L3P BCC (0x92)

You are here: CSP Developer’s Guide: Common Channel Signaling > 13 V5.2 PPL Information > L3P BCC (0x92)

L3P BCC (0x92)

Purpose

L3P BCC uses PPL configuration byte, event, and timer information.

L3P BCC Configuration Bytes

Byte	Description	Values (* Default)
0x01	Send Deallocate Request to L3 upon receiving Channel Remove message from PSTN	* 0x00 = Send Deallocate Request to L3 0x01 = Do not send Deallocate Request
0x02	Number of Allocation Request resends before giving up (send Channel Request reject to PSTN)	*0x00 =Default number of resends
0x03	Reserved
0x04	Reserved
0x05	Override the BCC Channels that are allocated and this can be set only from LE Side.	* 0x00 = Do not override 0x01 = Over

L5/L3 Events

PPL Event Indication (L5 to L3P)
0x0001 Layer 3 AUDIT Request (LE only) 0x0002 Layer 3 AUDIT Complete Indication

L3P BCC PPL Timers

When specifying new timer values, remember that all PPL Timers are specified in 10 ms increments. For example, a PPL timer for 4 seconds is specified as 4000 (decimal, 400 x 10 ms = 4 seconds), which is the hexadecimal value of (0x190).

Timer ID	Description	Value (default)
0x01	Layer 4 Router Response Wait	4 seconds
0x02	Layer 3 Audit Complete Wait	4 seconds
0x03	Layer 3 Audit Complete	4 seconds