You are here: CSP Developer’s Guide: Common Channel Signaling > 7 SS7 PPL Information > L3P TUP (0x0011)
Purpose
This section includes PPL Config Bytes, all PPL Events, and Timer information for the PPL Component L3P TUP.
L3P TUP Configuration Bytes
Byte |
Description |
Value |
---|---|---|
0x01 |
Answer Type |
0x00=ANC (default) |
0x02 |
CCL Reception Processing Options |
0x00=Auto-reply w/ CBK (default) |
0x03 |
Outgoing Call Release Option |
0x00=CLF (default) |
0x04 |
0x00=BLK/UBL (default) |
|
0x05 |
CBK Reception Processing Options |
0x00=Auto-reply with CLF (default) |
0x06 |
RFS Format |
0x00=TUP Fields (default) |
0x07 |
Send ACM PPL Event to host |
0x00=Do Not Send (default) |
0x08 |
Send Answer PPL Event to host |
0x00=Do Not Send (default) |
0x09 |
Outgoing Congestion Control |
0x00 - Disable 0x01 - Enable (default) |
0x0A |
Enable/Disable PPL Event Indication sending to host. 1=Send PPL Event Indication to host. If this byte is set to "1", all the block/unblock acknowledgments and reset complete indications (RLG) will be sent to the host. |
0x00 NOTE: Config Byte 0x0A is used only for China TUP customized PPLs. |
0x0B |
Send Auto ACM 0=Wait for Host initiated ACM |
0x00 |
0x0C-0x0E |
Unused |
|
0x0F |
Field ID of Called Party Address |
0x03 |
0x10 |
Field ID of Calling Line ID |
0x08 |
0x11 |
Address Indicator for Calling Line ID |
00x0 |
0x12-0x13 |
Unused |
|
Address Complete Message (ACM) |
||
0x14 |
Number of Fields |
0x01 |
0x15 |
ACM Message Indication Fields |
0x0C |
0x16 |
Field Length |
0x01 |
0x17 |
Field Data |
0x00 |
0x18-0x1D |
Unused |
|
General Request Message (GRQ) |
||
0x1E |
Number of Fields |
0x01 |
0x1F |
GRQ Message Indication Fields |
0x0D |
0x20 |
Field Length |
0x01 |
0x21 |
Field Data |
0x00 |
0x22-0x27 |
Unused |
|
Automatic Congestion Control Message (ACC) |
||
0x28 |
Number of Fields |
0x01 |
0x29 |
ACC Message Indication Fields |
0x13 |
0x2A |
Field Length |
0x01 |
0x2B |
When set will cause a REL to be sent to the network prior to transitioning into the In Service Protocol. |
0x00 (default) |
0x2C-0x31 |
Unused |
|
Extended Unsuccessful Backward Setup Information Message (EUM) |
||
0x32 |
Number of Fields |
0x02 |
0x33 |
EUM Octet Indication Fields |
0x14 |
0x34 |
Field Length |
0x01 |
0x35 |
Field Data |
0x01 |
0x36 |
SPC |
0x15 |
0x37 |
Field Length |
0x02 |
0x38 |
Field Data |
0x00 |
0x39 |
Field Data |
0x00 |
0x3A-0x3B |
Unused |
|
Initial Address Message (IAM) |
||
0x3C |
Number of Fields |
0x02 |
0x3D |
Calling Party Category |
0x01 |
0x3E |
Field Length |
0x01 |
0x3F |
Field Data |
0x0A |
0x40 |
Field ID |
0x02 - Call Setup Message Indicators |
0x41 |
Field Length |
0x02 |
0x42 |
Field Data |
0x00 |
0x43 |
Field Data |
0x00 |
0x44-0x4F |
Unused |
|
Initial Address Message with Initial Information (IAI) |
||
0x50 |
Number of Fields |
0x02 |
0x51 |
Calling Party Category |
0x01 |
0x52 |
Field Length |
0x01 |
0x53 |
Field Data |
0x0A |
0x54 |
Field ID |
0x02 - Call Setup Message Indicators |
0x55 |
Field Length |
0x02 |
0x56 |
Field Data |
0x00 |
0x57 |
Field Data |
0x00 |
L3P TUP PPL Event Indications
Event ID |
Event |
---|---|
0x28 |
Received GSM |
0x29 |
Received SAO/SAM |
0x2A |
Received FOT |
0x2B |
Received RAN |
0x2C |
Received CCL |
0x2D |
Received GRQ |
0x2E |
Received ACM |
0x2F |
Received Answer (ANC, ANN, ANU) |
0x30 |
Received Call Unsuccessful after ACM (Congestion) |
0x31 |
Received CBK |
0x32 |
Remotely Maintenance Blocked |
0x33 |
Remotely Hardware Blocked |
0x34 |
Remotely Software Blocked |
0x35 |
Remotely Maintenance Unblocked |
0x36 |
Remotely Hardware Unblocked |
0x37 |
Remotely Software Unblocked |
0x38 |
Local Maintenance Block Request Successfully Completed |
0x39 |
Local Maintenance Block Request Unsuccessful |
0x3A |
Local Maintenance Unblock Request Successfully Completed |
0x3B |
Local Maintenance Unblock Request Unsuccessful |
0x3C |
Local Software Block Request Successfully Completed |
0x3D |
Local Software Block Request Unsuccessful |
0x3E |
Local Software Unblock Request Successfully Completed |
0x3F |
Local Software Unblock Request Unsuccessful |
0x40 |
Local Maintenance Blocking Cleared. |
0x41 |
Local Software Blocking Cleared |
0x43 |
ACC Received |
0x44 |
Layer 5 Group Reset/Reset Request Successful |
0x45 |
Layer 5 Group Reset/Reset Request Unsuccessful |
0x64 |
TUP Protocol Violation |
0x0191 |
Setup Indication (containing ICB data IAM/IAI) |
0x0192 |
Channel Release with ICB data |
0x0193 |
Reset Indication |
0x0194 |
Loopback Indication |
0x0195 |
Loopback Remove Indication |
0x0196 |
Circuit INS Indication |
0x0197 |
Clear Forward Indication |
0x0198 |
Invalid ICB data message discarded |
0x0199 |
Circuit OOS Indication |
0x019A |
Call unsuccessful indication with ICB data (CFL) |
0x019B |
RLG Indication |
0x019C |
Group Reset Indication |
0x019D |
Reset Complete Indication |
0x019E |
Clearback Receive Indication, CLF sent |
0x019F |
Virtual CIC channel status after Matrix Controller switchover |
Outgoing Call Failure reasons are listed below as Event Indications 0x013B-0x0149. These occur before receiving a backward message (equivalent to outseize NACK).
|
|
0x013B |
Outgoing Call rejected, channel blocked |
0x0147 |
Outgoing Call rejected, invalid channel state or an error indication from TUP |
0x0148 |
Outgoing Call rejected, dual seizure |
0x0149 |
Outgoing Call rejected, local circuit reset due to an internal error |
L3P TUP PPL Event Requests
Event ID |
Event |
---|---|
0x01 |
Send ACM |
0x02 |
Send CFL |
0x03 |
Send GRQ |
0x04 |
Send Call Unsuccessful |
0x05 |
Send Answer |
0x06 |
Send CBK |
0x07 |
Send RAN |
0x08 |
Send SAO/SAM |
0x09 |
Send GSM |
0x0A |
Send FOT |
0x0B |
Send CCL |
0x0C |
Send ACC |
0x0D |
Locally Maintenance Block Request (Individual) |
0x0E |
Locally Maintenance Unblock Request (Individual) |
0x0F |
Locally Maintenance Block Request (Group) |
0x10 |
Locally Maintenance Unblock Request (Group) |
0x11 |
Locally Software Block Request (Group) |
0x12 |
Locally Software Unblock Request (Group) |
0x13 |
Circuit Reset Request |
0x14 |
Circuit Group Reset Request |
0x15 |
Hardware Block Request (Group) |
0x16 |
Hardware Unblock Request (Group) |
0x3C |
Send IAM/IAI |
0x3D |
Send Release |
0x3E |
Send Loopback ACK for incoming COT |
0x3F |
Span OOS status |
0x40 |
Span INS status |
L3P TUP PPL Timers
Timer ID |
Timer |
Default Value (10ms) |
---|---|---|
0x01 |
L4 Loopback ACK Wait |
1000 |
0x02 |
L4 Clear Request Wait |
3000 |
0x03 |
TUP Reset Complete Wait |
6000 |
0x04 |
M/SW Block Response Wait |
12000 |
0x05 |
HW Block for OOS Response Wait |
12000 |