You are here: CSP Developer’s Guide: Internet Protocols > 3 IP Network Interface Series 2 Card > Routing Examples
Routing Based on Criteria Type, Source IP Address
For routing based on the Criteria Type, Source IP Address, use the Generic PPL TLV in the following format:
ICB Type |
0x03 |
ICB Subtype |
Generic PPL TLV (0x1E) |
ICB Data Length |
0x13 |
Number of TLVs |
0x0003 |
Tag |
Routing Method (0x0013) |
Length |
0x0002 |
Value |
Data[0] 0x00 Criteria Type (MSB) |
Data[1] 0x08 Criteria Type (LSB) |
|
Tag |
Criteria Type (0x0008) |
Length |
0x0002 |
Value |
Data[0] 0x27 (MSB) Source IP Address |
Data[1] 0x92 (LSB) Source IP Address |
|
Tag |
Router Protocol ID (0x000F) |
Length |
0x0001 |
Value |
Data[0] 0x0B |
Routing Based on Criteria Type, Any IP Channel
For routing based on the Criteria Type, Any IP Channel, use the Generic PPL TLV in the following format:
ICB Type |
0x03 |
ICB Subtype |
Generic PPL TLV (0x1E) |
ICB Data Length |
0x13 |
Number of TLVs |
0x0003 |
Tag |
Routing Method (0x0013) |
Length |
0x0002 |
Value |
Data[0] 0x00 Criteria Type (MSB) |
Data[1] 0x08 Criteria Type (LSB) |
|
Tag |
Criteria Type (0x0008) |
Length |
0x0002 |
Value |
Data[0] 0x00 (MSB) Any IP Channel |
Data[1] 0x65 (LSB) Any IP Channel |
|
Tag |
Router Protocol ID (0x000F) |
Length |
0x0001 |
Value |
Data[0] 0x0B |
For routing based on the Route Group ID, use the Generic PPL TLV in the following format:
ICB Type |
0x02 |
ICB Subtype |
Generic PPL TLV (0x1E) |
ICB Data Length |
0x13 |
Number of TLVs |
0x0003 |
Tag |
Routing Method (0x0013) |
Length |
0x0002 |
Value |
Data[0] 0x00 Route Group ID (MSB) |
Data[1] 0x06 Route Group ID (LSB) |
|
Tag |
Route Group ID (0x0006) |
Length |
0x0002 |
Value |
Data[0] (MSB) Route Group ID |
Data[1] (LSB) Route Group ID |
|
Tag |
Router Protocol ID (0x000F) |
Length |
0x0001 |
Value |
Data[0] 0x0B |