0x05EF Alarm Threshold Configure
Each DSP Series 2 main board can store up to three hours of files in a local cache. Each parameter has a threshold that generates an alarm. The M and N values provide a filter. M samples out of N must exceed the threshold for an alarm to occur. Files are stored in one-second blocks.
Used in:
Generic Card Configure
Generic Card Query
VoIP Protocol Configure
VoIP Protocol Query
|
Byte |
Description |
|
0, 1 |
Tag 0x05EF Alarm Threshold Configure |
|
2, 3 |
Length 0x0008 |
|
4 |
Value[0] Alarm Number 0 (0x00) Number of Reads 1 (0x01) Total Bytes Read 2 (0x02) Average Read Delay 3 (0x03) Maximum Read Delay 4 (0x04) Number of Writes 5 (0x05) Total Bytes Written 6 (0x06) Average Write Delay 7 (0x07) Maximum Write Delay 8 (0x08) Maximum Simultaneous Files Opened 9 (0x09) Average Simultaneous Files Opened 10 (0x0A) CPU Idle Time 11 (0x0B) VRA Process Delay 12 (0x0C) VRA IO Queue Delay |
|
5 |
Value[1] Severity 0x00 Minor 0x01 Major |
|
6 |
Value[2] M Value (Hits in window) Minimum 1 (0x01) Maximum 16 (0x10) Default 3 (0x03) |
|
7 |
Value[3] N Value (Samples in window) (N >= M) Minimum 1 (0x01) Maximum 16 (0x10) Default 5 (0x05) |
|
8-11 |
Value[4-7] Threshold Value (if this is a time value, it is in microseconds) |