L3P BCC (0x0092) Atomic Functions

You are here: PPL Developer’s Guide > 7 ISDN Atomic Functions > L3P BCC (0x0092) Atomic Functions

This section describes the atomic functions for the L3P BCC PPL component.

L3P BCC Atomic Functions

The following atomic functions are specific to the ISDN L3P BCC component.

AF Number	51
Name	Send L3 ALLOCATION Request
Description	This function sends an Allocation Request to L3
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	52
Name	Send L3 ALLOCATION COMPLETE Request (AN only)
Description	This function sends an Allocation Complete Request to L3 (Allocation Confirm message specifying Allocation Complete)
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	53
Name	Send L3 ALLOCATION REJECT Request (AN only)
Description	This function sends an Allocation Reject Request to L3 (Allocation Confirm message specifying Allocation Reject)
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	54
Name	Send L3 DEALLOCATION Request
Description	This function sends a Deallocation Request message to L3
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	55
Name	Send L3 DEALLOCATION COMPLETE Request (AN only)
Description	This function sends a Deallocation Complete Request to L3 (Deallocation Confirm message specifying Deallocation Complete)
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	56
Name	Send L3 AUDIT Request (AN only)
Description	This function sends a AUDIT Request to L3
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	57
Name	Send Audit Complete to L3
Description	Sends Audit Complete message to Layer 3
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	58
Name	Test for User Port match in Audit Complete message
Description	Tests for User Port match in the Audit Complete message
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	59
Name	Send Clear Call Request to PSTN
Description	Sends a Clear Call Request to the PSTN
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	60
Name	Send PSTN Channel Request Ack
Description	This function sends a Channel Request Acknowledge message to PSTN
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	61
Name	Send PSTN Channel Request Reject
Description	This function sends a Channel Request Reject message to PSTN
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	62
Name	Send PSTN Channel Remove Ack
Description	This function sends a Channel Remove Acknowledge message to PSTN
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	63
Name	Send PSTN Channel Remove Reject
Description	This function sends a Channel Remove Reject message to PSTN
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	64
Name	Send PSTN Channel Indication Ack
Description	This function sends a Channel Indication Acknowledge message to PSTN
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	65
Name	Send Layer Manager Deferred Link Blocked Acknowledge
Description	Sends a Deferred Link Blocked Acknowledge to Layer Manager
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	66
Name	Send PSTN Channel Indication Reject
Description	This function sends a Channel Indication Reject message to the PSTN
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	68
Name	Send PSTN Channel Allocated Indication
Description	This function sends a Channel Allocated Indication message to PSTN
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	71
Name	Send PSTN Channel Allocation Reject
Description	Sends a Channel Allocation Reject to the PSTN
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	72
Name	Send PSTN a BCC Error Indication <Cause>
Description	Sends PSTN a BCC Error Indication
Arg1	Cause: 1: Userport/Timeslot mismatch 2: Fault Message received from AN 3: Error Indication from Layer 3
Arg2	<Not Used>
Returns	Success or Failure

AF Number	75
Name	Send L4 Router Port Request
Description	This function sends a Port Request message to L4 Router
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	76
Name	Send L4 Router Reserve Port Request (AN only)
Description	This function sends a Reserve Port Request to L4 Router
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	77
Name	Check Status Indication for Reason
Description	Tests the Status Indication from L3 to determine if the reason specifies Audit Required
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	78
Name	Get BCC Reference Number
Description	Retrieves the BCC Reference Number
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	83
Name	Send PPL Event Indication with L4 Router reject status
Description	Tests the value of the reject status from L4 router and sends it to L5
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	84
Name	Send AN Fault Request to L3
Description	Sends a Fault Request to the peer entity; function is valid only on AN end
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	102
Name	Set the timeslot value from L4 incoming buffer
Description	This function sets the timeslot value equal to timeslot given in message from L4
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	104
Name	Set the timeslot value for this user port from V5.2 Timeslot/Userport table
Description	This function gets and sets the timeslot value from the user port ID by looking it up in the V5.2 Timeslots/Userport table
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	105
Name	Test the Error Code TLV in the message from PSTN
Description	This function tests the value of the Error Cause in the Error Code TLV in the incoming message from PSTN
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	106
Name	Test if we are LE
Description	Tests to determine if this V5 ID is LE or not
Arg1	<Not Used>
Arg2	<Not Used>
Returns	If LE: PPL Event INT Event 1 If AN: PPL Event INT Event 0

AF Number	107
Name	Test if we are V5.2
Description	Tests to determine if this V5 ID is V5.2 or not
Arg1	<Not Used>
Arg2	<Not Used>
Returns	If LE: PPL Event INT Event 1 If AN: PPL Event INT Event 0

AF Number	110
Name	Test the Response Status from L4RTR
Description	Tests the value of the Response Status TLV received from L4RTR
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	111
Name	Test the More Response Status from L4RTR
Description	Tests the value of the More Response Status TLV received from L4RTR
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure