You are here: SwitchKit Installation and Maintenance Guide  > A Appendix > Example Configuration File

Example Configuration File

 

The following configuration file provides example code which can be used to configure a CSP.

Remarks

The remarks or lines of code beginning with a pound sign (#) were added to this file after it was generated. The limitations of this page present the code with spaces or carriage returns that you would not see in a Command Prompt window. These spaces or carriage returns do not have any impact on the configuration.

example.cfg

# SSAInternal Messages for use with CSA configuration mode only.

SSAInternalMsg(Node_TypeTable(NodeType=1,requestedNode=1);

SSAInternalMsg(SSACardTable(Node=1,32=115,18=240,17=240,1=21,4=121,5=96,9=24,10=118,11=113,0=25);

 

AllInService();

AllOutOfService();

 

AddLLCNode(Node=1,Matrix1="208.209.43.52",Matrix2="",RequestedNode=0x01,PhysicalNode=0xffffffff,NodeType=0x00,CallControlNode=0x01,Action=0x00);

 

ProductLicenseDownload(Node=1,ICBCount=0x01,ICBData=2:36:16:70:70:66:74:72:65:82:86:90:66:65:76:76:50:48:75);

 

# De-assign all spans

AssignSpan(Node=1,Slot=0xff,Span=0xffff,Offset=0xff);

# E1 Spans Slot 0

AssignSpan(Node=1,Span=30,Slot=0,Offset=0);

AssignSpan(Node=1,Span=31,Slot=0,Offset=1);

AssignSpan(Node=1,Span=32,Slot=0,Offset=2);

AssignSpan(Node=1,Span=33,Slot=0,Offset=3);

AssignSpan(Node=1,Span=34,Slot=0,Offset=4);

AssignSpan(Node=1,Span=35,Slot=0,Offset=5);

AssignSpan(Node=1,Span=36,Slot=0,Offset=6);

AssignSpan(Node=1,Span=37,Slot=0,Offset=7);

# T1 Spans Slot 9

AssignSpan(Node=1,Span=0,Slot=9,Offset=0x0);

AssignSpan(Node=1,Span=1,Slot=9,Offset=0x1);

AssignSpan(Node=1,Span=2,Slot=9,Offset=0x2);

AssignSpan(Node=1,Span=3,Slot=9,Offset=0x3);

AssignSpan(Node=1,Span=4,Slot=9,Offset=0x4);

AssignSpan(Node=1,Span=5,Slot=9,Offset=0x5);

AssignSpan(Node=1,Span=6,Slot=9,Offset=0x6);

AssignSpan(Node=1,Span=7,Slot=9,Offset=0x7);

AssignSpan(Node=1,Span=8,Slot=9,Offset=0x8);

AssignSpan(Node=1,Span=9,Slot=9,Offset=0x9);

# VDAC Spans Slot 5

AssignSpan(Node=1,Span=16,Slot=5,Offset=0x0);

AssignSpan(Node=1,Span=17,Slot=5,Offset=0x1);

AssignSpan(Node=1,Span=18,Slot=5,Offset=0x2);

AssignSpan(Node=1,Span=19,Slot=5,Offset=0x3);

AssignSpan(Node=1,Span=20,Slot=5,Offset=0x4);

 

# Loop Timing. Type (Primary = 1, Secondary = 2)

LoopTimingConfig(Node=1, Slot=0, Offset=0, Type=1, Action=1);

LoopTimingConfig(Node=1, Slot=9, Offset=0, Type=2, Action=1);

 

# T1 Span format 0x52 ESF, B8ZS, Clear Channel

T1SpanConfig(Node=1,Span=0x00,Format1=0x52,Format2=0x06);

T1SpanConfig(Node=1,Span=0x01,Format1=0x52,Format2=0x06);

T1SpanConfig(Node=1,Span=0x02,Format1=0x52,Format2=0x06);

T1SpanConfig(Node=1,Span=0x03,Format1=0x52,Format2=0x06);

T1SpanConfig(Node=1,Span=0x08,Format1=0x52,Format2=0x01);

 

# T1 Span format 0x09 D4, AMI, CAS

T1SpanConfig(Node=1,Span=0x04,Format1=0x09,Format2=0x06);

T1SpanConfig(Node=1,Span=0x05,Format1=0x09,Format2=0x06);

T1SpanConfig(Node=1,Span=0x06,Format1=0x09,Format2=0x06);

T1SpanConfig(Node=1,Span=0x07,Format1=0x09,Format2=0x06);

T1SpanConfig(Node=1,Span=0x09,Format1=0x09,Format2=0x06);

 

# E1 Span format HDB3, Clear Channel

E1SpanConfig(Node=1,Span=30,SARegisters=248,TS16Registers=208,Format=9,LineLength=4);

E1SpanConfig(Node=1,Span=31,SARegisters=248,TS16Registers=208,Format=9,LineLength=4);

E1SpanConfig(Node=1,Span=32,SARegisters=248,TS16Registers=208,Format=9,LineLength=4);

E1SpanConfig(Node=1,Span=33,SARegisters=248,TS16Registers=208,Format=9,LineLength=4);

 

# E1 Span format AMI, CAS

E1SpanConfig(Node=1,Span=34,SARegisters=248,TS16Registers=208,Format=0,LineLength=4);

E1SpanConfig(Node=1,Span=35,SARegisters=248,TS16Registers=208,Format=0,LineLength=4);

E1SpanConfig(Node=1,Span=36,SARegisters=248,TS16Registers=208,Format=0,LineLength=4);

E1SpanConfig(Node=1,Span=37,SARegisters=248,TS16Registers=208,Format=0,LineLength=4);

 

# SS7 ANSI Stack 0 looped back to Stack 1

SS7SignalingStackConfig(Node=1,Slot=0x0b,Stack=0x00,OPC=0x01,NumModules=0x03,Data=1:0:2:0:3:0);

SS7SignalingStackConfig(Node=1,Slot=0x0b,Stack=0x01,OPC=0x02,NumModules=0x03,Data=1:0:2:0:3:0);

 

# SS7 ITU Stack 2 looped back to Stack 3

SS7SignalingStackConfig(Node=1,Slot=0x0b,Stack=0x02,OPC=0x03,NumModules=0x03,Data=1:1:2:1:3:1);

SS7SignalingStackConfig(Node=1,Slot=0x0b,Stack=0x03,OPC=0x04,NumModules=0x03,Data=1:1:2:1:3:1);

 

SS7SignalingLinkSetConfig(Node=1,StackID=0x00,LinkSetID=0x01,APC=0x02);

SS7SignalingLinkSetConfig(Node=1,StackID=0x01,LinkSetID=0x02,APC=0x01);

SS7SignalingLinkSetConfig(Node=1,StackID=0x02,LinkSetID=0x03,APC=0x04);

SS7SignalingLinkSetConfig(Node=1,StackID=0x03,LinkSetID=0x04,APC=0x03);

 

SS7SignalingLinkConfig(Node=1,StackID=0x00,LinkSetID=0x01,LinkID=0x00,Span=0,Channel=0x00,SLC=0x00,DataRate=0x01,ElectricalInterface=0x00);

SS7SignalingLinkConfig(Node=1,StackID=0x01,LinkSetID=0x02,LinkID=0x01,Span=1,Channel=0x00,SLC=0x00,DataRate=0x01,ElectricalInterface=0x00);

SS7SignalingLinkConfig(Node=1,StackID=0x02,LinkSetID=0x03,LinkID=0x02,Span=30,Channel=0x00,SLC=0x02,DataRate=0x01,ElectricalInterface=0x00);

SS7SignalingLinkConfig(Node=1,StackID=0x03,LinkSetID=0x04,LinkID=0x03,Span=31,Channel=0x00,SLC=0x02,DataRate=0x01,ElectricalInterface=0x00);

 

SS7SignalingRouteConfig(Node=1,StackID=0x00,Destination=0x00,RouteID=0x00,DPC=0x02,LinkSetID=0x01,Priority=0x01,CombinedLinkSetRef=0xffff);

SS7SignalingRouteConfig(Node=1,StackID=0x01,Destination=0x01,RouteID=0x01,DPC=0x01,LinkSetID=0x02,Priority=0x01,CombinedLinkSetRef=0xffff);

SS7SignalingRouteConfig(Node=1,StackID=0x02,Destination=0x02,RouteID=0x02,DPC=0x04,LinkSetID=0x03,Priority=0x01,CombinedLinkSetRef=0xffff);

SS7SignalingRouteConfig(Node=1,StackID=0x03,Destination=0x03,RouteID=0x03,DPC=0x03,LinkSetID=0x04,Priority=0x01,CombinedLinkSetRef=0xffff);

 

# SS7 CIC's on T1 spans

SSAInternalMsg(SS7CICConfigGroup(Node=1,StackID=0,BaseCICNumber=0,BaseCICSpan=0,BaseCICChannel=1,NumCICs=23,CallControlUserPart=0,Range=0:0-0:0,NumFreeCICNumsInSpan=0,DPC=2);

SSAInternalMsg(SS7CICConfigGroup(Node=1,StackID=1,BaseCICNumber=0,BaseCICSpan=1,BaseCICChannel=1,NumCICs=23,CallControlUserPart=0,Range=0:0-0:0,NumFreeCICNumsInSpan=0,DPC=1);

SSAInternalMsg(SS7CICConfigGroup(Node=1,StackID=0,BaseCICNumber=24,BaseCICSpan=2,BaseCICChannel=0,NumCICs=24,CallControlUserPart=0,Range=0:0-0:0,NumFreeCICNumsInSpan=0,DPC=2);

SSAInternalMsg(SS7CICConfigGroup(Node=1,StackID=1,BaseCICNumber=24,BaseCICSpan=3,BaseCICChannel=0,NumCICs=24,CallControlUserPart=0,Range=0:0-0:0,NumFreeCICNumsInSpan=0,DPC=1);

SS7CICConfig(Node=1,StackID=0,BaseCICNumber=0,BaseCICSpan=0,BaseCICChannel=1,NumCICs=23,DPC=2,CallControlUserPart=0);

SS7CICConfig(Node=1,StackID=1,BaseCICNumber=0,BaseCICSpan=1,BaseCICChannel=1,NumCICs=23,DPC=1,CallControlUserPart=0);

SS7CICConfig(Node=1,StackID=0,BaseCICNumber=24,BaseCICSpan=2,BaseCICChannel=0,NumCICs=24,DPC=2,CallControlUserPart=0);

SS7CICConfig(Node=1,StackID=1,BaseCICNumber=24,BaseCICSpan=3,BaseCICChannel=0,NumCICs=24,DPC=1,CallControlUserPart=0);

 

# SS7 CIC's on E1 spans

SSAInternalMsg(SS7CICConfigGroup(Node=1,StackID=2,BaseCICNumber=0,BaseCICSpan=0,BaseCICChannel=1,NumCICs=23,CallControlUserPart=0,Range=0:0-0:0,NumFreeCICNumsInSpan=0,DPC=3);

SSAInternalMsg(SS7CICConfigGroup(Node=1,StackID=3,BaseCICNumber=0,BaseCICSpan=1,BaseCICChannel=1,NumCICs=23,CallControlUserPart=0,Range=0:0-0:0,NumFreeCICNumsInSpan=0,DPC=4);

SSAInternalMsg(SS7CICConfigGroup(Node=1,StackID=2,BaseCICNumber=24,BaseCICSpan=2,BaseCICChannel=0,NumCICs=24,CallControlUserPart=0,Range=0:0-0:0,NumFreeCICNumsInSpan=0,DPC=4);

SSAInternalMsg(SS7CICConfigGroup(Node=1,StackID=3,BaseCICNumber=24,BaseCICSpan=3,BaseCICChannel=0,NumCICs=24,CallControlUserPart=0,Range=0:0-0:0,NumFreeCICNumsInSpan=0,DPC=3);

SS7CICConfig(Node=1,StackID=2,BaseCICNumber=60,BaseCICSpan=30,BaseCICChannel=1,NumCICs=29,DPC=4,CallControlUserPart=0);

SS7CICConfig(Node=1,StackID=3,BaseCICNumber=60,BaseCICSpan=31,BaseCICChannel=1,NumCICs=29,DPC=3,CallControlUserPart=0);

SS7CICConfig(Node=1,StackID=2,BaseCICNumber=90,BaseCICSpan=32,BaseCICChannel=0,NumCICs=30,DPC=4,CallControlUserPart=0);

SS7CICConfig(Node=1,StackID=3,BaseCICNumber=90,BaseCICSpan=33,BaseCICChannel=0,NumCICs=30,DPC=3,CallControlUserPart=0);

 

# T1 Instructions

InseizeInstrListConfig(Node=1,Range=9:0-9:23,InstrNum=255,InstrType=0x00,InstrData1=0x00,InstrData2=0x00);

InseizeInstrListConfig(Node=1,Range=9:0-9:23,InstrNum=1,InstrType=0x07,InstrData1=0x00,InstrData2=0x00);

InseizeInstrListConfig(Node=1,Range=9:0-9:23,InstrNum=2,InstrType=0x03,InstrData1=0x01,InstrData2=0x00);

InseizeInstrListConfig(Node=1,Range=9:0-9:23,InstrNum=3,InstrType=0x06,InstrData1=0x00,InstrData2=0x00);

InseizeInstrListConfig(Node=1,Range=9:0-9:23,InstrNum=4,InstrType=0x04,InstrData1=0x00,InstrData2=0x00);

InpulsingParametersConfig(Node=1,Range=9:0-9:23,Stage=0x01,NumDigitStrings=0x01,StageCompleteTimeout=0x3e8,AddrSignallingType=0x01,String1Method=0x01,String1Data=0x04,String2Method=0x00,String2Data=0x00);

TrunkTypeConfig(Node=1,Range=4:0-7:23,TrunkType=0x01);

TrunkTypeConfig(Node=1,Range=5:0-7:23,TrunkType=0x01);

TrunkTypeConfig(Node=1,Range=9:0-9:23,TrunkType=0x03);

StartDialConfig(Node=1,Range=9:0-9:23,StartDialType=0x01,StartDialValue=0x04);

AnswerSuperviseConfig(Node=1,Range=9:0-9:23,AnswerMode=2);

AnswerSuperviseConfig(Node=1,Range=10:0-13:29,AnswerMode=2);

 

# E1 Instructions

InseizeInstrListConfig(Node=1,Range=34:0-37:29,InstrNum=255,InstrType=0,InstrData2=0,instrData1=0);

InseizeInstrListConfig(Node=1,Range=34:0-37:29,InstrNum=1,InstrType=7,instrData1=0 ,InstrData2=0);

InseizeInstrListConfig(Node=1,Range=34:0-37:29,InstrNum=2,InstrType=3,instrData1=1 ,InstrData2=0);

InseizeInstrListConfig(Node=1,Range=34:0-37:29,InstrNum=3,InstrType=3,instrData1=2 ,InstrData2=0);

InseizeInstrListConfig(Node=1,Range=34:0-37:29,InstrNum=4,InstrType=2,instrData1=15,InstrData2=3);

InseizeInstrListConfig(Node=1,Range=34:0-37:29,InstrNum=5,InstrType=3,instrData1=4 ,InstrData2=0);

InseizeInstrListConfig(Node=1,Range=34:0-37:29,InstrNum=6,InstrType=2,instrData1=13,InstrData2=6);

InseizeInstrListConfig(Node=1,Range=34:0-37:29,InstrNum=7,InstrType=6,instrData1=0 ,InstrData2=0);

InseizeInstrListConfig(Node=1,Range=34:0-37:29,InstrNum=8,InstrType=4,instrData1=0 ,InstrData2=0);

InpulsingParametersConfig(Node=1,Range=34:0-37:29,Stage=1,NumDigitStrings=1,StageCompleteTimeout=1000,AddrSignallingType=3,String1Method=5,String2Method=0,String1Data=10,String2Data=0);

InpulsingParametersConfig(Node=1,Range=34:0-37:29,Stage=2,NumDigitStrings=1,StageCompleteTimeout=1000,AddrSignallingType=3,String1Method=5,String2Method=0,String1Data=255,String2Data=0);

InpulsingParametersConfig(Node=1,Range=34:0-37:29,Stage=4,NumDigitStrings=1,StageCompleteTimeout=1000,AddrSignallingType=3,String1Method=5,String2Method=0,String1Data=1,String2Data=0);

AnswerSuperviseConfig(Node=1,Range=30:1-30:30,AnswerMode=2);

AnswerSuperviseConfig(Node=1,Range=31:1-31:30,AnswerMode=2);

AnswerSuperviseConfig(Node=1,Range=32:0-32:30,AnswerMode=2);

AnswerSuperviseConfig(Node=1,Range=33:0-33:30,AnswerMode=2);

AnswerSuperviseConfig(Node=1,Range=34:0-37:29,AnswerMode=2);

 

# DSP Configuration

DSPSIMMConfig(Node=1,Slot=0x01,SIMM=0x01,DSP0Func=0x10,DSP1Func=0x12,DSP2Func=0x14,DSP3Func=0x08,dsp0func=22,dsp1func=24,dsp2func=5,dsp3func=1);

DSPSIMMConfig(Node=1,Slot=0x01,SIMM=0x02,DSP0Func=0x02,DSP1Func=0x02,DSP2Func=0x02,DSP3Func=0x23,dsp0func=1,dsp1func=2,dsp2func=16,dsp3func=35);

DSPSIMMConfig(Node=1,Slot=0x01,SIMM=0x03,DSP0Func=0x01,DSP1Func=0x01,DSP2Func=0x01,DSP3Func=0x01,dsp0func=1,dsp1func=2,dsp2func=18,dsp3func=35);

DSPSIMMConfig(Node=1,Slot=1,Simm=0,dsp0func=28,dsp1func=28,dsp2func=28,dsp3func=28);

RecordedAnnouncement(Node=1,Slot=0x01,SIMM=0x00,ID=0x03,Format=0x00,Encoding=0x01,File="C:\PROGRA~1\EXCEL~1\SWI~1/C__Program_Files_Excel_Switching_Corporation_SwitchKit_cfg_greeting-u.vox",CSAFilename="C:\Program Files\Excel Switching Corporation\SwitchKit\cfg\greeting-u.vox");

 

# VDAC Configuration. SIP & H.323

IPAddressConfig(Node=1,Slot=0x05,DataType=0x00,TLVCount=13,Data=1:9:255:10:10:144:100:255:255:255:0:5:5:255:10:10:144:1:1:9:3:10:10:144:104:255:255:255:0:5:5:3:10:10:144:1:1:9:2:10:10:144:103:255:255:255:0:5:5:2:10:10:144:1:1:9:1:10:10:144:102:255:255:255:0:5:5:1:10:10:144:1:1:9:0:10:10:144:101:255:255:255:0:5:5:0:10:10:144:1:9:4:0:0:0:0:10:4:0:0:0:0:03:00);

VOIPProtocolConfig(Node=1,Slot=4,TLVCount=0x01,Data=1:200:0:1:5);

VOIPProtocolConfig(Node=1,UnknownAIB,TLVCount=17,Data=01:0xC8:00:01:04:0x02:0x64:00:0x08:48:46:48:46:48:46:48:00:0x02:0x62:00:02:0x13:0xc4:0x02:0x65:00:0x0b:76:85:67:69:78:84:45:79:78:80:00:0x02:0x66:00:0x09:48:48:48:48:48:48:48:48:00:0x02:0x67:00:04:0x00:0x00:0x01:0xf4:0x02:0x68:00:04:0x00:0x00:0x01:0xf4:0x02:0x69:00:04:0x00:0x00:0x0f:0xa0:0x02:0x6a:00:01:0x07:0x02:0x6b:00:01:0x0b:0x02:0x72:00:04:0x00:0x00:0x0e:0x10:0x02:0x75:00:01:0x01:0x02:0x79:00:01:0x00:0x02:0x7a:00:01:0x00:0x02:0x70:00:02:0x00:0x01:0x02:0x7b:00:04:0x00:0x00:0x07:0x08:0x02:0x7c:00:04:0x00:0x00:0x01:0x2c);

ResourceAttributeConfig(Node=1,Slot=0x05,DataType=0x00,TLVCount=0x01,Data=1:208:0:1:2);

ResourceAttributeConfig(Node=1,Slot=0x05,DataType=0x00,TLVCount=0x14,Data=0:9:0:6:62:4:208:209:43:56:1:0:0:1:1:1:1:0:1:1:1:2:0:1:0:1:3:0:1:1:1:194:0:1:75:1:195:0:4:0:0:0:150:1:196:0:1:7:1:197:0:1:0:1:198:0:1:1:1:199:0:1:1:1:209:0:1:0:1:210:0:1:0:1:211:0:1:0:1:235:0:4:0:0:0:0:1:225:0:1:1:1:226:0:1:0:1:236:0:4:0:0:0:0:1:223:0:1:0:1:212:0:1:0);

ResourceAttributeConfig(Node=1,Slot=0x05,DataType=0x00,TLVCount=0x14,Data=0:9:0:6:62:4:208:209:43:57:1:0:0:1:1:1:1:0:1:1:1:2:0:1:0:1:3:0:1:1:1:194:0:1:75:1:195:0:4:0:0:0:150:1:196:0:1:7:1:197:0:1:0:1:198:0:1:1:1:199:0:1:1:1:209:0:1:0:1:210:0:1:0:1:211:0:1:0:1:235:0:4:0:0:0:0:1:225:0:1:1:1:226:0:1:0:1:236:0:4:0:0:0:0:1:223:0:1:0:1:212:0:1:0);

ResourceAttributeConfig(Node=1,Slot=0x05,DataType=0x00,TLVCount=0x14,Data=0:9:0:6:62:4:208:209:43:58:1:0:0:1:1:1:1:0:1:1:1:2:0:1:0:1:3:0:1:1:1:194:0:1:75:1:195:0:4:0:0:0:150:1:196:0:1:7:1:197:0:1:0:1:198:0:1:1:1:199:0:1:1:1:209:0:1:0:1:210:0:1:0:1:211:0:1:0:1:235:0:4:0:0:0:0:1:225:0:1:1:1:226:0:1:0:1:236:0:4:0:0:0:0:1:223:0:1:0:1:212:0:1:0);

ResourceAttributeConfig(Node=1,Slot=0x05,DataType=0x00,TLVCount=0x14,Data=0:9:0:6:62:4:208:209:43:59:1:0:0:1:1:1:1:0:1:1:1:2:0:1:0:1:3:0:1:1:1:194:0:1:75:1:195:0:4:0:0:0:150:1:196:0:1:7:1:197:0:1:0:1:198:0:1:1:1:199:0:1:1:1:209:0:1:0:1:210:0:1:0:1:211:0:1:0:1:235:0:4:0:0:0:0:1:225:0:1:1:1:226:0:1:0:1:236:0:4:0:0:0:0:1:223:0:1:0:1:212:0:1:0);

SSAInternalMsg(VOIPRouting(Node=1,Slot=5,Module=5,IP_Address=10.10.144.101-10.10.144.102-10.10.144.103-10.10.144.104-,Range=16,NumberOfChannels=160);

 

PPLConfig(Node=1,Range=16:0-20:31,ComponentID=0x61,Entity=0x01,ConfigData=17:2:0:12:8:8:1:20:0:21:0:22:11:50:3:51:19:52:1:53:6:54:6:55:2:56:0:57:4:58:15:59:1:60:11);

 

PPLTool(Node=1,CfgFile="C:\PROGRAM FILES\EXCEL SWITCHING CORPORATION\SWITCHKIT\CFG\CONFIG_1.CFG");

SSAInternalMsg(IntFileName(CfgFile="C:\PROGRAM FILES\EXCEL SWITCHING CORPORATION\SWITCHKIT\CFG\CONFIG_1.CFG",Node=1,EnableRouteNode1=1);

 

# ISDN Span 8 NI-2 User Side.

DChannelAssign(Node=1,Slot=10,DChannelSpanID=8,DChannel=23,SecondaryDChannelFacility=0x00,DChannelType=0x01,Data=0xff);

ISDNInterfaceConfig(Node=1,Span=0x08,Channel=0x17,Entity=0x01,Data=0:9);

ISDNInterfaceConfig(Node=1,Span=0x08,Channel=0x17,Entity=0x05,Data=0:0);

BChannelConfig(Node=1,Range=8:0-8:22,Entity=0x01,Value=0x01);

 

ClearAllChanGroups();

AssociateChanGroup(Range=0:1-0:23,ChannelGroup="SS7ANSI-OUT");

AssociateChanGroup(Range=1:1-1:23,ChannelGroup="SS7ANSI-IN");

AssociateChanGroup(Range=2:0-2:23,ChannelGroup="SS7ANSI-OUT");

AssociateChanGroup(Range=3:0-3:23,ChannelGroup="SS7ANSI-IN");

AssociateChanGroup(Range=30:1-30:30,ChannelGroup="SS7ITU-OUT");

AssociateChanGroup(Range=31:1-31:30,ChannelGroup="SS7ITU-IN");

AssociateChanGroup(Range=32:1-32:30,ChannelGroup="SS7ITU-OUT");

AssociateChanGroup(Range=33:1-33:30,ChannelGroup="SS7ITU-IN");

AssociateChanGroup(Range=4:1-7:23,ChannelGroup="E&M");

AssociateChanGroup(Range=8:0-8:22,ChannelGroup="ISDN");

AssociateChanGroup(Range=9:0-9:7,ChannelGroup="FXS-LS");

AssociateChanGroup(Range=16:0-20:31,ChannelGroup="VDAC");

AssociateChanGroup(Range=34:0-37:29,ChannelGroup="E1R2");

 

# 0 - Round Robin

# 1 - Ascending

# 2 - Descending

# 3 - LRU (Least Recently Used) is allocated first

# 4 - MRU (Most Recently Used) is allocated first

ConfigChanGroup(ChannelGroup="SS7ANSI-OUT", Entity=0, Parameter=3);

ConfigChanGroup(ChannelGroup="SS7ANSI-IN", Entity=0, Parameter=3);

ConfigChanGroup(ChannelGroup="SS7ITU-OUT", Entity=0, Parameter=3);

ConfigChanGroup(ChannelGroup="SS7ITU-IN", Entity=0, Parameter=3);

ConfigChanGroup(ChannelGroup="E&M", Entity=0, Parameter=3);

ConfigChanGroup(ChannelGroup="ISDN", Entity=0, Parameter=3);

ConfigChanGroup(ChannelGroup="FXS-LS", Entity=0, Parameter=3);

ConfigChanGroup(ChannelGroup="VDAC", Entity=0, Parameter=3);

ConfigChanGroup(ChannelGroup="E1R2", Entity=0, Parameter=3);