Card Types

Overview

The cards used in the CSP (CSP 2090, CSP 2110 and CSP 2040) chassis are listed by card type below.

Important! Refer to each card’s Hardware Product Description for specific illustrations, compliance, LED descriptions, switch settings, jumper settings, model numbers, and part numbers.

Power Supply Cards

These are the currently available Power Supply cards.

• PSC-150 Power card (CSP 2090 and CSP 2110)

• PSC-60 Power card (CSP 2040)

Matrix Controller Cards

These are the currently available Matrix Controller cards.

• Matrix Controller card

• Matrix Controller I/O card

Line Cards

These are the currently available Line cards.

• DS3 card

• DS3 I/O card

• DS3 Standby I/O card

• E-ONE card

• E-ONE 120 Ohm I/O card

• E-ONE 120 Ohm Redundant I/O card

• E-ONE 120 Ohm Standby I/O card

• E-ONE 75 Ohm I/O card

• E-ONE 75 Ohm Redundant I/O card

• E-ONE 75 Ohm Standby I/O card

• J-ONE card

• J-ONE Redundant I/O card

• J-ONE Standby I/O card

• T-ONE card

• T-ONE 100 Ohm I/O card

• T-ONE 100 Ohm Redundant I/O card

• T-ONE 100 Ohm Standby I/O card

Common Channel Signaling (CCS) Cards

These are the currently available CCS cards.

• CCS I/O card

• CCS I/O Series 3 card

• DASS2/DPNSS card

• ISDN PRI card

• ISDN PRI Redundant I/O card

• ISDN Series 3 card (The CCS I/O Series 3 card is the I/O card for this card.)

• SS7 Multi-Protocol I/O card

• SS7 PQ card (The CCS I/O card is the I/O card for this card.)

• SS7 Series 3 card (The CCS I/O Series 3 card is the I/O card for this card.)

Resource Cards

These are the currently available Resource cards.

• DSP-ONE card

• Subrate Controller card

• DSP Series 2 card

EXNET Cards

These are the currently available EXNET cards.

• EXNET-ONE card

• EXNET Connect PCI H.100 card

Internet Protocol (IP) Cards

These are the currently available IP cards.

• IP Signaling Series 3 card (The CCS I/O Series 3 card is the I/O card for this card.)

• VDAC-ONE card

• VDAC I/O card

• IP Network Interface Series 2 card

• Multi-Function Media I/O card

Blockout Cards and Panels

Install blockout cards in unoccupied card slots to improve air flow and cooling. Use blockout cards in any unoccupied slot both in front and rear of the CSP chassis.