0x0009 Address Element TLV

 

Important! In the Address Element TLV, the Resource Attribute Configure message requires either the Expanded Span Channel AIB or the IP Address AIB, but not both. The Address Element Blocks TLV that follows can refer to either the Expanded Span/Channel AIB or to the IP Address AIB.

For Expanded Span/Channel AIB:

Use this TLV to address configuration to a specific channel. If you are changing the attributes of an existing connection, use the Channel address type (0x0D).

Used in:
Resource Attribute Configure message

Byte

Description

0, 1

Tag: Address Element (0x0009)

2, 3

Length: 0x0005

4

Value[0] AIB Type: 0x0D (Expanded Span/Channel)

5

Value[1] AIB Length (0x03)

6

Value[2] Logical Span (MSB)

7

Value[3] Logical Span (LSB)

8

Value[4] Channel


For IP Address AIB:

Use this TLV to address configuration to a specific VoIP module.

Important! This TLV is required for all attribute configuration except for Gateway Mode (Gateway Mode TLV, 0x01D0), which configures an entire IP Network Interface Series 2 card.

If you are pre-configuring the attributes on a VoIP module, use the IP Address type (0x3E).

Used in:

Resource Attribute Configure message

Byte

Description

0, 1

Tag: Address Element (0x0009)

2, 3

Length: 0x0006

4

Value: Data[0] AIB Type: 0x3E (IP Address)

5

Value: Data[1] AIB Length 0x04

6-9

Value: Data[2-5] IP Address (4 bytes)