You are here: CSP Developer’s Guide: Common Channel Signaling > 7 SS7 PPL Information > ISUP CQS (0x0076)
Purpose
This section includes ITU and ANSI PPL Config Bytes, all PPL Events, and Timer information for the PPL Component ISUP CQS.
ISUP CQS Configuration Bytes (ITU)
Byte |
Description |
Value |
---|---|---|
0x01 |
Max Range |
31 |
0x02 |
Reserved |
0x00 |
0x03 |
Circuit State Indicator Parameter ID |
0x26 (Circuit State Indicator) |
Release (REL) for Protocol Error |
||
0x03 |
Information Length |
0x26 |
0x0B |
Message ID |
0x0C (REL) |
0x0C |
Parameter Count |
0x01 |
0x0D |
Parameter 1 ID |
0x12 (Cause Indicators) |
0x0E |
Parameter 1 Data Length |
0x02 |
0x0F |
Parameter 1 Data[0] |
0x80 (Location=User) |
0x10 |
Parameter 1 Data[1] |
0xEF (Cause 111=Protocol Error, Unspecified) |
ISUP CQS PPL Event Indications (ITU)
Event ID |
Event |
---|---|
0x02 |
CQR Indication |
0x03 |
Timer T28 Expiration |
ISUP CQS PPL Timers (ITU)
Timer ID |
Timer |
Default Value (10ms) |
---|---|---|
0x01 |
T28 |
1000 |
ISUP CQS Configuration Bytes (ANSI)
Byte |
Description |
Value |
---|---|---|
0x01 |
Max Range |
31 |
0x02 |
Recovery Action (as defined by ANSI T1.113) should be taken if this byte is set to 0x01. |
0x00=Do Not Perform Auto-Recovery 0x01=Perform Auto-Recovery |
0x03 |
Circuit State Indicator Parameter ID |
0x26 (Circuit State Indicator) |
Release (REL) for Protocol Error |
||
0x0A |
Information Length |
0x06 |
0x0B |
Message ID |
0x0C (REL) |
0x0C |
Parameter Count |
0x01 |
0x0D |
Parameter 1 ID |
0x12 (Cause Indicators) |
0x0E |
Parameter 1 Data Length |
0x02 |
0x0F |
Parameter 1 Data[0] |
0x80 (Location=User) |
0x10 |
Parameter 1 Data[1] |
0xEF (Cause 111=Protocol Error, Unspecified) |