You are here: CSP Developer’s Guide: Common Channel Signaling > 7 SS7 PPL Information > SCCP SUSI (0x0067)
Purpose
This section includes PPL Config Bytes and all PPL events for the PPL Component SCCP SUSI.
SCCP SUSI Configuration Bytes
|
Byte |
Description |
Value |
|---|---|---|
|
0x01 |
PPL Event Indication format |
0x00=Use RAW CGPA and CDPA format in PPL Event Indication. (default) 0x01=Use CGPA and CDPA Elements format in PPL Event Indication |
|
0x03 |
Maximum length of data to the host in PPL Event Indications |
0xF0 (default) |
|
0x12 |
ICB format for indications
|
0x00 - Data ICB (default) 0x01 - Extended ICB |
|
0x14-0x17 |
Used to store the maximum allowable to the host for ICB length in the SCCP PPL Event Indication. |
0xF0 (default) |
SCCP SUSI PPL Event Indications and Requests (ITU/ANSI)
All the SCCP N-primitives are PPL events to/from PPL component SCCP SUSI.
|
Event ID |
Event |
|---|---|
|
0x01 |
N-UNIT-DATA |
|
0x02 |
N-NOTICE (Indication only) |
|
0x03 |
N-STATE |
|
0x04 |
N-PC-STATE (Indication only) |
|
0x0A |
Maximum size of data to host is exceeded. The following message is truncated. |