CCS I/O Series 3 Card - Model No. EXS-7IO-1300

Description

The CCS I/O Series 3 card allows you to use one of the following cards in a distributed environment on a CSP:

SS7 Series 3 card

ISDN Series 3 card

IP Signaling Series 3 card

The single slot CCS I/O Series 3 card is paired with one of the above cards to support either a single 10 Base-T or 100 Base-T Ethernet connection, auto-selected.

The Common Channel Signaling card call control at the Server Node matrix communicates with the Matrix Controller Series 3 card on remote nodes over the Ethernet via the CCS I/O Series 3 card. A redundant CCS card connects to the remote matrix through the Ethernet, and to the primary SS7 Series 3 card, ISDN Series 3 card, or IP Signaling Series 3 card through the CCS I/O Series 3 Redundancy Link cable.

The CCS I/O Series 3 Redundancy Link cable serves as an independent link for redundancy between the adjacent CCS I/O Series 3 cards.

Important! Redundant configurations are optional. If selected, the removal of one of a pair of CCS I/O Series 3 cards will not interrupt CCS system operation nor require user intervention.

Placement

The CCS I/O Series 3 card resides in the rear card slot of a CSP 2090, CSP 2110 or CSP 2040 chassis directly behind the corresponding CCS card.

Configuration Information

The part number, serial number, model number, and revision are located on the back of the board.

Specifications

The CCS I/O Series 3 card is designed to the following electrical, physical and environmental specifications.

Electrical

Specification

Supply Voltage, Vcc

5.00V

Supply Current, Vcc @ 5.0V

0.74A (typical)

Physical

Specification

Height

318.5 mm (12.54 in.)

Depth

105.2 mm (4.14 in)

Width

19.7 mm (0.775 in.)

Environmental

Specification

Temperature - Storage

-40~C to 70~C (-40~F to 158~F)

Temperature - Operation

0~C to 50~C (32~F to 122~F)

Temperature Shock - Storage

-40~C to 70~C to -40~C (-40~F to 158~F to -40~F) @ 5~C/min.

Temperature Shock - Operation

0~C to 50~C (32~F to 122~F) @ 10~C/min.

Humidity - Operating

5% to 85%

Altitude

Up to 4000 m (13,123 ft.)

Compliance

The CCS I/O Series 3 card complies with all relevant regulations from the following standards organizations and governing bodies.

Country/Standards Organization

Regulations

United States

FCC Part 15

CSA 60950-1-3

Canada

ICES 003

CSA 60950-1-3

NEBS

Level 3

European Union

CE Mark

Related Products

The products related to the CCS I/O Series 3 card are listed below.

Product

Model No.

SS7 Series 3 Card

EXS-SS7-1360

ISDN Series 3 card

EXS-PRI-1300

IP Call Server card

EXS-SCS-1000

CCS I/O Series 3 Redundancy Link Cable

EXS-CBL-1000

 

Front and Side Views

The front view shows the LEDs, Redundancy Link connector and Ethernet connectors.

Controls and Indicators

The table below describes the LEDs as shown in the front view of the CCS I/O Series 3 card.

LEDs

Color/Status

Description

Power

Green

Power is within acceptable limits.

Off

Power is not available or out of tolerance.

Activity

Green

CCS I/O Series 3 card is active.

Off

CCS I/O Series 3 card is inactive.

Redundancy Link Status

Green

High speed redundant link is active.

Off

High speed redundant link is inactive.

Port A

On (100 Base-T)

S-Speed

On (10 Base-T)

On

L-Link

Off

Blinking Green

A-Activity

Off

Port B (Reserved for future use)

On (100 Base-T)

S-Speed

On (10 Base-T)

On

L-Link

Off

Blinking Green

A-Activity

Off