You are here: CSP Developer’s Guide: Common Channel Signaling > 13 V5.2 PPL Information > L3P Protection Protocol (0x8E)
L3P Protection Protocol (0x8E)
Purpose
This section describes the PPL timers for L3P Protection Protocol.
L3P Protection Protocol PPL Timers (0x008E)
When specifying new timer values, remember that all PPL Timers are specified in 10 ms increments. For example, a PPL timer for 4 seconds is specified as 4000 (decimal, 400 x 10 ms = 4 seconds), which is the hexadecimal value of (0x190).
|
Timer ID |
Description |
Value (default) |
|---|---|---|
|
0x01 |
Waiting for Switchover |
1.5 seconds |
|
0x02 |
Waiting for Switchover |
1.5 seconds |
|
0x03 |
Waiting for Switchover |
1.5 seconds |
|
0x04 |
Waiting for Reset SN Acknowledge |
20 seconds |
|
0x05 |
Will always expire |
10 seconds |