CSP 2110 Fan Tray, Front - Model No. EXSFTL0111

You are here: Excel CSP Hardware Product Descriptions > 1 Chassis > CSP 2110 Fan Tray, Front - Model No. EXSFTL0111

CSP 2110 Fan Tray, Front - Model No. EXS-FTL-0111

Description

The front fan tray and rear fan tray, as shown below, are both required to ensure proper air flow and cooling of the CSP 2110 chassis. The front fan tray is powered by the -48 V DC midplane bus. It can be removed with the power on. The front fan tray provides an air filter to remove particulate accumulation.

Air Filter

The air filter must be replaced periodically to remove particulate accumulation. Preventive maintenance schedules will vary depending on the chassis’s environmental conditions. Refer to the Hardware Installation and Maintenance Guide, for filter removal and replacement procedures.

Configuration Information

The part number, serial number, model number, and revision are located on the back of the fan tray.

Specifications

The front fan tray is designed to the following electrical, physical and environmental specifications.

Electrical	Specification
Input Power Requirement	-48 V DC
Input Voltage Range	-40 V DC to -60 V DC

Physical	Specification
Height	5.7 cm (2.25 in.)
Width	42.5 (16.75 in.)
Depth	31.7 cm (12.5 in.)

Environmental	Specification
Temperature - Storage	-40~C to 70~C (-40~F to 158~F)
Temperature - Operation	0~C to 50~C (32~F to 122~F)
Temperature Shock - Storage	-40~C to 70~C to -40~C (-40~F to 158~F to -40~F) @ 5~C/min.
Temperature Shock - Operation	0~C to 50~C (32~F to 122~F) @ 10~C/min.
Humidity - Operating	5% to 85%
Altitude	Up to 4000 m (13,123 ft.)

Compliance

The CSP 2110 front fan tray complies with all relevant regulations from the following standards organizations and governing bodies.

Country/Standards Organization	Regulations
United States	FCC Part 15 CSA 60950-1-3 FCC Part 68
Canada	ICES 003 CSA 60950-1-3 IC CS03
NEBS	Level 3
European Union	CE Mark
Switzerland	BAKOM
Japan	JATE
Hong Kong	OFTA
Taiwan	DGT