You are here: CSP API Reference > 1 EXS & SwitchKit API Messages > Release Channel With Data 0x0036
Release Channel With Data 0x0036
SwitchKit Name
Type
EXS API and SwitchKit API message
Description
Use this message to release a channel with network-specific information elements that supply the network with host-specific information elements. This message is typically used with ISDN controlled channels.
Sent by
SwitchKit Name
C Structure
typedef struct {
unsigned short SpanA;
UBYTE ChannelA;
unsigned short SpanB;
UBYTE ChannelB;
UBYTE ReleaseDataType;
UBYTE Data[222];
} XL_ReleaseWithData;
C++ Class
class XLC_ReleaseWithData : public XLC_OutboundMessage {
public:
unsigned short getSpanA() const;
void setSpanA(unsigned short x);
UBYTE getChannelA() const;
void setChannelA(UBYTE x);
unsigned short getSpanB() const;
void setSpanB(unsigned short x);
UBYTE getChannelB() const;
void setChannelB(UBYTE x);
UBYTE getReleaseDataType() const;
void setReleaseDataType(UBYTE x);
const UBYTE *getData() const;
UBYTE *getData();
void setData(UBYTE *x);
};
EXS API Hex Format
MESSAGE (White) |
RESPONSE (Gray) |
||
Byte |
Field Description |
Byte |
Field Description |
0 |
Frame (0xFE) |
0 |
Frame (0xFE) |
1, 2 |
Length (0x00NN) |
1, 2 |
Length (0x0007) |
3, 4 |
Message Type (0x0036) |
3, 4 |
Message Type (0x0036) |
5 |
Reserved (0x00) |
5 |
Reserved (0x00) |
6 |
Sequence Number |
6 |
Same Sequence Number |
7 |
Logical Node ID |
7 |
Logical Node ID |
8 : |
Address Method 0x00 - Individual AEs |
8, 9 |
|
Number of AEs to follow |
10, 11 |
If the preceding Status field is a positive acknowledgement, this field does not apply. |
|
AE
or
Specify either Channel A or Channel B - whichever channel did not initiate the release. You must specify the channel twice.
With SS7 calls the host receives a Channel Release Request 0x37 message to identify the channel to release.
|
12 |
Checksum |
|
: |
Release Data Type 0x01 Reserved 0x03 ISDN ICB Formatted IE and Raw IE or DASS 2/DPNSS Raw IE Data 0x04 SS7 ICB |
||
|
Number of ICBs to follow (Ignore this field if no ICBs in message.) |
||
: |
0x02 Data
0x03 Extended
|
||
|
Refer to Interworking TLVs if you have enabled interworking from the VoIP Protocol Configure 0x00EE message. |
||
: |
Checksum |