You are here: CSP Developer’s Guide: Common Channel Signaling > 7 SS7 PPL Information > L3P CIC (0x000F)
Purpose
This section includes ITU and ANSI PPL Config Bytes, all PPL Events, and Timer information for the PPL Component L3P CIC.
L3P CIC Configuration Bytes (ITU)
The table below shows the ITU PPL Configuration Byte values for the L3P CIC component. See Important ISUP PPL Information for an explanation of config byte mapping for L3P CIC.
You can modify the parameters for Config Bytes 1-7, but you cannot move them to other byte locations. Other functions in the system access these parameters.
Block 1
Byte |
Description |
Value |
---|---|---|
0x01 |
Index to CGB/CGU parameters |
0x0F |
0x02 |
Index to Hardware CGB/CGU parameters |
0x19 |
0x03 |
Index to GRS parameters |
0x22 |
0x04 |
Called Party Nature of Address Indicator |
0x03 (Subscriber Number) |
0x05 |
Called Party Numbering Plan |
0x10 (Private Numbering Plan) |
0x06 |
Calling Party Nature of Address Indicator |
0x00 (Subscriber Number) |
0x07 |
Calling Party: Numbering Plan Address Presentation Restriction Indicator Screening Indicator (SI) |
0x15 (Private Numbering Plan, Presentation Restricted, User Provided/Screening Passed) |
0x08 |
Request For Service With Data format |
0x00=Raw ISUP (default) 0x01=BCD digits |
0x09 |
Incoming Call Processing Option |
0x00=ACN/ANM (default) 0x01=CON |
0x0A |
CIC Out of Service/In Service Transition Flag |
0x00=OOS Send BLO, INS Send UBL (default) 0x01=OOS No Action, INS Send RSC 0x02=No Action (default for Exchange Type A) |
0x0B |
State Transitions Operation Flag |
0x00=Group Operations (default) 0x01=Individual Operations |
0x0C |
Outgoing Congestion Control |
0x00=Disable 0x02=Enable (default) |
Miscellaneous Configuration |
||
0x0D
|
Misc. Config Byte: Send UPT automatically upon UPU from MTP |
00=Do not send UPT 01=Send UPT automatically |
0x0E |
Host Indication Flag |
0x00=Do Not Send PPL Event to Host 0x01=Send PPL Event to Host (default) |
Circuit Group Blocking/Circuit Group Unblocking (CGB/CGU) (Maintenance) |
||
0x0F |
Information Length |
0x07 |
0x10 |
Message ID |
0x00 (CGB/CGU) |
0x11 |
Number of Parameters |
0x02 |
0x12 |
Parameter 1 ID |
0x15 (C.G.S.M.T. Indicator) |
0x13 |
Parameter 1 Data Length |
0x01 |
0x14 |
Parameter 1 Data [0] |
0x00 (Block with Immediate Release) |
0x15 |
Parameter 2 ID |
0x16 (Range & Status) |
0x16 |
Parameter 2 Data Length |
0x00 |
0x17–0x18 |
Unused |
0x00 |
Circuit Group Blocking/Circuit Group Unblocking (CGB/CGU) (Hardware) |
||
0x19 |
Information Length |
0x07 |
0x1A |
Message ID |
0x00 (CGB/CGU) |
0x1B |
Number of Parameters |
0x02 |
0x1C |
Parameter 1 ID |
0x15 (C.G.S.M.T. Indicator) |
0x1D |
Parameter 1 Data Length |
0x01 |
0x1E |
Hardware Orientation |
0x01 |
0x1F |
Parameter 1 ID |
0x16 (Range & Status) |
0x20 |
Parameter 2 Data Length |
0x00 |
0x21 |
Unused |
0x00 |
Circuit Group Reset (GRS) |
||
0x22 |
Information Length |
0x04 |
0x23 |
Message ID |
0x00 (GRS) |
0x24 |
Number of Parameters |
0x01 |
0x25 |
Parameter 1 ID |
0x16 (Range & Status) |
0x26 |
Parameter 1 Data Length |
0x00 |
0x29 |
PPL Event Indications sent to the host for ACM/ANM. |
0x00* = Send 0x01 = Do not send |
0x2B |
Send RFS to host before incoming Continuity result is received and connect loopback without OOS. In this case, the host should not try to send any other call processing API on the circuit where incoming Continuity Check is being performed, until continuity check results are received in the form of PPL Event Indication. |
0x00 = Send DS0 status change of Channel Out of Service (Loopback) to the host.
|
0x2C |
Unused |
|
0x2D |
Determines whether Outseize ACK message is sent before or after the Address Complete Message (ACM). |
0x00=Sent after ACM 0x01=Sent before ACM |
0x2E |
Determines whether SS7 Address Information is sent to Layer 4. |
0x00=Not sent 0x01=Sent |
0x2F |
Determines whether to re-transmit the Blocking (BLO) message when the RSC is sent to a LO BLO circuit. |
0x00=Re-transmits |
0x30 |
Determines whether the SAM in the RFS feature is enabled. |
0x00=Disabled (default) 0x01=Enabled |
0x31 |
Maximum digits to be collected, excluding the "End of Dialing/digits" signal [i.e., Signal Terminator (ST)] |
Recommended range: 0x00-0x28 (The Digit_Buffer has 80 digit maximum.) |
0x32 |
ST digit value |
0x0F (default) |
0x33-0x36 |
Unused |
|
Address Complete Message (ACM) |
||
0x3C |
Information Length |
0x06 |
0x3D |
Message ID |
0x06 (ACM) |
0x3E |
Number of Parameters |
0x01 |
0x3F |
Parameter 1 ID |
0x11 (Backward Call Indicators) |
0x40 |
Parameter 1 Data Length |
0x02 |
0x41 |
Parameter 1 Data[0] |
0x00 (Charge=No Indicator Called Status=No Indicator Called Count=No Indicator End-End=No Method) |
0x42 |
Parameter 1 Data[1] |
0x04 (Interworking=None Segmentation=None ISUP=All the Way Hold=Not Required Term Access=Non-ISDN Echo=Not Included SCCP Method=No Indicator) |
0x43–0x45 |
Unused |
0x00 |
Answer Message (ANM) |
||
0x46 |
Information Length |
0x02 |
0x47 |
Message ID |
0x09 (ANM) |
0x48 |
Number of Parameters |
0x00 |
0x49–0x4A |
Unused |
0x00 |
Call Progress (CPG) |
||
0x4B |
Information Length |
0x05 |
0x4C |
Message ID |
0x2C (CPG) |
0x4D |
Number of Parameters |
0x01 |
0x4E |
Parameter 1 ID |
0x24 (Event Information) |
0x4F |
Parameter 1 Data Length |
0x01 |
0x50 |
Parameter 1 Data[0] |
0x02 (Progress) |
0x51–0x54 |
Unused |
0x00 |
Connect (CON) |
||
0x55 |
Information Length |
0x06 |
0x56 |
Message ID |
0x07 (CON) |
0x57 |
Number of Parameters |
0x01 |
0x58 |
Parameter 1 ID |
0x11 (Backward Call Indicator) |
0x59 |
Parameter 1 Data Length |
0x02 |
0x5A |
Parameter 1 Data[0] |
0x00 (Charge=No Indicator Called Status=No Indicator Called Count=No Indicator End-End=No Method) |
0x5B |
Parameter 1 Data[1] |
0x14 (Interworking=None Segmentation=None ISUP=All the Way Hold=Not Required Term Access=ISDN Echo=Not Included SCCP Method=No Indicator) |
0x5C–0x5E |
Unused |
0x00 |
Release (REL) |
||
0x5F |
Information Length |
0x06 |
0x60 |
Message ID |
0x0C (REL) |
0x61 |
Number of Parameters |
0x01 |
0x62 |
Parameter 1 Data Type |
0x12 (Cause Indicators) |
0x63 |
Parameter 1 Data Length |
0x02 (Cause Indicators) |
0x64 |
Parameter 1 Data[0] |
0x80 (Location=User) |
0x65 |
Parameter 1 Data[1] |
0X9F (Cause 31=Normal, Unspecified) |
0x66 – 0x6D |
Unused |
0X00 |
Blocking (BLO) |
||
0x6E |
Information Length |
0x02 |
0x6F |
Message ID |
0x13 (BLO) |
0x70 |
Number of Parameters |
0x00 |
0x71– 0x72 |
Unused |
0x00 |
Unblocking (UBL) |
||
0x73 |
Information Length |
0x02 |
0x74 |
Message ID |
0x14 (UBL) |
0x75 |
Number of Parameters |
0x00 |
0x76– 0x81 |
Unused |
0x00 |
Initial Address Message (IAM) |
||
0x82 |
Information Length |
0x0F |
0x83 |
Message ID |
0x01 (IAM) |
0x84 |
Number of Parameters |
0x04 |
0x85 |
Parameter 1 ID |
0x06 (Nature of Connection) |
0x86 |
Parameter 1 Data Length |
0x01 |
0x87 |
Parameter 1 Data[0] |
0x00 (Satellite=None Continuity Check=Not Required Echo=Not Included) |
0x88 |
Parameter 2 ID |
0x07 (Forward Call Indicators) |
0x89 |
Parameter 2 Data Length |
0x02 |
0x8A |
Parameter 2 Data[0] |
0x22 (Call=National End-End=Pass along method available Interworking=None Segmentation=None ISUP=All the Way Preference=ISUP)
|
0x8B |
Parameter 2 Data[1] |
0x00 (Original Access=Non-ISDN SCCP Method=No Indicator Called Number=No Translate QOR=No Attempt) |
0x8C |
Parameter 3 ID |
0x09 (Calling Party Category) |
0x8D |
Parameter 3 Data Length |
0x01 |
0x8E |
Parameter 3 Data[0] |
0x0A |
0x8F |
Parameter 4 ID |
0x02 (Transmission Medium Requirements) |
0x90 |
Parameter 4 Data Length |
0x01=Speech |
0x91 |
Parameter 4 Data[0] |
0x00=Speech |
0x92 Block 1 to 0x44 Block 2 |
Unused or User-Defined |
|
Block 2
The table below shows the config bytes for Block 2.
Byte |
Description |
Value |
---|---|---|
Call Modification Request (CMR) |
||
0x46 |
Information Length |
0x05 |
0x47 |
Message ID |
0x1C (CMR) |
0x48 |
Parameter Counts |
0x01 |
0x49 |
Parameter 1 ID |
0x17 (Call Modification Indicators) |
0x4A |
Parameter 1 Data Length |
0x01 |
0x4B |
Parameter 1 Data[0] |
0x01 |
Call Modification Complete (CMC) |
||
0x50 |
Information Length |
0x05 |
0x51 |
Message ID |
0x1D (CMC) |
0x52 |
Parameter Count |
0x01 |
0x53 |
Parameter 1 ID |
0x17 (Call Modification Indicators) |
0x54 |
Parameter Data Length |
0x01 |
0x55 |
Parameter 1 Data[0] |
0x01 |
Call Modification Reject (CMRJ) |
||
0x5A |
Information Length |
0x05 |
0x5B |
Message ID |
0x1E (CMRJ) |
0x5C |
Parameter Count |
0x01 |
0x5D |
Parameter 1 ID |
0x17 (Call Modification Indicators) |
0x5E |
Parameter 1 Data Length |
0x01 |
0x5F |
Parameter 1 Data[0] |
0x01 |
User Part Test (TPT) |
||
0x64 |
Information Length |
0x06 |
0x65 |
Message ID |
0x34 (UPT) |
0x66 |
Number of Parameters |
0x01 |
0x67 |
Parameter 1 ID |
0x39 (Parameter Compatibility Information) |
0x68 |
Parameter 1 Length |
0x02 |
0x69 |
Parameter 1 Data[0] |
0x39 |
0x6A |
Parameter 1 Data[1] |
0x00 (Not Used) |
Calling Party Clear (CCL) (China ISUP) |
||
0x6E |
Information Length |
0x06 |
0x6F |
Message ID |
0xFC (CCL) |
0x70 |
Number of Parameters |
0x01 |
0x71 |
Parameter 1 ID |
0x38 (Message Compatibility Information) |
0x72 |
Parameter 1 Length |
0x02 |
0x73 |
Parameter 1 Data[0] |
0xFC (Transit Interp, Do Not Release Call, Notify, Discard Message) |
0x74 |
Parameter 1 Data[1] |
0x00 |
Operator (OPR) (China ISUP) |
||
0x78 |
Information Length |
0x06 |
0x79 |
Message ID |
0xFE (OPR) |
0x7A |
Number of Parameters |
0x01 |
0x7B |
Parameter 1 ID (Message Compatibility Information) |
0x38 (Message Compatibility Information) |
0x7C |
Parameter Length |
0x02 |
0x7D |
Parameter Data[0] |
0xFE (Transit Interp, Do Not Release Call, Notify, Discard Message) |
0x7E |
Parameter Data[1] |
0x00 (Not Used) |
Forward Transfer (FOT) |
||
0x82 |
Information Length |
0x02 |
0x83 |
Message ID |
0x08 (FOT) |
0x84 |
Number of Parameters |
0x00 |
Delayed Release (DRS) |
||
0x8C |
Information Length |
0x02 |
0x8D |
Message ID |
0x27 (DRS) |
0x8E |
Number of Parameters |
0x00 |
Meter Pulse Message (MPM) (China ISUP) |
||
0x96 |
Information Length |
0x06 |
0x97 |
Message ID |
0xFD (MPM) |
0x98 |
Number of Parameters |
0x01 |
0x99 |
Parameter 1 ID |
0xFE (Charge Information) |
0x9A |
Parameter 1 Length |
0x02 |
0x9B |
Parameter 1 Data[0] |
0x01 |
0x9C |
Parameter 1 Data[1] |
0x00 |
Block 3
The table below shows the config bytes for Block 3.
Byte |
Description |
Value |
---|---|---|
Circuit Query Message (CQM) |
||
0x01 |
Information Length |
0x04 |
0x02 |
Message ID |
0x00 (CQM) |
0x03 |
Number Of Parameters |
0x01 |
0x04 |
Parameter 1 ID |
0x16 (Range and Status) |
0x05 |
Parameter 1 Data Length |
0x00 |
Facility Request (FAR) |
||
0x0B |
Information Length |
0x05 |
0x0C |
Message ID |
0xIF(FAR) |
0x0D |
Number Of Parameters |
0x01 |
0x0E |
Parameter 1 ID |
0x18 (Facility Indicator) |
0x0F |
Parameter 1 Data Length |
0x01 |
0x10 |
Parameter 1 Data[0] |
0x02 (User-to-User Services) |
Facility Accept (FAA) |
||
0x11 |
Information Length |
0x05 |
0x12 |
Message ID |
0x20 (FAA) |
0x13 |
Number Of Parameters |
0x01 |
0x14 |
Parameter 1 ID |
0x18 (Facility Indicator) |
0x15 |
Parameter 1 Data Length |
0x01 |
0x16 |
Parameter 1 Data[0] |
0x02 (User-to-User Service) |
Facility Reject (FRJ) |
||
0x17 |
Information Length |
0x09 |
0x18 |
Message ID |
0x21 (FRJ) |
0x19 |
Number Of Parameters |
0x02 |
0x1A |
Parameter 1 ID |
0x18 (Facility Indicator) |
0x1B |
Parameter 1 Data Length |
0x01 |
0x1C |
Parameter 1 Data[0] |
0x02 (User-to-User Service) |
0x1D |
Parameter 2 ID |
0x12 (Cause Indicators) |
0x1E |
Parameter 2 Data Length |
0x02 |
0x1F |
Parameter 2 Data [0] |
0x80 (Location=User) |
0x20 |
Parameter 2 Data [1] |
0xC5 (Cause 69=Requested Facility Not Implemented) |
Facility (FAC) |
||
0x21 |
Information Length |
0x02 |
0x22 |
Message ID |
0x33 (FAC) |
0x23 |
Number Of Parameters |
0x00 |
User (USR) |
||
0x24 |
Information Length |
0x06 |
0x25 |
Message ID |
0x2D (USR) |
0x26 |
Number Of Parameters |
0x01 |
0x27 |
Parameter 1 ID |
0x20 (User-to-User Information) |
0x28 |
Parameter 1 Data Length |
0x02 |
0x29 |
Parameter 1 Data[0] |
0xFF (All 1s) |
0x2A |
Parameter 1 Data[1] |
0xFF (All 1s) |
0x2B |
Unused |
|
Network Resource Management (NRM) |
||
0x2C |
Information Length |
0x05 |
0x2D |
Message ID |
0x32 (NRM) |
0x2E |
Number Of Parameters |
0x01 |
0x2F |
Parameter 1 ID |
0x37 (Echo Control Information) |
0x30 |
Parameter 1 Data Length |
0x01 |
0x31 |
Parameter 1 Data |
0x55 (Out Device Not Included/Not Available, In Device Not Included/Not Available, Out Device Activation Request, In Device Activation Request) |
Pass Along Message (PAM) |
||
0x32 |
Information Length |
0x01 |
0x33 |
Message ID |
0x28 (PAM) |
Identification Request (IDR) |
||
0x35 |
Information Length |
0x02 |
0x36 |
Message ID |
0x36 (IDR) |
0x37 |
Number Of Parameters |
0x00 |
Identification Response (IRS) |
||
0x38 |
Information Length |
0x02 |
0x39 |
Message ID |
0x37 (IRS) |
0x3A |
Number Of Parameters |
0x00 |
Information Request (INR) |
||
0x3B |
Information Length |
0x06 |
0x3C |
Message ID |
0x03 (INR) |
0x3D |
Number Of Parameters |
0x01 |
0x3E |
Parameter 1 ID |
0x0E (Information Request Indicator) |
0x3F |
Parameter 1 Data Length |
0x02 |
0x40 |
Parameter 1 Data[0] |
0x01 (Calling Party Address Requested, Holding Not Requested, Calling Party’s Category Not Requested, Charge Information Not Requested) |
0x41 |
Parameter 1 Data[1] |
0x00 (Not Used) |
Information (INF) |
||
0x42 |
Information Length |
0x06 |
0x43 |
Message ID |
0x04 (INF) |
0x44 |
Number Of Parameters |
0x01 |
0x45 |
Parameter 1 ID |
0x0f (Information Indicator) |
0x46 |
Parameter 1 Data Length |
0x02 |
0x47 |
Parameter 1 Data[0] |
0x00 (Calling Party Address Not Included, Hold Not Provided, Calling Party’s Category Not Included, Charge Information Not Included, Solicited) |
0x48 |
Parameter 1 Data[1] |
0x00 (Not used) |
Charge (CRG) |
||
0x49 |
Information Length |
0x02 |
0x4A |
Message ID |
0x31 (CRG) |
0x4B |
Number Of Parameters |
0x00 |
Subsequent Address Message (SAM) |
||
0x4C |
Information Length |
0x06 |
0x4D |
Message ID |
0x02 (SAM) |
0x4E |
Number Of Parameters |
0x01 |
0x4F |
Parameter 1 ID |
0x05 (Subsequent Number) |
0x50 |
Parameter 1 Data Length |
0x02 |
0x51 |
Parameter 1 Data[0] |
0x80 (Odd Number of Address Signals) |
0x52 |
Parameter 2 Data[1] |
0x0F (ST-End of Digits) |
Suspend (SUS) |
||
0x55 |
Information Length |
0x05 |
0x56 |
Message ID |
0x0D (SUS) |
0x57 |
Number Of Parameters |
0x01 |
0x58 |
Parameter 1 ID |
0x22 (Suspend/Resume Indicators) |
0x59 |
Parameter 1 Data Length |
0x01 |
0x5A |
Parameter 1 Data[0] |
0x01 (Network Initiated) |
Resume (RES) |
||
0x5C |
Information Length |
0x05 |
0x5D |
Message ID |
0x0E (RES) |
0x5E |
Number Of Parameters |
0x01 |
0x5F |
Parameter1 ID |
0x22 (Suspend/Resume Indicators) |
0x60 |
Parameter 1 Data Length |
0x01 |
0x61 |
Parameter 1 Data[1] |
0x01 (Network Initiated) |
0x64-0xC8 |
See Table below. |
|
L3P CIC Config Bytes with Offset Values (ITU)
Config Byte Block 3 is used for the config byte range of 400-600, where the offset table resides.
Index |
Message |
Config Byte |
Value |
---|---|---|---|
1 |
Misc. Info |
0x65 |
1 (Offset Block No.) |
|
|
0x66 |
0x01 (Offset Range: 0x01-0x0E) |
2 |
ACM |
0x67 |
1 (Offset Block No.) |
|
|
0x68 |
0x3C (Offset Range: 0x3C-0x42) |
3 |
ANM |
0x69 |
1 (Offset Block No.) |
|
|
0x6A |
0x46 (Offset Range: 0x46-0x48) |
4 |
CPG |
0x6B |
1 (Offset Block No.) |
|
|
0x6C |
0x4B (Offset Range: 0x4B-0x50) |
5 |
CON |
0x6D |
1 (Offset Block No.) |
|
|
0x6E |
0x55 (Offset Range: 0x55-0x5B) |
6 |
REL |
0x6F |
1 (Offset Block No.) |
|
|
0x70 |
0x5F (Offset Range: 0x5F-0x65) |
7 |
BLS |
0x71 |
1 (Offset Block No.) |
|
|
0x72 |
0x6E (Offset Range: 0x6E-0x70) |
8 |
UBL |
0x73 |
1 (Offset Block No.) |
|
|
0x74 |
0x73 (Offset Range: 0x73-0x75) |
9 |
IAM |
0x75 |
1 (Offset Block No.) |
|
|
0x76 |
0x82 (Offset Range: 0x82-0x90) |
10 |
CQM |
0x77 |
3 (Offset Block No.) |
|
|
0x78 |
0x01 (Offset Range: 0x01-0x05) |
11 |
FAR |
0x79 |
3 (Offset Block No.) |
|
|
0x7A |
0x0B (Offset Range: 0X0B-0X10) |
12 |
FAA |
0x7B |
3 (Offset Block No.) |
|
|
0x7C |
0x11 (Offset Range: 0x11-0X16) |
13 |
FRJ |
0x7D |
3 (Offset Block No.) |
|
|
0x7E |
0x17 (Offset Range: 0x17-0x20) |
14 |
FAC |
0x7F |
3 (Offset Block No.) |
|
|
0x80 |
0x21 (Offset Range: 0x21-0x23) |
15 |
USR |
0x81 |
3 (Offset Block No.) |
|
|
0x82 |
0x24 (Offset Range: 0x24--0x2A) |
16 |
NRM |
0x83 |
3 (Offset Block No.) |
|
|
0x84 |
0x2C (Offset Range: 0x2C-0x31) |
17 |
PAM |
0x85 |
3 (Offset Block No.) |
|
|
0x86 |
0x32 (Offset Range: 0x32-0x34) |
18 |
IDR |
0x87 |
3 (Offset Block No.) |
|
|
0x88 |
0x35 (Offset Range: 0x35-0x37)
|
19 |
IRS |
0x89 |
3 (Offset Block No.) |
|
|
0x8A |
0x38 (Offset Range: 0x38-0x3A) |
20 |
INR |
0x8B |
3 (Offset Block No.) |
|
|
0x8C |
0x3B (Offset Range: 0x3B-0x41) |
21 |
INF |
0x8D |
3 (Offset Block No.) |
|
|
0x8E |
0x42 (Offset Range: 0x42-0x48) |
22 |
CRG |
0x8F |
3 (Offset Block No.) |
|
|
0x90 |
0x49 (Offset Range: 0x49-0x4B) |
23 |
SAM |
0x91 |
3 (Offset Block No.) |
|
|
0x92 |
0x4C (Offset Range: 0x4C-0x52) |
24 |
SUS |
0x93 |
3 (Offset Block No.) |
|
|
0x94 |
0x55 (Offset Range: 0x55-0x5A) |
25 |
RES |
0x95 |
3 (Offset Block No.) |
|
|
0x96 |
0x5C (Offset Range: 0x5C-0x61) |
26 |
UPT |
0x97 |
3 (Offset Block No.) |
|
|
0x98 |
0x02 (Offset Range: 0x64-0x6A) |
27 |
CCL |
0x99 |
3 (Offset Block No.) |
|
|
0x9A |
0x02 (Offset Range: 0x6E-0x74) |
28 |
OPR |
0x9B |
3 (Offset Block No.) |
|
|
0x9C |
0x02 (Offset Range: 0x78-0x7E) |
29 |
FOT |
0x9D |
3 (Offset Block No.) |
|
|
0x9E |
0x02 (Offset Range: 0x82-0x84) |
30 |
DRS |
0x9F |
3 (Offset Block No.) |
|
|
0xA0 |
0x02 (Offset Range: 0x8C-0x8E) |
31 |
MPM |
0xA1 |
3 (Offset Block No.) |
|
|
0xA2 |
0x02 (Offset Range: 0x96-0x9C) |
32 |
CMR |
0xA3 |
3 (Offset Block No.) |
|
|
0xA4 |
0x02 (Offset Range: 0x46-0x4B) |
33 |
CMC |
0xA5 |
3 (Offset Block No.) |
|
|
0xA6 |
0x02 (Offset Range: 0x50-0x55) |
34 |
CMRJ |
0xA7 |
3 (Offset Block No.) |
|
|
0xA8 |
0x02 (Offset Range: 0x5A-0x5F) |
35 |
COT |
0xA9 |
3 (Offset Block No.) |
|
|
0xAA |
0x02 (Offset Range: 0x3C-0x3E) |
36 |
LOP |
0xAB |
3 (Offset Block No.) |
|
|
0xAC |
0x02 (Offset Range: 0xAA-0xAC) |
37 |
SGM |
0xAF |
3 (Offset Block No.) |
|
|
0xB0 |
0x02 (Offset Range: 0xB4-0xB6) |
|
: |
: |
--- |
|
: |
--- |
--- |
|
Undefined Message |
0xC7 |
Offset Block N |
|
--- |
0xC8 |
--- |
:
L3P CIC PPL Event Indications (ITU)
The following table shows the PPL Event Indications supported by ITU ISUP L3P CIC.
Event ID |
Event |
---|---|
0x01 |
Reset circuit success indication |
0x08 |
Remote maintenance block or maintenance group block indication |
0x09 |
Remote maintenance unblock or maintenance group unblock indication |
0x0A |
ACM received |
0x0B |
ANM received |
0x0C |
CPG received |
0x0E |
ISUP protocol violation |
0x0F |
Remote hardware group block indication |
0x10 |
Remote hardware group unblock indication |
0x11 |
CON received |
0x12 |
Local maintenance block / group maintenance block success |
0x13 |
Local maintenance unblock / group maintenance unblock success |
0x15 |
Local circuit maintenance unblocking indication |
0x16 |
UCIC received |
0x19 |
OLM received |
0x32 |
SGM message received |
0x5A |
SAM wait timer expired. The Excel platform receives an inbound call (IAM) and checks to see if the Request for Service message in the IAM is enabled (component 0x000F, byte 0x30 is set to 1). If so, the Excel platform checks if the number of maximum digits has been received (set in byte 0x31) and if it is not exceeded the Excel platform looks for the "f" digit in the called party number (or whatever is set in byte 0x32). If the maximum has not been received and the "f" was not included in the called party number the Excel platform starts timer 0x05 (component 0x000F) which is set to four seconds by default (unless changed in the configuration file). Upon expiration of Timer 0x05, this indication is sent to the host and then the RFS message is sent to the host. |
0x63 |
DSP Resource Allocation Failure |
L3P CIC PPL Event Requests (ITU)
The following table shows the PPL Event Requests supported by ITU ISUP L3P CIC.
Event ID |
Event |
---|---|
0x01 |
Send ACM |
0x02 |
Send CPG |
0x03 |
Send ANM |
0x04 |
Request local maintenance blocking (sends BLO) |
0x05 |
Request local maintenance group blocking (sends CGB) |
0x06 |
Request local maintenance unblocking (sends UBL) |
0x07 |
Request local maintenance group unblocking (sends CGU) |
0x08 |
Send GRS |
0x09 |
Send RSC |
0x0A |
Send HW block |
0x0B |
Send HW unblock |
0x0C |
Indicate CPC to wait for incoming COT report when the continuity check is being performed on the previous circuit |
0x0D |
Send incoming continuity check report when the continuity check was performed on the previous circuit. |
0x0E |
Send unrecognized message to the network. It is used for message pass on during MCP handling. NOTE: ICB subtype 0x1F should be used for sending the unrecognized message. DPC/CIC in the ICB should be sent as "00". |
0x1E |
Send CON |
0x1F |
Send CQM |
0x20 |
Send FAR |
0x21 |
Send FAA |
0x22 |
Send FRJ |
0x23 |
Send USR |
0x24 |
Send FAC |
0x25 |
Send PAM |
0x26 |
Send NRM |
0x27 |
Send CRG |
0x28 |
Send IDR |
0x29 |
Send IRS |
0x2A |
Send INR |
0x2B |
Send INF |
0x2D |
Send SUS |
0x2E |
Send RES |
0x32 |
Send SAM |
0x33 |
Reset timer T35 (for inbound SAM) |
0x40 |
Manual Stop (for Continuity re-checking) |
0x41 |
Send Continuity Check Request Message (CCR) |
0x42 |
Send UPT |
0x43 |
Send CCL |
0x44 |
Send OPR |
0x46 |
Send FOT |
0x47 |
Send DRS |
0x49 |
CMC Request with/without Parameters |
0x4A |
CMRJ request with/without Parameters. |
0x4B |
CMR Request with/without Parameters |
0x4C |
Request for COT |
0x4D |
Request for CCR |
0x4E |
Request for LPA |
0x55 |
Loop Prevention |
0x60 |
Send SGM |
L3P CIC PPL Timers (ITU)
Timer Index |
Definition |
Default Duration |
---|---|---|
0x05 |
InterDigit Timer |
4 s (default) |
L3P CIC PPL Configuration Bytes (ANSI)
See Important ISUP PPL Information for an explanation of config byte mapping for L3P CIC.
You can modify the parameters for Config Bytes 1-7, but you cannot move them to other byte locations. Other functions in the system access these parameters.
Block 1
Byte |
Description |
Value |
---|---|---|
0x01 |
Index to CGB/CGU parameters |
0x0F |
0x02 |
Reserved |
0x00 |
0x03 |
Index to GRS parameters |
0x1E |
0x04 |
Called Party Nature of Address Indicator |
0x01 (Subscriber Number) |
0x05 |
Called Party Numbering Plan |
0x50 (Private Numbering Plan) |
0x06 |
Calling Party Nature of Address Indicator |
0x01 (Subscriber Number) |
0x07 |
Calling Party: Numbering Plan Address Presentation Restriction Indicator Screening Indicator (SI) |
0x55 (Private Numbering Plan, Presentation Restricted, User Provided/Screening Passed) |
0x08 |
Request For Service With Data format |
0x00=Raw ISUP (default) 0x01=BCD digit |
0x09 |
Unused |
0x00 |
0x0A |
CIC Out of Service/In Service Transition Flag |
0x00=OOS Send BLO, INS Send UBL (default) 0x01=OOS No Action, INS Send RLC or GRA 0x02=No Action (default for Exchange Type A) |
0x0B |
State Transitions Operation Flag |
0x00=Group Operations (default) 0x01=Individual Operations |
0x0C |
Outgoing Congestion Control |
0x00=Disable 0x02=Enable (default) |
Circuit Validation Test (CVT) |
||
0x0D |
CVT Enable/Disable when UPU Received |
0x00=Disable 0x01=Enable |
0x0E |
Host Indication Flag |
0x00=Do Not Send PPL Event to Host 0x01=Send PPL Event to Host (default) |
Circuit Group Blocking/Circuit Group Unblocking (CGB/CGU) |
||
0x0F |
Information Length |
0x07 |
0x00 |
Message ID |
0x00 (CGB/CGU) |
0x11 |
Number of Parameters |
0x02 |
0x12 |
Parameter 1 ID |
0x15 (C.G.S.M.T. Indicator) |
0x13 |
Parameter 1 Data Length |
0x00 |
0x14 |
Parameter 1 Data[0] |
0x01 (Block with Immediate Release) |
0x15 |
Parameter 2 ID |
0x00 (Range & Status) |
0x16 |
Parameter 2 Data Length |
0x00 |
0x17–0x1D |
Unused |
0x00 |
Circuit Group Reset (GRS) |
||
0x1E |
Information Length |
0x04 |
0x1F |
Message ID |
0x00 (GRS) |
0x20 |
Number of Parameters |
0x01 |
0x21 |
Parameter 1 ID |
0x16 (Range & Status) |
0x22 |
Parameter 1 Data Length |
0x00 |
0x23–0x2A |
Unused |
0x00 |
0x2B |
Send RFS to host before incoming continuity result is received and connect loopback without OOS. In this case, the host should not try to send any other call processing API on the circuit where an incoming continuity check is being performed, until the continuity check results are received in the form of PPL Event Indication. |
0x00 = Send DS0 status change of Channel Out of Service (Loopback) to the host.
|
0x2C-0x31 |
Unused |
0x00 |
Address Complete Message (ACM) |
||
0x32 |
Information Length |
0x06 |
0x33 |
Message ID |
0x06 (ACM) |
0x34 |
Number of Parameters |
0x01 |
0x35 |
Parameter 1 ID |
0x11 (Backward Call Indicators) |
0x36 |
Parameter 1 Data Length |
0x02 |
0x37 |
Parameter 1 Data[0] |
0x00 (Charge=No Indication Called Status=No Indication Called Cat=No Indication End-End=No Method) |
0x38 |
Parameter 1 Data[1] |
0x04 (Interworking=None Segmentation=None ISUP=All the way Hold=Not required Term Access=Non-ISDN Echo=Not included SCCP Method=No Indication) |
0x39–0x40 |
Unused |
0x00 |
Answer Message (ANM) |
||
0x41 |
Information Length |
0x02 |
0x42 |
Message ID |
0x09 (ANM) |
0x43 |
Number of Parameters |
0x00 |
0x44–0x4A |
Unused |
0x00 |
Call Progress (CPG) |
||
0x4B |
Information Length |
0x05 |
0x4C |
Message ID |
0x2C (CPG) |
0x4D |
Number of Parameters |
0x01 |
0x4E |
Parameter 1 ID |
0x24 (Event Information) |
0x4F |
Parameter 1 Data Length |
0x01 |
0x50 |
Parameter 1 Data[0] |
0x02 (Progress) |
0x51–0x59 |
Unused |
0x00 |
Release (REL) |
||
0x5A |
Information Length |
0x06 |
0x5B |
Message ID |
0x0C (REL) |
0x5C |
Number of Parameters |
0x01 |
0x5D |
Parameter 1 ID |
0x12 (Cause Indicators) |
0x5E |
Parameter 1 Data Length |
0x02 |
0x5F |
Parameter 1 Data[0] |
0x80 (Location=User) |
0x60 |
Parameter 1 Data[1] |
0X9F (Cause 31=Normal, Unspecified) |
0x61–0x63 |
Unused |
0x00 |
Blocking (BLO) |
||
0x64 |
Information Length |
0x02 |
0x65 |
Message ID |
0x13 (BLO) |
0x66 |
Number of Parameters |
0x00 |
Unblocking (UBL) |
||
0x6E |
Information Length |
0x02 |
0x6F |
Message ID |
0x14 (UBL) |
0x70 |
Number of Parameters |
0x00 |
0x71–0x77 |
Unused |
0x00 |
Initial Address Message (IAM) |
||
0x78 |
Information Length |
0x21 |
0x79 |
Message ID |
0x01 (IAM) |
0x7A |
Number of Parameters |
0x04 |
0x7B |
Parameter 1 ID |
0x06 (Nature of Connection) |
0x7C |
Parameter 1 Data Length |
0x01 |
0x7D |
Parameter 1 Data[0] |
0x00 (Satellite=None Continuity Check=Not Required Echo=Not Included) |
0x7E |
Parameter 2 ID |
0x07 (Forward Call Indicators) |
0x7F |
Parameter 2 Data Length |
0x02 |
0x80 |
Parameter 2 Data[0] |
0x20 (Call=National End-End=No Method Interworking=None Segmentation=None ISUP=All the Way Preference=ISUP) |
0x81 |
Parameter 2 Data[1] |
0x00 (Original Access=Non-ISDN SCCP Method=No Indication Called Number=No Translate QOR=No Attempt) |
0x82 |
Parameter 3 ID |
0x09 (Calling Party Category) |
0x83 |
Parameter 3 Data Length |
0x01 |
0x84 |
Parameter 3 Data |
0x00 (Unknown) |
Block 2
Byte |
Description |
Value |
---|---|---|
0x85 |
Parameter 4 ID |
0x1D (User Service Information) |
0x86 |
Parameter 4 Data Length |
0x03 |
0x87 |
Parameter 4 Data[0] |
0x80 (Coding Standard=ITU-T Information Transfer=Speech) |
0x88 |
Parameter 4 Data[1] |
0x90 (Transfer Mode=Circuit Rate=64kbls) |
0x89 |
Parameter 4 Data[2] |
0xA2 (User=Layer 1 u-law) |
0x8A–0xCB |
Unused or User-defined |
|
0x01-0xCB |
Unused or User-defined |
|
Information (INF) |
|
|
0x0A |
Information Length |
0x06 |
0x0B |
Message ID |
0x04 (INF) |
0x0C |
Number Of Parameters |
0x01 |
0x0D |
Parameter 1 ID |
0x0f (Information Indicator) |
0x0E |
Parameter Data Length |
0x02 |
0x0F |
Parameter 1 Data[0] |
0x00 Calling Party Address=Not Included Hold=None Calling party Count=Not Included Charge Information=Not Included Information=Solicited |
0x10 |
Parameter 1 Data[1] |
0x00 (MC Bus Group=Not Included) |
Pass Along Message (PAM) |
||
0x14 |
Information Length |
0x01 |
0x15 |
Message ID |
0x28 (PAM) |
0x16 |
Number of Parameters |
0x00 |
Block 3
Byte |
Description |
Value |
---|---|---|
Facility (FAC) |
||
0x19 |
Information Length |
0x02 |
0x1A |
Message ID |
0x33 (FAC) |
0x1B |
Number Of Parameters |
0x00 |
Circuit Query Message (CQM) |
||
0x28 |
Information Length |
0x04 |
0x29 |
Message ID |
0x00 (CQM) |
0x2A |
Number Of Parameters |
0x01 |
0x2B |
Parameter 1 ID |
0x16 (Range and Status) |
0x2C |
Parameter 1 Data Length |
0x00 |
Circuit Reservation Message (CRM) |
||
0x32 |
Information Length |
0x05 |
0x33 |
Message ID |
0xEA (CRM) |
0x34 |
Number of Parameters |
0x01 |
0x35 |
Parameter 1 ID |
0x06 (Nature of Connection) |
0x36 |
Parameter 1 Data Length |
0x01 |
0x37 |
Parameter 1 Data [0] |
0x00 (Satellite=None Continuity Check=Not Required Echo=Not Included) |
Circuit Reservation Acknowledgment CRA) |
||
0x3C |
Information Length |
0x02 |
0x3D |
Message ID |
0xE9 (CRA) |
0x3E |
Number of Parameters |
0x00 |
Exit Message (EXM) |
||
0x41 |
Information Length |
0x02 |
0x42 |
Message ID |
0xED (EXM) |
0x43 |
Number of Parameters |
0x00 |
Forward Transfer (FOT) |
||
0x46 |
Information Length |
0x02 |
0x47 |
Message ID |
0x08 (FOT) |
0x48 |
Number of Parameters |
0x00 |
Suspend (SUS) |
||
0x50 |
Information Length |
0x05 |
0x51 |
Message ID |
0x0D (SUS) |
0x52 |
Number Of Parameters |
0x01 |
0x53 |
Parameter 1 ID |
0x22 (Suspend/Resume Indicator) |
0x54 |
Parameter 1 Data Length |
0x01 |
0x55 |
Parameter 1 Data[0] |
0x01 (Network Initiated) |
Resume (RES) |
||
0x5A |
Information Length |
0x05 |
0x5B |
Message ID |
0x0E (RES) |
0x5C |
Number Of Parameters |
0x01 |
0x5D |
Parameter 1 ID |
0x22 (Suspend/Resume Indicator) |
0x5E |
Parameter 1 Data Length |
0x01 |
0x5F |
Parameter 1 Data[0] |
0x01 (Network Initiated) |
Block 3 With Index Table
Config Byte Block 3 is used for the config byte range of 400-600, where the offset table resides
Index |
Message |
Config Byte |
Value |
---|---|---|---|
1 |
Misc. Info |
0x65 |
1 (Offset Block No.) |
|
|
0x66 |
0x01 (Offset Range: 0x01-0x0E) |
2 |
ACM |
0x67 |
1 (Offset Block No.) |
|
|
0x68 |
0x32 (Offset Range: 0x32-0x38) |
3 |
ANM |
0x69 |
1 (Offset Block No.) |
|
|
0x6A |
0x41 (Offset Range: 0x41-0x43) |
4 |
CPG |
0x6B |
1 (Offset Block No.) |
|
|
0x6C |
0x4B (Offset Range: 0x4B-0x50) |
5 |
REL |
0x6D |
1 (Offset Block No.) |
|
|
0x6E |
0x5A (Offset Range: 0x5A-0x60) |
6 |
BLO |
0x6F |
1 (Offset Block No.) |
|
|
0x70 |
0x64F (Offset Range: 0x64-0x66) |
7 |
UBL |
0x71 |
1 (Offset Block No.) |
|
|
0x72 |
0x6E (Offset Range: 0x6E-0x70) |
8 |
IAM |
0x73 |
1 (Offset Block No.) |
|
|
0x74 |
0x78 (Offset Range: 0x78-0x88) |
9 |
CQM |
0x75 |
3 (Offset Block No.) |
|
|
0x76 |
0x28 (Offset Range: 0x28-0x2C) |
10 |
INR |
0x77 |
3 (Offset Block No.) |
|
|
0x78 |
0x01 (Offset Range: 0x01-0x08) |
11 |
INF |
0x79 |
3 (Offset Block No.) |
|
|
0x7A |
0x0A (Offset Range: 0x0A-0x12) |
12 |
PAM |
0x7B |
3 (Offset Block No.) |
|
|
0x7C |
0x14 (Offset Range: 0x14-0X16) |
13 |
FAC |
0x7D |
3 (Offset Block No.) |
|
|
0x7E |
0x19 (Offset Range: 0x19-0x1B) |
14 |
CVT |
0x7F |
3 (Offset Block No.) |
|
|
0x80 |
0x1E (Offset Range: 0x1E-0x20) |
15 |
SUS |
0x81 |
3 (Offset Block No.) |
|
|
0x82 |
0x50 (Offset Range: 0x50--0X55) |
16 |
RES |
0x83 |
3 (Offset Block No.) |
|
|
0x84 |
0x5A (Offset Range: 0x5A-0x5F) |
17 |
CRM |
0x85 |
3 (Offset Block No.) |
|
|
0x86 |
0x03 (Offset Range: 0x32-0x37) |
18 |
CRA |
0x87 |
3 (Offset Block No.) |
|
|
0x88 |
0x03 (Offset Range: 0x3C-0x3E) |
19 |
EXM |
0x89 |
3 (Offset Block No.) |
|
|
0x8A |
0x03 (Offset Range: 0x41-0x44) |
20 |
FOT |
0x8B |
3 (Offset Block No.) |
|
|
0x8C |
0x03 (Offset Range: 0x46-0x48) |
21 |
COT |
0x8D |
3 (Offset Block No.) |
|
|
0x8E |
0x03 (Offset Range: 0x23-0x25) |
22 |
REL |
0x8F |
3 (Offset Block No.) |
|
|
0x90 |
0x01 (Offset Range: 0x96-0x9C) |
L3P CIC PPL Event Indications (ANSI)
Event ID |
Event |
---|---|
0x01 |
Reset circuit success indication |
0x08 |
Remote maintenance block or maintenance group block indication |
0x09 |
Remote maintenance unblock or maintenance group unblock indication |
0x0A |
ACM received |
0x0B |
ANM received |
0x0C |
CPG received |
0x0E |
ISUP protocol violation |
0x12 |
Local maintenance block / group maintenance block success |
0x13 |
Local maintenance unblock / group maintenance unblock success |
0x15 |
Local circuit maintenance unblocking indication |
0x16 |
UCIC received |
0x17 |
No GRS/RSC Received, CICs In Service |
0x26 |
CRM received |
0x63 |
DSP Resource Allocation Failure |
L3P CIC PPL Event Requests (ANSI)
Event ID |
Event |
---|---|
0x01 |
Send ACM |
0x02 |
Send CPG |
0x03 |
Send ANM |
0x04 |
Request local maintenance blocking (sends BLO) |
0x05 |
Request local maintenance group blocking (sends CGB) |
0x06 |
Request local maintenance unblocking (sends UBL) |
0x07 |
Request local maintenance group unblocking (sends CGU) |
0x08 |
Send GRS |
0x09 |
Send RSC |
0x0C |
Indicate CPC to wait for incoming COT report when continuity check is being performed on previous circuit. |
0x0D |
Send incoming continuity check report if continuity check was performed on previous circuit. |
0x1F |
Send CQM |
0x24 |
Send FAC |
0x25 |
Send PAM |
0x2A |
Send INR |
0x2B |
Send INF |
0x2D |
Send SUS |
0x2E |
Send RES |
0x2F |
Send CVT |
0x31 |
IAM Request with parameters |
0x40 |
Manual Stop |
0x41 |
Send Continuity Check Request Message (CCR) |
0x45 |
Send EXM |
0x46 |
Send FOT |
L3P CIC PPL Timers (ANSI)
Timer ID |
Timer |
Default Value (10ms) |
---|---|---|
0x01 |
Wait For SS7 Network Response |
12000 |
0x02 |
Wait For L4 Response |
800 |
0x03 |
Wait For L4 Maintenance Loopback ACK |
500 |