You are here: CSP Developer’s Guide: Common Channel Signaling > 13 V5.2 PPL Information > L3P PSTN Component (0x8B)
Purpose
This section describes the PPL timers for L3P PSTN Component.
L3P PSTN Component PPL Timers (0x008B)
When specifying new timer values, remember that all PPL Timers are specified in 10 ms increments. For example, a PPL timer for 4 seconds is specified as 4000 (decimal, 400 x 10 ms = 4 seconds), which is the hexadecimal value of (0x190).
|
Timer ID |
Description |
Value (default) |
|---|---|---|
|
0x01 |
Establish Acknowledge Wait |
2 seconds |
|
0x02 |
Establish Acknowledge Wait |
5 seconds |
|
0x03 |
Disconnect Complete Wait |
2 seconds |
|
0x04 |
Status Wait |
2 seconds |
|
0x05 |
Signal or Protocol Parameter |
100 ms |
|
0x06 |
Signal Acknowledge Wait |
10 seconds |
|
0x07 |
Waiting for Disconnect Response |
4 seconds |
|
0x08 |
Waiting for Disconnect Request |
4 seconds |
|
0x09 |
Waiting for Datalink Connection Establish |
4 seconds |