The host can assign Gateway IP addresses the following ways:
• to the main board alone
• to the main board and all modules together
• to individual modules
If the first data byte of the Gateway IP TLV specifies the main board and all modules together (0x05), then the message must have a TLV block for the main board and for each module, specifying their individual IP addresses and subnet masks.
Important! Data byte 0x05 cannot be used in conjunction with 2 module VDAC-ONE or IP Network Interface Series 2 cards. For a two module VDAC-ONE or IP Network Interface Series 2 card, you must assign the gateway address with each individual module IP address.
Used in:
• IP Address Configure message
• IP Address Query message
Byte |
Description |
0 |
Tag 0x05 Gateway IP |
1 |
Length 0x05 |
2 |
Value[0] 0x00 VoIP Module 1 0x01 VoIP Module 2 0x02 VoIP Module 3 0x03 VoIP Module 4 0x05 All Modules, including Main Board |
3-6 |
Value[1-4] IP Address (4 bytes) |