Use this TLV to specify the remote RTCP port number for the fax relay. This TLV can be set on-the-fly. If this port is not specified by the host during the call setup, per RFC 1889, by default the destination RTCP port is at an offset of 1 from the destination RTP port.
Used in:
0x1E Generic PPL ICB in:
Resource Attribute Configure message
Route Control message
Outseize message
|
Byte |
Description |
|
0, 1 |
Tag 0x01E9 |
|
2, 3 |
Length 0x0002 |
|
4, 5 |
Value[0] RTCP Port |