You are here: Hardware Installation and Maintenance > 3 CSP Chassis Installation > Hardware Requirements
The following table lists the equipment that you must purchase from Excel for the Converged Services Platform (CSP).
|
Excel-Supplied Equipment |
|---|
|
Matrix Controller I/O Series 3 card |
|
System cards and I/O cards |
|
Power Supply card |
|
For multi-node systems: EXNET-ONE card for each node on the ring EXNET Ring Fiber-optic cable |
The following table lists the equipment that you must supply for the Converged Services Platform (CSP).
|
Customer-Supplied Equipment |
|---|
|
A host computer to monitor and control the CSP over an Ethernet connection (10Base-T or 100Base-T), and other associated hardware. Multi-node systems require Ethernet connectivity to the host. |
|
19-inch or 23-inch rack and screws |
|
CSP 2090 and CSP 2110 10 gauge wire (green, blue, and white) CSP 2040 14 gauge wire (green, blue, and white) |
|
#10 solderless crimp ring terminals |
|
#10 solderless crimp fork terminals |
|
External power source: CSP 2090: 20 amps @ -48 V DC CSP 2110: 25 amps @ -48 V DC CSP 2040: 10 amps @ -48 V DC |
|
I/O card cables, including cables for line cards |