0x04 Reset Indicator

At any time, the host can send a Reset Configuration message to the card to ensure that the IP address is assigned. The reset indicator value is returned in the Reset Indicator TLV. If the host sends a Reset or Engage TLV, an ACK is returned with all Indicator bits set to 0. If neither the Reset nor the Engage TLV is sent, the bit mask applies.

Used in:
IP Address Configure message

Byte

Description

0

Tag 0x04 Reset Indicator

1

Length 0x04

2

Value[0] 0x00 Reset Indicator , MSB

3

Value[1] Reset Indicator

4

Value[2] Reset Indicator

5

Value[3] Reset Indicator , LSB
(0 = Disable, 1 = Enable)

Bit 0: Main Board

Bit 1: VoIP Module 1

Bit 2: VoIP Module 2

Bit 3: VoIP Module 3

Bit 4: VoIP Module 4

Bit 5: Reserved (0x00)

Bit 6: Reserved (0x00)

Bit 7: Reserved (0x00)