You are here: CSP Developer’s Guide: Common Channel Signaling > 7 SS7 PPL Information > L3 BT IUP CPC (0x0052)
Purpose
This section includes PPL Config Bytes, Event Requests and Timer information for the PPL Component L3 BT IUP CPC, a variant of TUP CPC.
L3 BT IUP CPC Configuration Bytes
|
Byte |
Definition |
Value |
|
0x01 |
Network Configuration Bit Number Description |
0=Controlled Network (default) 1=Controlling Network |
|
0x02 |
Confusion Message Qualifier value Whenever CPC sends the Confusion message this byte will be used to setup the message qualifier byte. |
0 (default) |
|
0x03 |
Incoming Congestion Control. |
0=Enabled (default) 1=Disabled |
|
0x04 |
Release Procedures |
0 = Both way Procedures 1 = Disabled |
|
0x05 |
Unidirectional Customer Location (i.e. Outgoing Network Location) Used for Idle Release Procedures |
0 = Other End 1 = This End |
|
0x06 |
Bearer Release Outgoing Initiated, Subsequent to sending the third release processing procedure |
0 =Assume Circuit is Blocked 1 = Repeatedly send a Release upon expiry of TO-12 2 = Assume circuit is Idle, ready to accept another call. |
L3 BT IUP CPC PPL Event Indications
|
Event ID |
Event |
|---|---|
|
0x01F5 |
Invalid IFAM message received from the Network |
|
0x01F6 |
Invalid SAM message received from the Network |
|
0x01F7 |
Invalid FAM message received from the Network |
|
0x01F8 |
Invalid IAM message received from the Network |
|
0x01F9 |
Invalid ASUI message received from the Network |
|
0x01FA |
Invalid SND message received from the Network |
|
0x01FB |
Invalid SAD message received from the Network |
|
0x01FC |
Invalid SASUI message received from the Network |
|
0x01FD |
Invalid ACM message received from the Network |
|
0x01FE |
Invalid CNG message received from the Network |
|
0x01FF |
Invalid CNA message received from the Network |
|
0x0200 |
Invalid RAM message received from the Network |
|
0x0201 |
Invalid ANS message received from the Network |
|
0x0202 |
Invalid CLR message received from the Network |
|
0x0203 |
Invalid REL message received from the Network |
|
0x0204 |
Invalid CCF message received from the Network |
|
0x0205 |
Invalid BLO message received from the Network |
|
0x0206 |
Invalid UBL message received from the Network |
|
0x0207 |
Invalid BLA message received from the Network |
|
0x0208 |
Invalid UBA message received from the Network |
|
0x0209 |
Invalid CFN message received from the Network |
|
0x020A |
Invalid ACI message received from the Network |
|
0x020B |
Invalid SEM message received from the Network |
|
0x020C |
Invalid TLV Length |
|
0x020D |
Invalid Number of TLVs |
|
0x020E |
Glare Indication Caused by IAM |
|
0x020F |
Glare Indication Caused by IFAM |
|
0x0210 |
Invalid SOO message received from the Network |
|
0x0212 |
Invalid SER message received from the Network |
|
0x0213 |
Invalid SIM message received from the Network |
|
0x0214 |
Invalid OOR message received from the Network |
|
0x0215 |
Invalid HLR message received from the Network |
|
0x0216 |
Invalid SSM message received from the Network |
|
0x0217 |
Invalid CFC message received from the Network |
|
0x0218 |
Invalid ECM message received from the Network |
|
0x0219 |
Invalid OLM message received from the Network |
|
0x021A |
Invalid SUS message received from the Network |
|
0x021B |
Invalid RES message received from the Network |
|
0x021C |
Invalid SWAP message received from the Network |
|
0x021D |
Non-receipt of CFC or BLO has occurred |
|
0x021E |
Invalid RAN message received from the Network |
|
0x021F |
Invalid TCM message received from the Network |
L3 BT IUP CPC PPL Timers
|
Timer ID |
Timer |
Default Value (10 ms) |
|---|---|---|
|
0x08 |
TO-8 |
300 |
|
0x0A |
TO-10 |
250 |
|
0x0C |
TO-12 |
250 |