You are here: CSP Developer’s Guide: Common Channel Signaling > 7 SS7 PPL Information > MTP3 TLAC (0x003C)
Purpose
This section includes all PPL events and Timer information for the PPL Component MTP3 TLAC.
MTP3 TLAC PPL Event Indications
Event ID |
Event |
---|---|
0x0000 |
Remote processor outage. A single ICB of type Q.752 Parameters is included with the following parameter: 0x0000 Timestamp |
0x0001 |
Remote processor restored. A single ICB of type Q.752 Parameters is included with the following parameter: 0x0000 Timestamp |
0x0002 |
Local inhibit. A single ICB of type Q.752 Parameters is included with the following parameter: 0x0000 Timestamp |
0x0003 |
Local uninhibit. A single ICB of type Q.752 Parameters is included with the following parameter: 0x0000 Time stamp |
0x0004 |
Remote inhibit. A single ICB of type Q.752 Parameters is included with the following parameter: 0x0000 Time stamp |
0x0005 |
Remote uninhibit. A single ICB of type Q.752 Parameters is included with the following parameter: 0x0000 Time stamp |
ITU MTP3 TLAC PPL Timers
Timer ID |
Timer |
Default Value (10 ms) |
---|---|---|
0x01 |
T12 |
100 |
0x02 |
T13 |
100 |
0x03 |
T14 |
250 |
0x04 |
T22 |
18000 |
0x05 |
T23 |
18000 |
MTP3 TLAC PPL Timers (ANSI)
Timer ID |
Timer |
Default Value (10 ms) |
---|---|---|
0x01 |
T12 |
100 |
0x02 |
T13 |
100 |
0x03 |
T14 |
250 |
0x04 |
T20 |
9000 |
0x05 |
T21 |
9000 |