L3P MGR (0x0093) Atomic Functions

You are here: PPL Developer’s Guide > 7 ISDN Atomic Functions > L3P MGR (0x0093) Atomic Functions

This section describes the atomic functions for the L3P MGR PPL component.

L3P MGR Atomic Functions

The following atomic functions are specific to the ISDN MGR PPL component.

AF Number	51
Name	Query All Span Status
Description	This function queries All Span Status
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	52
Name	Check whether all spans are alive
Description	This function checks whether all spans are alive
Arg1	<Not Used>
Arg2	<Not Used>
Returns	PPL Int Event 1 = Success; PPL Int Event 0 = Failure

AF Number	53
Name	Update the Layer 3P L Manager Link Status
Description	This function updates the Layer 3P L Manager Link Status
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	54
Name	Configure general for Envelope Function Layer
Description	This function configures general for Envelope Function Layer
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	55
Name	Configure general for LAPV
Description	This function configures general for LAPV
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	56
Name	Configure general for L3
Description	This function configures general for L3
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	57
Name	ConfigureV5 Interface
Description	This function configuresV5 Interface
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	58
Name	Configure User Ports
Description	This function configures User Ports
Arg1	0 = Configure User Ports; 1 = Add User Ports
Arg2	<Not Used>
Returns	Success or Failure

AF Number	59
Name	Set Don’t do General Configuration Global Data Variable
Description	Function sets Don’t do General Configuration Global Data Variable
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	60
Name	Clear Don’t do General Configuration Global Data Variable
Description	Function clears Don’t do General Configuration Global Data Variable
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	61
Name	Check Don’t do General Configuration Global Data Variable
Description	Function checks Don’t do General Configuration Global Data Variable
Arg1	<Not Used>
Arg2	<Not Used>
Returns	PPL Int Event 1 = Set; PPL Int Event 0 = Not Set

AF Number	71
Name	Send Startup Request to System Management
Description	This function sends Startup Request to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	72
Name	Send Startup Event PPL Event Indication to host <Arg1>
Description	This function sends Startup Event PPL Event Indication to host
Arg1	Any one of the following: 1: Startup Layer-2 Activation Fail 2: Startup Variant ID Mismatch 3: Startup Link ID Failed 4: Startup Complete 5: Startup Failed
Arg2	<Not Used>
Returns	Success or Failure

AF Number	73
Name	Send Delete V5 Interface message to System Management
Description	This function sends Delete V5 Interface message to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	74
Name	Send V5 Interface Restart Request to System Management
Description	Sends V5 Interface Restart Request to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	75
Name	Send Restart Event PPL Indication to host <Arg 1>
Description	Sends V5 Interface Restart Request to System Management
Arg1	1 = Restart timer expired, Restart failed; 2 = Restart complete
Arg2	<Not Used>
Returns	Success or Failure

AF Number	76
Name	Send V5 Interface Status to host
Description	Sends V5 Interface Status to host
Arg1	0 = Interface is not up; 1 = Interface ID up
Arg2	<Not Used>
Returns	Success or Failure

AF Number	77
Name	Set the interface State
Description	Sets the interface State
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	78
Name	Print Interface Alive message
Description	Prints Interface Alive message
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	81
Name	Send Link Not in Operation message to System Management
Description	Sends Link Not in Operation message to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	82
Name	Send Blocked Link Indication to System Management
Description	Sends Blocked Link Indication to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	83
Name	Send Deferred Link Block Request to System Management
Description	Sends Deferred Link Block Request to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	84
Name	Send Non-Deferred Link Block Request to System Management
Description	Sends Non-Deferred Link Block Request to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	85
Name	Send Unblock Link Request to System Management
Description	Sends Unblock Link Request to System Management
Arg1	0 = Use the current Link 1 = Use other Link (Useful only with Primary and Secondary links, such as when Primary Link is blocked and Secondary C-Channel is active. For switchover when the current link is Secondary, this option sends a Link Unblock message to the Primary link.
Arg2	<Not Used>
Returns	Success or Failure

AF Number	86
Name	Send Link in Operation message to System Management
Description	Sends Link in Operation message to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	87
Name	Send Add Link Request to System Management
Description	Sends Add Link Request to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	88
Name	Send Delete Link Request to System Management
Description	Sends Delete Link Request to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	89
Name	Send Block Indication to System Management from timer expiry
Description	Sends Block Indication to System Management from timer expiry
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	90
Name	Send Link MDU PPL Event Indication to host <Arg1>
Description	Sends Link MDU PPL Event Indication to host
Arg1	Any one of the following: 1 Link operational 2 Link not operational 3 Link ID Required 4 Link ID Request 5 Link ID Release Indication 6 Link ID Reject Indication 7 Link ID Failure 8 Link Block Indication 9 Link Unblock Indication 10 Link Unblock Request 11 Link Deferred Block Request 12 Link No-deferred Block Request
Arg2	<Not Used>
Returns	Success or Failure

AF Number	91
Name	Send Data Link Release Event PPL Event Indication to host <Arg1>
Description	This function sends Data Link Release Event PPL Event Indication to host
Arg1	Any one of the following: 1: Data link release received, autonomous switchover initiated 2: Datalink down Indication, standby not configured 3: Data link release received, autonomous switchover to be initiated on getting control protocol DL release 4: BCC DL release, audit connection requested.
Arg2	<Not Used>
Returns	Success or Failure

AF Number	92
Name	Send Link Status to host
Description	Sends Link Status to host
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	93
Name	Send Layer 3P PSTN Link Blocked Request
Description	Sends Layer 3P PSTN Link Blocked Request
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	94
Name	Send Link Down message to Layer 3P PSTN
Description	Sends Link Down message to Layer 3P PSTN
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	95
Name	Send Deferred Link Block Request to Layer 3P PSTN
Description	Sends Deferred Link Block Request to Layer 3P PSTN
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	96
Name	Send Non-Deferred Link Block Request to Layer 3P PSTN
Description	Sends Non-Deferred Link Block Request to Layer 3P PSTN
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	97
Name	Send User Port message to Layer 3P PSTN
Description	Sends User Port message to Layer 3P PSTN
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	99
Name	Send Channel Status to Layer 4 for all timeslots
Description	Sends Channel Status to Layer 4 for all timeslots
Arg1	0 = Channel Out Of Service 1 = Channel In Service 2 = Channel Blocked 3 = Clear Channel
Arg2	<Not Used>
Returns	Success or Failure

AF Number	100
Name	Set Link Status
Description	Sets Link Status
Arg1	Value
Arg2	Bit Mask
Returns	Success or Failure

AF Number	101
Name	Return C Channel Status to Link
Description	Returns C Channel Status to Links
Arg1	Value
Arg2	Bit Mask
Returns	Success or Failure

AF Number	102
Name	Check Primary or Secondary Link Up
Description	Checks Primary or Secondary Link Up
Arg1	Value
Arg2	Bit Mask
Returns	Success or Failure

AF Number	103
Name	Test Link Status
Description	Tests Link Status
Arg1	Bit Mask
Arg2	<Not Used>
Returns	Success or Failure

AF Number	104
Name	Send all configured links status to System Management
Description	Sends all configured links status to System Management
Arg1	0 = Block only locally-blocked Links 1 = Unblock Unblocked Links
Arg2	Bit Mask
Returns	Success or Failure

AF Number	105
Name	Send MPH AIs to System Management
Description	Sends MPH AIs to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	111
Name	Check whether other C Channel is active
Description	Checks whether other C Channel is active (other than the channel that is currently active)
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	112
Name	Send C Channel Status to host
Description	Sends C Channel Status to host
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	113
Name	Send Accelerated Port Alignment Request to System Management
Description	Sends Accelerated Port Alignment Request to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	114
Name	Send User Port Block Request to System Management
Description	Sends User Port Block Request to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	115
Name	Send User Port Unblock Request to System Management
Description	Sends User Port Unblock Request to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	116
Name	Send User Port Block Indication to System Management
Description	Sends User Port Block Indication to System Management
Arg1	0 = Send Block Indication 1 = Send Don’t Locally block Indication
Arg2	<Not Used>
Returns	Success or Failure

AF Number	117
Name	Send Delete User Port message to System Management
Description	Sends Delete User Port message to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	118
Name	Send User Port Status Request to System Management
Description	Sends User Port Status Request to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	119
Name	Send MPH PPL Event Indication to host <Arg1>
Description	Sends MPH PPL Event Indication to host
Arg1	Any one of the following: 1 Port Unblock Request 2 Port Block Indication 3 Port Unblock Indication 4 Port Block Request 5 ISDN-PRI AN Maintenance 6 ISDN-PRI AN Maintenance 7 ISDN-PRI AN Maintenance 8 ISDN-PRI AN Maintenance 9 ISDN-PRI AN Maintenance 10 ISDN-PRI AN Maintenance 11 ISDN-PRI AN Maintenance 12 ISDN-block D-channel from user 13 ISDN Unblock D-channel 14 User Failure Indication from Userport 15 Network failure indication 16 Access Activated 17 Access Deactivated 18 Grading Information 19 Reception of FE2 20 DS Active 21 Indication of DL Failure 22 Indication of LOS/LFA 23 Reception of FE101 24 Reception of FE105 25 Unsuccessful Activation Attempt 26 Access Activation by User
Arg2	<Not Used>
Returns	Success or Failure

AF Number	120
Name	Send Userport Status to host
Description	Sends Userport Status to host
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	121
Name	Send Port Error PPL Event Indication to host <Arg 1>
Description	Sends Port Error PPL Event Indication to host
Arg1	1 = Port FSM received an invalid Event
Arg2	<Not Used>
Returns	Success or Failure

AF Number	122
Name	Test whether call is active on the Userport
Description	Tests whether call is active on the Userport or not
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	123
Name	Send Block Indications to System Management for the ports that are locally blocked
Description	Sends Block Indications to System Management for the ports that are locally blocked
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	124
Name	Send Unblock Request to System Management for all ports, then send Block Indications to ports that are locally blocked
Description	Sends Unblock Request to System Management for all ports, then send Block Indications to ports that are locally blocked
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	131
Name	Send Switchover Request to System Management
Description	Sends Switchover Request to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	132
Name	Send Switchover Complete message to System Management
Description	Sends Switchover Complete message to System Management
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	133
Name	Send Switchover Event PPL Indication to host <Arg 1>
Description	Sends Switchover Event PPL Indication to host
Arg1	Any of these: 1 = Layer Manager to perform Envelope function layer SAP config. 2 = Switchover reject received 3 = Switchover completed 4 = Switchover failed
Arg2	<Not Used>
Returns	Success or Failure

AF Number	134
Name	Send Reconfigure to Ev Layer for Switchover
Description	Sends Reconfigure to Ev Layer for Switchover
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	135
Name	Straighten out Ev SAPs
Description	Straightens out Ev SAPs
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	136
Name	Test whether Ev crossed
Description	Tests whether Ev crossed
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	137
Name	Toggle Ev SAPs
Description	Toggles Ev SAPs
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	138
Name	Check for reasons for switchover fail
Description	Checks for reasons for switchover fail. Returns 0 (indicating failure) in any of these cases: Both C-Channels are Dead Both C-Channels are blocked One C-Channel is Dead and the other is blocked
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	141
Name	Send Statistics Error PPL Event Indication to host <Arg 1>
Description	Sends Statistics Error PPL Event Indication to host <Arg 1>
Arg1	1 = Invalid Entity, Instance 2 = Invalid Port ID
Arg2	<Not Used>
Returns	PPL Int Event 1 (Success); PPL Int Event 0 (Failure)

AF Number	142
Name	Send Statistics request to lower layers
Description	Sends Statistics request to lower layers (System Management, Envelope layer, or LAPV)
Arg1	1 = Invalid Entity, Instance 2 = Invalid Port ID
Arg2	<Not Used>
Returns	Success or Failure

AF Number	143
Name	Send Statistics data to host
Description	Sends Statistics data to host
Arg1	0 = Vf Layer Statistics 1 = Ev layer Statistics 2 = LAPV Statistics
Arg2	<Not Used>
Returns	Success or Failure

AF Number	146
Name	Send Status Indication to Layer 3P BCC
Description	Sends Status Indication to Layer 3P BCC
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	147
Name	Send Status Error PPL Event Indication to host <arg1>
Description	This function sends Status Error PPL Event Indication to host
Arg1	Any of the following: 1 Invalid entity and Instance 2 Invalid Interface Number 3 Invalid port type 4 Invalid port ID 5 Invalid Link number
Arg2	<Not Used>
Returns	Success or Failure

AF Number	149
Name	Process the LAPV Status Indication
Description	Processes the LAPV Status Indication
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	151
Name	Set HDLC Driver Action
Description	Sets HDLC Driver Action
Arg1	0 = Disable 1 = Enable 2 = Disable All
Arg2	<Not Used>
Returns	Success or Failure

AF Number	152
Name	Disable HDLC Driver for blocked or dead C Channels
Description	Disables HDLC Driver for blocked or dead C Channels
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	153
Name	V5 MGR test whether V5 Subscriber ID exists
Description	Tests whether V5 Subscriber ID exists
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	154
Name	V5 MGR send PPL Event Indication to Layer 5 with V5 Subscriber ID
Description	Sends PPL Event Indication to Layer 5 with V5 Subscriber ID
Arg1	Ev Indication
Arg2	<Not Used>
Returns	Success or Failure

AF Number	155
Name	V5 MGR send PPL Event Indication to Layer 5 with no ICB
Description	V5 MGR sends PPL Event Indication to Layer 5 with no ICB
Arg1	Event Indication Number
Arg2	<Not Used>
Returns	Success or Failure

AF Number	161
Name	Send Management Port PPL Event Indication to host <Arg 1>
Description	Sends Management Port PPL Event Indication to host
Arg1	1 = Event out of sequence 2 = Saved Event already reached limit 3 = Timer T2 expired twice
Arg2	<Not Used>
Returns	Success or Failure

AF Number	162
Name	Send Management Common PPL Event Indication to host <Arg 1>
Description	Sends Management Common PPL Event Indication to host
Arg1	1 = Event out of sequence 2 = Saved Event already reached limit 3 = Timer T2 expired twice
Arg2	<Not Used>
Returns	Success or Failure

AF Number	163
Name	Send Event Message Decode PPL Indication to host <Arg 1>
Description	Sends Event Message Decode PPL Event Indication to host
Arg1	1 = Message Decoding Error 2 = Invalid message 3 = Invalid message length 4 = Protocol discriminator error 5 = Layer 3 address error 6 = Invalid message type 7 = Invalid message content 8 = Invalid optional IE
Arg2	<Not Used>
Returns	Success or Failure

AF Number	164
Name	Send Control Request OK PPL Event Indication to host <Arg1>
Description	This function sends Control Request OK PPL Event Indication to host
Arg1	Any one of the following: 1: All Ports Blocked 2: All Linked Blocked 3: Port/All Port Deleted 4: Interface Deleted 5: Accelerated Port Alignment OK 6: All Links/Link Deleted
Arg2	<Not Used>
Returns	Success or Failure

AF Number	165
Name	Send Config OK PPL Event Indication to host
Description	This function sends Config OK PPL Event Indication to host
Arg1	1: V5 General CFG OK 2: V5 TSAP CFG OK 3: V5 Interface CFG OK 4: V5 Link CFG OK 5: V5 Userport CFG OK
Arg2	<Not Used>
Returns	Success or Failure

AF Number	166
Name	Send Acknowledgment to host in response to PPL Event Request
Description	Sends Acknowledgment to host in response to PPL Event Request
Arg1	0 = Positive Acknowledgment 1 = Invalid Event
Arg2	<Not Used>
Returns	Success or Failure

AF Number	168
Name	Send Layer 4 Primitive Failed PPL Event Indication to host
Description	Sends Layer 4 Primitive Failed PPL Event Indication to host
Arg1	0 = Reasons Available 1 = Reasons Unavailable
Arg2	<Not Used>
Returns	Success or Failure

AF Number	169
Name	Send Status Indication to Layer 3P PSTN
Description	Sends Status Indication to Layer 3P PSTN
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	170
Name	Send Invalid State PPL Event Indication to host <Arg1>
Description	Sends Invalid State PPL Event Indication to host
Arg1	1 = BCC/Protection protocol State event matrix received invalid event
Arg2	<Not Used>
Returns	Success or Failure

AF Number	171
Name	Send UI Event PPL Event Indication to host <Arg1>
Description	Sends UI Event PPL Event Indication to host
Arg1	1 = Layer 4 primitive failed, requested TSAP not found
Arg2	<Not Used>
Returns	Success or Failure

AF Number	172
Name	Send LVT INT Down PPL Event Indication to host <Arg1>
Description	Sends LVT INT Down PPL Event Indication to host
Arg1	1 = Control Protocol TCON Timer expired
Arg2	<Not Used>
Returns	Success or Failure

AF Number	173
Name	Send Common Event PPL Event Indication to host <Arg1>
Description	Sends Common Event PPL Event Indication to host
Arg1	1 = Ready for Reprovisioning 2 = Not ready for reprovisioning 3 = Variant and ID received 4 = Switchover to new variant 5 = Cannot reprovision 6 = Verify reprovisioning 7 = reprovisioning started
Arg2	<Not Used>
Returns	Success or Failure

AF Number	174
Name	Send message Send PPL Event Indication to host <Arg1>
Description	Sends message Send PPL Event Indication to host
Arg1	1 = Message send failure, Invalid protocol FSM State 2 = Protection protocol message send failure, both DLs down
Arg2	<Not Used>
Returns	Success or Failure

AF Number	175
Name	Send message Received PPL Event Indication to host <Arg1>b
Description	Sends message Received PPL Event Indication to host
Arg1	1 = Message received an Invalid protocol FSM State
Arg2	<Not Used>
Returns	Success or Failure

AF Number	176
Name	Send timer expired PPL Event Indication to host <Arg1>
Description	Sends timer expired PPL Event Indication to host
Arg1	1= Secondary expiry of Link control protocol timer
Arg2	<Not Used>
Returns	Success or Failure

AF Number	177
Name	Send L1 FSM PPL Event Indication to host <Arg1>
Description	This function sends L1 FSM PPL Event Indication to host
Arg1	Any one of the following: 1: Layer Manager should issue MPH ID to Layer 1 2: Layer Manager should issue MPH IDR to Layer 1 3: Layer Manager should issue MPH NOR to Layer 1
Arg2	<Not Used>
Returns	Success or Failure

AF Number	178
Name	Send DSFE PPL Event Indication to host <Arg1>
Description	Sends DSFE PPL Event Indication to host
Arg1	Any one of the following: 1: ISDN activate access 2: ISDN deactivate access
Arg2	<Not Used>
Returns	Success or Failure

AF Number	179
Name	Send Timer PPL Event Indication to host <Arg1>
Description	This function sends Timer PPL Event Indication to host
Arg1	Any one of the following: 1: PSTN Timer T3 expiry 2: PSTN Timer T4 expiry
Arg2	<Not Used>
Returns	Success or Failure

AF Number	180
Name	Send Protection Layer PPL Event Indication to host <Arg1>
Description	This function sends Protection Layer PPL Event Indication to host
Arg1	Any one of the following: 1: Reset SN error 2: General protocol error message 3: Notification to layer management of SN misalignment. 4: Reset SN Indication after action on reset SN Request 5: Reset SN acknowledge reception Indication
Arg2	<Not Used>
Returns	Success or Failure

AF Number	181
Name	Send Protocol Error Message PPL Event Indication to host <Arg1>
Description	This function sends Protocol Error Message PPL Event Indication to host
Arg1	1 = BCC Protocol Error message received
Arg2	<Not Used>
Returns	Success or Failure

AF Number	182
Name	Send Configuration Error PPL Event Indication to host <Arg1>
Description	This function sends Configuration Error PPL Event Indication to host
Arg1	Any one of the following: 1 Invalid Entity, Instance 2 Invalid Element Type 3 Configuration already done 4 Cannot Allocate Memory 5 Invalid Interface Number 6 Link Already Present 7 Maximum links already present 8 Invalid Port Type 9 Ports exceed maximum ports 10 Port already present 11 Port insert into hash list failed
Arg2	<Not Used>
Returns	Success or Failure

AF Number	183
Name	Send Control Error PPL Event Indication to host <Arg1>
Description	This function sends Control Error PPL Event Indication to host
Arg1	Any one of the following: 1 Invalid Entity, Instance 2 Invalid Interface number 3 Invalid Element, Type 4 Invalid unsolicited action 5 Invalid trace generation action 6 Invalid sub-action parameter 7 Block port error 8 Delete port error 9 Delete interface error 10 Delete link error 11 Invalid port ID 12 Block Link error
Arg2	<Not Used>
Returns	Success or Failure

AF Number	184
Name	Send Bind error PPL Event Indication to host <Arg1>
Description	This function sends Bind error PPL Event Indication to host
Arg1	1 = Layer 4 unable to bind/unbind to Layer 3
Arg2	<Not Used>
Returns	Success or Failure

AF Number	185
Name	Send Common Error PPL Event Indication to host <Arg1>
Description	This function sends Common Error PPL Event Indication to host
Arg1	Any one of the following: 1: V5.1FSM getting a bad input event 2: Variant and ID-mismatch 3: V5.1FSM reporting control protocol DL failure 4: V5.1 FSM timer expiry 5: V5.2 interface FSM receiving bad Input event. 6: Accelerated port Alignment failed.
Arg2	<Not Used>
Returns	Success or Failure

AF Number	191
Name	Check whether LE Side
Description	Checks whether LE side
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure

AF Number	201
Name	Sec C Channel to change the State to Alive from Active
Description	Allows the Sec C Channel to change state to Alive from Active only when the primary C Channel is already active, and also to set both the C Channel states appropriately
Arg1	<Not Used>
Arg2	<Not Used>
Returns	Success or Failure