Use this TLV to assign the active Ethernet Port on a VDAC-ONE card. The upper port is active by default. To activate the lower port, you must send this TLV.
Important! If you enable Ethernet Link Redundancy, the standby Ethernet Port is automatically activated upon failure of the active port.
Used in:
IP Address Configure message
IP Address Query message
|
Byte |
Description |
|
0 |
Tag 0x0A Activate Ethernet Port |
|
1 |
Length 0x04 |
|
2 |
Value[0] 0x00000000 Upper Port Active 0x00000001 Lower Port Active |
Important! The two TLVs above are returned in the response to a successful IP Address Query message.