ICB Type

0x02 (Data)

ICB ID

0x24

Data Length

0x10

Data[0, 1]

Key Type

The key type associates the software key with a particular locked module or hardware upgrade.

NOTE: For SS7 User Parts (except SCCP/TCAP) only one key type is required for each instance of a User Part.

0x3031 Enable SS7 TUP on all stacks

0x3032 Enable SS7 ISUP on all stacks

0x3033 Enable SS7 IUP on all stacks

0x3034 Enable SS7 SCCP/TCAP on an active SS7 card
0x3036 Enables ability to configure one or more
SS7 Virtual CICs
(This key type was for previous releases.
For the current release, use key type
0x3037 below.)

0x3037 Enables ability to configure one or more
SS7 Virtual Span/Channels

0x3038 Enables ability to configure SIP

0x3039 Enables ability to configure Call Agent with
IP Virtual Span/Channels

0x3041 Enables/Disables RFC 2833 (SIP)

0x3042 Enables ability to configure V.52

0x3043 Enables ability to configure ISDN LAPD

0x3044 Enables ability to configure QSIG

0x3045 Resource Points

0x3130 Enable System Software

0x3131 Enable Channels on IP Network Interface
Series 2 Card

0x3132 M3UA Software

0x3134 Enable MTP3 to Host
0x3830 Enable n-links on an SS7 card

0x3831 Enable n-spans on a T-ONE card

0x3832 Enable n-spans on an E-ONE card

0x3833 Enable n-spans on a J-ONE card

Data[2–15]

Encrypted Data

A 14-byte alphanumeric string containing encrypted data