0x05EF Alarm Threshold Configure

Each DSP Series 2 main board can store up to three hours of files in a local cache. Each parameter has a threshold that generates an alarm. The M and N values provide a filter. M samples out of N must exceed the threshold for an alarm to occur. Files are stored in one-second blocks.

This TLV is used in the following messages:

Generic Card Configure

Generic Card Query

VoIP Protocol Configure

VoIP Protocol Query

Byte

Description

0, 1

Tag 0x05EF Alarm Threshold Configure

2, 3

Length 0x0008

4

Value[0] Alarm Number

0 (0x00) Number of Reads

1 (0x01) Total Bytes Read

2 (0x02) Average Read Delay

3 (0x03) Maximum Read Delay

4 (0x04) Number of Writes

5 (0x05) Total Bytes Written

6 (0x06) Average Write Delay

7 (0x07) Maximum Write Delay

8 (0x08) Maximum Simultaneous Files Opened

9 (0x09) Average Simultaneous Files Opened

10 (0x0A) CPU Idle Time

11 (0x0B) VRA Process Delay

12 (0x0C) VRA IO Queue Delay

5

Value[1] Severity

0x00 Minor

0x01 Major

6

Value[2] M Value (Hits in window)

Minimum 1 (0x01)

Maximum 16 (0x10)

Default 3 (0x03)

7

Value[3] N Value (Samples in window) (N >= M)

Minimum 1 (0x01)

Maximum 16 (0x10)

Default 5 (0x05)

8-11

Value[4-7] Threshold Value

(if this is a time value, it is in microseconds)