You are here: CSP API Reference > 1 EXS & SwitchKit API Messages > AdjustMessageTimeout
Type
EXS SwitchKit API message
Purpose
Use the SK_AdjustMessageTimeout message to change the default time-out for responses.
Description
SwitchKit allows all requests to the Excel platform a fixed amount of time to complete before the request is considered timed out. For most messages, this time is 15 seconds which is often acceptable for these SwitchKit-defined time-outs. However, there are times when the time-out specified is insufficient. In particular, when several time consuming messages are sent to the same node simultaneously, the time to complete a request can increase due to latency within the Excel platform. These increased delays occur primarily during configuration time.
The AdjustMessageTimeout message increases the time-out for all messages by TimeoutIncr. In other words, if an application requested that the time-out be adjusted by 10 seconds, the time-out on most messages sent by that application would become 25 seconds. Messages that have a larger default time-out would have their time-out increased by the same 10 seconds.
You must set the Action field for SK_AMT_ACTIVATE_TIMEOUT, to activate a new time-out. To set this new time-out for all applications connected to the LLC, set the NumApps field to SK_ALL_APPS. If you attempt to set a new time-out for only one application, don’t set the NumApps field.
You can reset the time-out by setting the Action field to SK_AMT_DEACTIVATE_TIMEOUT.
Sent by
Application
Arguments
The following table shows the user modifiable arguments of the AdjustMessageTimeout message:
Argument |
Description |
---|---|
Action |
Action specifies whether a new timeout gets activated or deactivated. |
TimeoutIncr |
TimeoutIncr specifies the amount of time added to the prior timeout value. |
NumApps |
NumApps specifies whether the new timeout gets set for only one or all messages. |
Configuration
AdjustMessageTimeout (
Node = integer,
ConnectionID = integer,
Action = integer,
TimeoutIncr = integer,
NumApps = integer);
C Structure
typedef struct {
UBYTE Action;
unsigned short TimeoutIncr;
UBYTE NumApps;
} SK_AdjustMessageTimeout;
C Structure Response
typedef struct {
int Status;
} SK_AdjustMessageTimeoutAck;
C++ Class
class SKC_AdjustMessageTimeout : public SKC_ToolkitMessage {
public:
UBYTE getAction() const;
void setAction(UBYTE x);
unsigned short getTimeoutIncr() const;
void setTimeoutIncr(unsigned short x);
UBYTE getNumApps() const;
void setNumApps(UBYTE x);
};
C++ Class Response
class SKC_AdjustMessageTimeoutAck : public SKC_ToolkitAck {
public:
int getStatus() const;
void setStatus(int x);
};