You are here: CSP Developer’s Guide: Common Channel Signaling > 7 SS7 PPL Information > SCCP SCRC (0x0066)
Purpose
This section includes PPL Config Bytes for the PPL Component SCCP SCRC.
SCCP SCRC Configuration Bytes
Byte |
Description |
Value |
0x01 |
SCCP Flow Control=Indicates if SCCP should perform remote SCCP Status Check when routing on GT. |
0x00- No (ANSI default) 0x01=Yes (ITU default) |
0x02 |
Point Code Congestion Status=Indicates if SCCP should check the APC Congestion Status and not send a message to a congested point code. |
0x00- No (ITU default) 0x01=Yes (ANSI default)
|
0x03 |
Supports the GR-246 congestion handling option. When enabled, the CSP routes the message based on the point code congestion level during GTT. |
0x00 = Disabled (default) 0x01 = Enabled |