0x01 Module, IP Address, and Subnet Mask

Use this TLV to configure the IP Address of a VoIP module.

In this TLV block, the module value (Data[0]) must change to reflect the IP address of the VoIP Module assigned. When IP addresses are re-assigned, the TCP/IP stack must be re-initialized. To ensure that the stack is re-initialized properly, you must reboot the board or module, using one of the following TLVs:

• Engage IP (0x02): If the Engage IP TLV is assigned, reset is automatic

• Reset (0x03)

Used in:
IP Address Configure message
IP Address Query message