x02 |
53 |
TLV 1 Data[0] Routing Method (MSB) |
0x00 |
54 |
TLV 1 Data[1] Routing Method (LSB) |
0x09 (Terminating Channel) |
55 |
TLV 2 Tag |
0x0F (Protocol ID) |
56 |
TLV 2 Length |
0x01 |
57 |
TLV 2 Data[0] Protocol ID |
0x0B (Default) |
58 |
TLV 3 Tag |
0x08 (Criteria) |
59 |
TLV 3 Length |
0x02 |
60 |
TLV 3 Data[0] Criteria Type MSB |
0x00 |
61 |
TLV 3 Data[1] Criteria Type LSB |
0x10 (Incoming Resource Group) |
62 |
TLV 4 Tag |
0x10 (Incoming Resource Group ID) |
63 |
TLV 4 Length |
0x02 |
64 |
TLV 4 Data[0] Incoming Resource Group MSB |
|
65 |
TLV 4 Data[1] Incoming Resource Group LSB |
|
66 |
TLV 5 Tag |
0x01 (Address Digits 1) |
67 |
TLV 5 Data Length |
0x02 |
68 |
TLV 5 Data[0] Stage # |
0x01 |
69 |
TLV 5 Data[1] String # |
0x01 |
70 |
TLV 6 Tag |
0x0C (Multiple Criteria) |
71 |
TLV 6 Length |
0x02 |
72 |
TLV 6 Data[0] Criteria Type MSB |
0x00 |
73 |
TLV 6 Data[1] Criteria Type LSB |
0x02 (Digit Type 2) |
74 |
TLV 7 Tag |
0x02 (Address Digits 2) |
75 |
TLV 7 Data Length |
0x02 |
76 |
TLV 7 Data[0] Stage # |
0x02 |
77 |
TLV 7 Data[1] String # |
0x01 |